(93 days)
No
The summary describes a mechanical dental abutment system and an induction heating device. There is no mention of AI or ML technology in the device description, intended use, or performance studies.
No
The device, Rodo Abutment System, is intended to provide support for crowns, bridges or overdentures in conjunction with compatible implant systems. It does not actively treat or cure any medical condition, which is the primary characteristic of a therapeutic device.
No
The device is an abutment system for dental implants, providing support for crowns, bridges, or overdentures. Its function is structural and mechanical, not for diagnosing medical conditions.
No
The device description explicitly lists multiple hardware components, including abutments, sleeves, copings, screws, and an induction heating device (Smilekey). The performance studies also focus on non-clinical testing of these physical components.
Based on the provided information, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- Intended Use: The intended use clearly states the device is for providing support for crowns, bridges, or overdentures in the maxillary or mandibular arch. This is a dental prosthetic device, not a device used to examine specimens derived from the human body to provide information for diagnosis, monitoring, or compatibility testing.
- Device Description: The description details the components of a dental abutment system used for supporting dental restorations. It does not mention any components or processes related to analyzing biological samples.
- Lack of IVD Indicators: There is no mention of analyzing blood, urine, tissue, or any other biological specimen. There is no mention of diagnostic purposes, disease detection, or monitoring of health conditions through the analysis of biological samples.
Therefore, the Rodo Abutment System falls under the category of a dental device used for restorative purposes, not an In Vitro Diagnostic device.
N/A
Intended Use / Indications for Use
Rodo Abutment System is intended to be used in conjunction with compatible implant systems in the maxillary or mandibular arch to provide support for crowns, bridges or overdentures.
Product codes (comma separated list FDA assigned to the subject device)
NHA
Device Description
The Rodo Abutment System includes the Rodo Abutment, Smileloc Sleeve, Titanium Coping, Temporary Cap, abutment screws, the Smileloc Activator (or Smileloc Remover) (all cleared under K160786) and Smilekey (cleared under K180609). The Smileloc Sleeve is used to lock and unlock the Titanium Coping for final restoration to or from the abutment. This makes the prosthesis removable. The Rodo Abutment System eliminates the need for an access hole on the occlusal surface of a screw-retained restoration and also eliminates the possibility of prosthetic screw loosening. The Smilekey is an induction heating device for dental prosthesis removal of the Smileloc Sleeve in the Rodo Abutment System. The Smilekey was cleared as an accessory to the Abutment System in K180609, and there have been no changes to the Smilekey since this clearance.
The Rodo Abutment is provided in five series designs (100 F, 200 P, 300 S, 400 M, 500 D) with the 200 P and 500 D series having angled abutments (17°, 30°), for a total of nine designs. The 300 S series is designed for limited occlusal space and the 400 M series is designed for large interproximal spaces. Abutments are available in sizes ranging from 3.0 mm to 6.0 mm depending on the compatible implant system in use. Designs are available with engaging and non-engaging implant-abutment interfaces.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
maxillary or mandibular arch
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
The company has submitted non-clinical testing data to demonstrate via dimensional analysis and reverse engineering that the company's Rodo Abutment System is substantially equivalent to the predicate abutment system (previously cleared under K160786) and is compatible with the new implant interfaces identified in the indications for use. The company has also submitted fatigue test data for testing conducted in accordance with ISO 14801, Dentistry - Implants - Dynamic loading test for endosseous dental implants, for use of the Rodo Abutment System with the Biohorizons Tapered Internal, Biomet 3i Certain Internal, and Neodent GM implant lines. The company also performed reverse engineering analysis for each of the three new compatible implant system interfaces. Reverse engineering was conducted for the original equipment manufacturer (OEM) implant bodies, OEM fixation screws, and OEM abutments. The reverse engineering testing approach followed is identical to that used in the previously cleared abutments (cleared under K160786).
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s): If the device was cleared using the 510(k) pathway, identify the Predicate Device(s) K/DEN number used to claim substantial equivalence and list them here in a comma separated list exactly as they appear in the text. List the primary predicate first in the list.
Reference Device(s): Identify the Reference Device(s) K/DEN number and list them here in a comma separated list exactly as they appear in the text.
K122300, K062636, K063341, K061629, K100724, K111216, K121787, K071638, K073268, K143022, K071638, K093321, K073268, K163194
Predetermined Change Control Plan (PCCP) - All Relevant Information for the subject device only (e.g. presence / absence, what scope was granted / cleared under the PCCP, any restrictions, etc).
Not Found
§ 872.3630 Endosseous dental implant abutment.
(a)
Identification. An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation.(b)
Classification. Class II (special controls). The guidance document entitled “Class II Special Controls Guidance Document: Root-Form Endosseous Dental Implants and Endosseous Dental Implant Abutments” will serve as the special control. (See § 872.1(e) for the availability of this guidance document.)
0
Image /page/0/Picture/0 description: The image contains the logo of the U.S. Food and Drug Administration (FDA). On the left is the Department of Health & Human Services logo. To the right of that is the FDA logo, with the letters "FDA" in a blue square. Next to that is the text "U.S. FOOD & DRUG ADMINISTRATION" in blue.
February 27, 2020
Rodo Medical, Inc. % Randy Prebula Partner Hogan Lovells US LLP 555 13th St. NW Washington, District of Columbia 20004
Re: K193274
Trade/Device Name: Rodo Abutment System Regulation Number: 21 CFR 872.3630 Regulation Name: Endosseous Dental Implant Abutment Regulatory Class: Class II Product Code: NHA Dated: February 10, 2020 Received: February 10, 2020
Dear Randy Prebula:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database located at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
1
ence determination does not mean that FDA
Page 2
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR 803) for devices or postmarketing safety reporting (21 CFR 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reportingcombination-products); good manufacturing practice requirements as set forth in the quality systems (OS) regulation (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-device-safety/medical-device-reportingmdr-how-report-medical-device-problems.
For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medicaldevices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-device-advice-comprehensive-regulatoryassistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100).
Sincerely.
for Srinivas Nandkumar, Ph.D. Director DHT1B: Division of Dental Devices OHT1: Office of Ophthalmic, Anesthesia, Respiratory, ENT and Dental Devices Office of Product Evaluation and Ouality Center for Devices and Radiological Health
Enclosure
2
510(k) Number (if known)
K193274
Device Name
Rodo Abutment System
Indications for Use (Describe)
Rodo Abutment System is intended to be used in conjunction with compatible implant systems in the maxillary or mandibular arch to provide support for crowns, bridges or overdentures.
Compatible Systems | ||
---|---|---|
Implant Line | OEM Platform Size | OEM Body Size |
Straumann Bone Level | NC, RC | 3.3, 4.1, 4.8 |
Neodent Drive CM | 3.5, 4.3, 5.0 | 3.5, 4.3, 5.0 |
Neodent Titamax CM | 3.5, 3.75, 4.0, 5.0 | 3.5, 3.75, 4.0, 5.0 |
Neodent Alvim CM | 3.5, 4.3, 5.0 | 3.5, 4.3, 5.0 |
NobelActive | 3.0, NP, RP, WP | 3.0, 3.5, 4.3, 5.0, 5.5 |
Nobel Replace Conical | NP, RP | 3.5, 4.3, 5.0 |
NobelReplace Straight | NP, RP, WP | 3.5, 4.0, 5.0 |
NobelReplace Tapered | NP, RP, WP, 6.0 | 3.5, 4.3, 5.0, 6.0 |
NobelSpeedy Replace | NP, RP, WP, 6.0 | 3.5, 4.0, 5.0, 6.0 |
Biohorizons Tapered Internal | 3.0, 3.5, 4.5, 5.7 | 3.0, 3.4, 3.8, 4.6, 5.8 |
Biomet 3i Certain Internal | 3.4, 4.1, 5.0, 6.0 | 3.25, 3.4, 4.1, 5.0, 6.0 |
Neodent GM | 3.5 | 3.5, 3.75, 4.0, 4.3, 5.0, 6.0 |
Type of Use (Select one or both, as applicable)
X Prescription Use (Part 21 CFR 801 Subpart D)
_ Over-The-Counter Use (21 CFR 801 Subpart C)
CONTINUE ON A SEPARATE PAGE IF NEEDED.
This section applies only to requirements of the Paperwork Reduction Act of 1995.
DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.
The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:
Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff@fda.hhs.gov
"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number
3
510(k) SUMMARY Rodo Medical's Rodo Abutment System (K193274)
Submitter:
Rodo Medical Inc. 6399 San Ignacio Ave., Suite 100 San Jose, CA 95119 Telephone: +1 (408) 245-7636 Fax: +1 (408) 338-6940
Contact Person: James Park, Vice President of R&D and Education
Date Prepared: February 27, 2020
Name of Device: Rodo Abutment System
Common or Usual Name: Endosseous dental implant abutment
Classification Name: Endosseous dental implant abutment
Regulation Number: 21 CFR 872.3630
Class: Class II
Product Code: NHA
Primary Predicate Device
Rodo Medical Abutment System, K160786
Reference Devices
Biomet Certain Internal Connection Implants, K122300, K062636, K063341, K061629, K100724, K111216
BioHorizons Tapered Internal Connection Implants, K121787, K071638, K073268, K143022, K071638, K093321, K073268
Neodent GM Connection Implants, K163194
4
Device Description
The purpose of this submission is to obtain U.S. premarket clearance for the Rodo Abutment System's use with three newly added compatible implant lines: Biohorizons Tapered Internal; the Biomet 3i Certain Internal; and the Neodent GM. With the exception of minor dimensional changes to the Rodo Abutments to accommodate the newly identified compatible implant lines, the Rodo Abutment System remains technologically identical to the predicate Rodo Abutment System.
The Rodo Abutment System includes the Rodo Abutment, Smileloc Sleeve, Titanium Coping, Temporary Cap, abutment screws, the Smileloc Activator (or Smileloc Remover) (all cleared under K160786) and Smilekey (cleared under K180609). The Smileloc Sleeve is used to lock and unlock the Titanium Coping for final restoration to or from the abutment. This makes the prosthesis removable. The Rodo Abutment System eliminates the need for an access hole on the occlusal surface of a screw-retained restoration and also eliminates the possibility of prosthetic screw loosening. The Smilekey is an induction heating device for dental prosthesis removal of the Smileloc Sleeve in the Rodo Abutment System. The Smilekey was cleared as an accessory to the Abutment System in K180609, and there have been no changes to the Smilekey since this clearance.
The Rodo Abutment is provided in five series designs (100 F, 200 P, 300 S, 400 M, 500 D) with the 200 P and 500 D series having angled abutments (17°, 30°), for a total of nine designs. The 300 S series is designed for limited occlusal space and the 400 M series is designed for large interproximal spaces. Abutments are available in sizes ranging from 3.0 mm to 6.0 mm depending on the compatible implant system in use. Designs are available with engaging and non-engaging implant-abutment interfaces.
Indications for Use
Compatible Systems | ||
---|---|---|
Implant Line | OEM Platform Size | OEM Body Size |
Straumann Bone Level | NC, RC | 3.3, 4.1, 4.8 |
Neodent Drive CM | 3.5, 4.3, 5.0 | 3.5, 4.3, 5.0 |
Neodent Titamax CM | 3.5, 3.75, 4.0, 5.0 | 3.5, 3.75, 4.0, 5.0 |
Neodent Alvim CM | 3.5, 4.3, 5.0 | 3.5, 4.3, 5.0 |
NobelActive | 3.0, NP, RP, WP | 3.0, 3.5, 4.3, 5.0, 5.5 |
Nobel Replace Conical | NP, RP | 3.5, 4.3, 5.0 |
NobelReplace Straight | NP, RP, WP | 3.5, 4.0, 5.0 |
NobelReplace Tapered | NP, RP, WP, 6.0 | 3.5, 4.3, 5.0, 6.0 |
NobelSpeedy Replace | NP, RP, WP, 6.0 | 3.5, 4.0, 5.0, 6.0 |
Biohorizons Tapered Internal | 3.0, 3.5, 4.5, 5.7 | 3.0, 3.4, 3.8, 4.6, 5.8 |
Biomet 3i Certain Internal | 3.4, 4.1, 5.0, 6.0 | 3.25, 3.4, 4.1, 5.0, 6.0 |
Neodent GM | 3.5 | 3.5, 3.75, 4.0, 4.3, 5.0, 6.0 |
The Rodo Abutment System is intended to be used in coniunction with compatible implant systems in the maxillary or mandibular arch to provide support for crowns, bridges or overdentures.
5
Summary of Technological Characteristics
The predicate device and the subject device are technologically identical, with only minor dimensional changes to the Rodo Abutments to accommodate the newly identified compatible These dimensional changes were conducted to accommodate the newly added implant lines. implant interfaces for the three additional compatible implant lines: Biohorizons Tapered Internal; the Biomet 3i Certain Internal; and the Neodent GM. No other changes were made other than referenced minor dimensional changes to add compatibilities to the newly added implant interfaces.
The predicate device and the subject device are abutments used in conjunction with compatible implant systems in the maxillary or mandibular arch to provide support for crowns, bridges or overdentures.
All reference devices that are identified in this submission are for the 510(k) clearances of the newly compatible implant bodies.
Performance Data
The company has submitted non-clinical testing data to demonstrate via dimensional analysis and reverse engineering that the company's Rodo Abutment System is substantially equivalent to the predicate abutment system (previously cleared under K160786) and is compatible with the new implant interfaces identified in the indications for use. The company has also submitted fatigue test data for testing conducted in accordance with ISO 14801, Dentistry - Implants - Dynamic loading test for endosseous dental implants, for use of the Rodo Abutment System with the Biohorizons Tapered Internal, Biomet 3i Certain Internal, and Neodent GM implant lines.
The company also performed reverse engineering analysis for each of the three new compatible implant system interfaces. Reverse engineering was conducted for the original equipment manufacturer (OEM) implant bodies, OEM fixation screws, and OEM abutments. The reverse engineering testing approach followed is identical to that used in the previously cleared abutments (cleared under K160786).
The minor dimensional changes to the Rodo Abutments to accommodate the newly identified compatible implant lines did not necessitate re-testing for those tests completed and provided in the predicate 510(k) submission (e.g., sterilization, biocompatibility, electrical safety analysis, thermal properties testing, corrosion testing, and retention testing).
Conclusions
The subject device and the predicate device are technologically identical and include almost identical indications for use. The only difference is that the subject device expands the number of identified compatible implants and includes abutments that have been reverse engineered to interact with the new implant interfaces being identified. The subject device and predicate device abutments encompass the same range of physical dimensions, including diameter, gingival height, and angle of the abutments.
6
The data included in this submission demonstrate substantial equivalence to the predicate Rodo Abutments.