Search Results

General Total Knee Arthroplasty (TKR) Indications:
• Painful, disabling joint disease of the knee resulting from: noninflammatory degenerative joint disease (including osteoarthritis, traumatic arthritis, or avascular necrosis), rheumatoid arthritis or post-traumatic arthritis.
· Post-traumatic loss of knee joint configuration and function.
· Moderate varus, valgus, or flexion deformity in which the ligamentous structures can be returned to adequate function and stability.
· Revision of previous unsuccessful knee replacement or other procedure.

• Fracture of the distal femur and/or proximal tibia that cannot be standard fracture -management techniques.
  The Triathlon® Tritanium® Total Knee System components are indicated for both uncemented use. The Triathlon® Total Knee System beaded with Peri-Apatite components are intended for uncemented use only.
  The Triathlon® All Polyethylene tibial components are indicated for cemented use only.
  Additional Indications for Posterior Stabilized (PS) and Total Stabilizer (TS) Components:
• · Ligamentous instability requiring implant bearing surface geometries with increased constraint.
• · Absent or non-functioning posterior cruciate ligament.
  · Severe anteroposterior instability of the knee joint.
  Additional Indications for Total Stabilizer (TS) Components:
  · Severe instability of the knee secondary to compromised collateral ligament integrity or function.
  Indications for Bone Augments:
  · Painful, disabling joint disease of the knee secondary to: degenerative arthritis, rheumatic arthritis, complicated by the presence of bone loss.
  · Salvage of previous unsuccessful total knee replacement or other surgical procedure, accompanied by bone loss.
  Additional Indications for Cone Augments:
• · Severe degeneration or trauma requiring extensive resection and replacement
• · Femoral and Tibial bone voids
• Metaphyseal reconstruction
  The Triathlon TS Cone Augment components are intended for cemented or cementless use.

Triathlon Pro Posterior Stabilized Femoral Components Indications for Use:
General Total Knee Arthroplasty (TKR) Indications:
· Painful, disabling joint disease of the knee resulting from: noninflammatory degenerative joint disease (including osteoarthritis, traumatic arthritis, or avascular necrosis), rheumatoid arthritis or post-traumatic arthritis.

• · Post-traumatic loss of knee joint configuration and function.
  · Moderate varus, valgus, or flexion deformity in which the ligamentous structures can be returned to adequate function and stability.
  · Revision of previous unsuccessful knee replacement or other procedure.
  · Fracture of the distal femur and/or proximal tibia that cannot be standard fracture -management techniques. Additional Indications for Posterior Stabilized (PS) components:
• · Ligamentous instability requiring implant bearing surface geometries with increased constraint.
• · Absent or non-functioning posterior cruciate ligament.
• · Severe anteroposterior instability of the knee joint.
  The Triathlon® Pro PS Femoral Components are intended for cemented use only.

Triathlon Tritanium Tibial Baseplate Indications for Use:
General Total Knee Arthroplasty (TKR) Indications:
· Painful, disabling joint disease of the knee resulting from: non-inflammatory degenerative joint disease (including osteoarthritis, traumatic arthritis or avascular necrosis) or rheumatoid arthritis

• · Post-traumatic loss of knee joint configuration and function
• · Moderate varus, valgus, or flexion deformity in which the ligamentous structures can be returned to adequate function and stability
• · Revision of previous unsuccessful knee replacement or other procedure
• · Fracture of the distal femur and/or proximal tibia that cannot be standard fracture management techniques
  Additional General Total Knee Arthroplasty (TKR) Indications specific to the PS implant:
• · Ligamentous instability requiring implant bearing surface geometries with increased constraint
• Absent or non-functioning posterior cruciate ligament
• · Severe anteroposterior instability of the knee joint
  The Triathlon Tritanium Tibial Baseplates are indicated for both cemented and uncemented use.

Triathlon Low Profile Tibial Tray Indications for Use:
The Triathlon Low Profile Tibial Tray is intended to be used with commercially available Triathlon® femoral components and associated patellar components, and tibial bearing inserts in primary cemented total knee arthroplasty. The indications for the Triathlon® Low Profile Tibial Tray are outlined below:
Indications for Use:
· Painful, disabling joint disease of the knee resulting from: degenerative arthritis, rheumatoid arthritis or post-traumatic arthritis.
· Post-traumatic loss of knee joint configuration and function.
· Moderate varus, valgus, or flexion deformity in which the ligamentous structures can be returned to adequate function and stability.

Triathlon Metal Backed Patella Indications for Use:

• · Noninflammatory degenerative joint disease including osteoarthritis or avascular necrosis;
• Rheumatoid arthritis;
• · Correction of functional deformity;
• · Revision procedures where other treatments or devices have failed;
• · Post traumatic loss of joint anatomy, particularly when there is patello-femoral erosion, dysfunction or prior patellectomy; and,
• · Irreparable fracture of the knee.
  These products are intended to achieve fixation without the use of bone cement.

Triathlon Partial Knee System Indications for Use:
Moderately disabling joint disease of the knee resulting from painful osteo- or post traumatic arthritis
· Revision of previous unsuccessful surgical procedures, either involving, or not involving, previous use of a unicompartmental knee prosthesis
· As an alternative to tibial osteotomy in patients with unicompartmental osteoarthritis
· Where bone stock is of poor quality or inadequate for other reconstructive techniques as indicated by deficiencies of the femoral condyle/tibial plateau.
These components are intended for implantation with bone cement.

Avon Patello-femoral Joint Prosthesis Indications for Use:
The Avon Patello-femoral Joint Prosthesis is intended to be used in cemented patellofemoral arthroplasty in patients with degenerative arthritis in the distal femur and patients with a history of patellar dislocation or patella fracture, or patients with failed previous surgery (arthroscopy, tibial tubercle elevation, lateral release) where pain, deformity, or dysfunction persists. These components are single use only and are intended for implantation with bone cement.

Restoris Multi-Compartmental Knee System Indications for Use:
Restoris MCK is indicated for single or multi-compartmental knee replacement used in conjunction with RIO, the Robotic Arm Interactive Orthopedic System, in individuals with osteoarthritis of the tibiofemoral and/or patellofemoral articular surfaces.
The specific knee replacement configurations include:

• Medial unicondylar
• Lateral unicondylar
• Patellofemoral
• · Medial bi-compartmental (medial unicondylar and patellofemoral)
  Restoris Multi Compartmental Knee is for single use only and is intended for implantation with bone cement.

All of the subject devices have been found substantially equivalent in previous 510(k)s. All the subject devices have been cleared for MR conditional labeling in previous 510(k)s. The purpose of this submission is to modify the MR conditional information in the instructions for use to update the parameters in which a patient who has the device can be safely scanned, per testing conducted accordance to updated FDA guidance. There have been no changes made to the devices requiring 510(k) clearance - only the MR conditional information in the instruction for use is being modified.
An additional contraindication is being added to the components of the Triathlon Total Knee System. This contraindication regarding material sensitivity to implant materials is being added.

This document is a 510(k) premarket notification for knee arthroplasty devices, specifically for the Triathlon Knee System and related components. It is important to note that this document does NOT describe a study evaluating the performance of a device driven by an AI algorithm or software.

Instead, this submission is for physical medical devices (knee implants) and their associated labeling. The core purpose of this 510(k) submission is to modify the MR conditional information in the instructions for use for these existing, previously cleared devices due to updated FDA guidance on MR safety testing. The document explicitly states:

• "There have been no changes made to the devices requiring 510(k) clearance - only the MR conditional information in the instruction for use is being modified." (Page 16)
• "There have been no changes requiring 510(k) clearance to the technological characteristics of the Stryker Knee systems as a result of the revision to the labeling." (Page 19)
• "Clinical testing was not required as a basis for substantial equivalence." (Page 20)

Therefore, the requested information regarding "acceptance criteria and the study that proves the device meets the acceptance criteria" in the context of an AI-driven device's performance (e.g., accuracy, sensitivity, specificity, human-in-the-loop studies) cannot be extracted from this document, as it pertains to entirely different types of evaluation (mechanical performance, biocompatibility, and in this specific case, MR safety of physical implants, not AI algorithm performance).

To explicitly answer your questions based on the provided document, even if they don't fully apply to the nature of this submission:

1. A table of acceptance criteria and the reported device performance:

   • Acceptance Criteria (Implicit for this submission): The new MR safety testing results must demonstrate that the device is safe for use in an MR environment under the updated parameters to justify the labeling changes, and that the device remains substantially equivalent to its predicates.
   • Reported Device Performance: The document states: "New testing was performed to comprehensively assess the RF-related heating effects induced by the subject devices when implanted into bone, following the FDA guidance document, "Testing and Labeling Medical Devices for Safety in the Magnetic Resonance (MR) Environment," dated May 20, 2021." (Page 19). While the specific quantitative results of this testing are not provided in this summary document, the FDA's clearance (the letter at the beginning) implies the acceptance criteria for MR safety were met.

2. Sample sized used for the test set and the data provenance:

   • This document describes non-clinical (laboratory) testing for MR safety. It does not involve "test sets" in the sense of patient data for AI evaluation. The "sample size" would refer to the number of physical implants tested for MR compatibility. This specific number is not provided in the summary.
   • Data Provenance: N/A for clinical data; the testing was performed per FDA guidance, implying controlled laboratory conditions.

3. Number of experts used to establish the ground truth for the test set and the qualifications of those experts:

   • N/A. This is not a study requiring expert readers or ground truth establishment in the context of AI performance. The "ground truth" for MR safety is established by quantitative measurements in a laboratory setting based on physics principles and regulatory standards.

4. Adjudication method (e.g. 2+1, 3+1, none) for the test set:

   • N/A. Not a clinical study requiring human adjudication.

5. If a multi reader multi case (MRMC) comparative effectiveness study was done, If so, what was the effect size of how much human readers improve with AI vs without AI assistance:

   • No. This document does not pertain to AI or human reader performance.

6. If a standalone (i.e. algorithm only, without human-in-the-loop performance) was done:

   • No. This document does not describe an algorithm.

7. The type of ground truth used (expert concensus, pathology, outcomes data, etc):

   • N/A for artificial intelligence context. The ground truth for this submission relates to physical properties and safety in an MR environment, established through standardized physical testing and engineering measurements.

8. The sample size for the training set:

   • N/A. There is no training set mentioned or implied for an AI algorithm in this submission.

9. How the ground truth for the training set was established:

   • N/A. There is no training set mentioned or implied.

In summary, this 510(k) notification is for knee replacement components and deals with updating their MR conditional labeling based on physical testing, not with the performance evaluation of an AI-powered device.

Ask a specific question about this device

RESTORIS™ Multicompartmental Knee (MCK) System is indicated for single or multi-compartmental knee replacement used in conjunction with RO®, the Robotic Arm Interactive Orthopedic System, in individuals with osteoarthritis or posttraumatic arthritis of the tibiofemoral and/or patellofemoral articular surfaces. The specific knee replacement configurations include:

• · Medial unicondylar
• · Lateral unicondylar
• · Patellofemoral
• · Medial bi-compartmental (medial unicondylar and patellofemoral)

RESTORIS™ Multicompartmental Knee (MCK) System is for single use only and is intended for implantation with bone cement.

The purpose of this Changes Being Effected premarket notification is to add a contraindication for the Restoris Multicompartmental Knee (MCK) System. Additionally, minor modifications are being made to the contraindications for clarity. There is no change to the intended use, indications, design, technological characteristics or operational principles for the devices. The subject implant components are identical to the predicate components. The Restoris MCK system was most recently cleared in K180612, and has also been cleared previously in K172326, K150307, K090763, K082172, K082088, K082081, and K080368.

This FDA 510(k) submission [K220930] for the Restoris Multi-Compartmental Knee System does not contain any information regarding acceptance criteria or a study proving the device meets acceptance criteria.

The document explicitly states:

• "The purpose of this Changes Being Effected premarket notification is to add a contraindication for the Restoris Multicompartmental Knee (MCK) System. Additionally, minor modifications are being made to the contraindications for clarity." (Page 4)
• "There is no change to the intended use, indications, design, technological characteristics or operational principles for the devices." (Page 4)
• "No additional testing was performed as part of this submission, as the only changes being made are to the labeling for the devices. There is no impact to the device design or the physical characteristics of the devices. Testing submitted as part of previously cleared premarket notifications is applicable to this submission." (Page 5)

Therefore, based on the provided text, I cannot fill in the requested information about acceptance criteria and study results because this particular 510(k) submission is for a labeling change and explicitly states that no new testing was performed. The performance data and acceptance criteria would have been part of previous 510(k) submissions (e.g., K180612, K172326, etc.) referenced in this document.

Ask a specific question about this device