Search Filters

Search Results

Found 1 results

510(k) Data Aggregation

    K Number
    K152715
    Date Cleared
    2016-02-25

    (157 days)

    Product Code
    Regulation Number
    880.6250
    Reference & Predicate Devices
    Predicate For
    N/A
    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    Nitrile Powder Free Patient Examination Gloves, Blue Color is a non-sterile disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner.

    Device Description

    Nitrile films form a barrier to body fluids and bloodborne Pathogens. The nitrile rubber is water tight under normal conditions of use. It's tensile properties cause it to conform to the hand, allowing movements necessary for a medical procedure. Nitrile glove is known to create a barrier to bloodborne pathogens and body fluids. ASTM conforming tensile properties create a glove that is strong and flexible. The glove is manufactured in accordance with the requirements of ASTM D6319 and ASTM D5151 requirements.

    AI/ML Overview

    The provided document describes a 510(k) premarket notification for "Nitrile Powder Free Patient Examination Gloves, Blue Color," which is a Class I medical device. The document primarily focuses on demonstrating substantial equivalence to a predicate device, rather than describing a study to prove performance against acceptance criteria for an AI/ML powered device.

    Therefore, many of the requested fields are not applicable to this document. I will extract the available information and indicate where information is not present or not relevant to an AI/ML context.


    1. Table of Acceptance Criteria and Reported Device Performance

    CharacteristicsAcceptance Criteria (Standard)Reported Device Performance
    DimensionASTM standard D 6319-10Meets
    Physical PropertiesASTM standard D 6319-10Meets
    Freedom from pinholes21 CFR 800.20 and ASTM D5151-06 (Reapproved 2011) (Holes at Inspection Level I AQL 2.5)Meets ASTM D5151-06 (Reapproved 2011), AQL 2.5
    Powder ResidualASTM standard D 6319-10 and D6124-06 (Reapproved 2011)Meets (
    Ask a Question

    Ask a specific question about this device

    Page 1 of 1