Search Results

Ditron's Dental Implants and Abutments are indicated for use in surgical and restorative applications for placement in the bone of the upper or lower jaw to provide support for prosthetic devices, such as artificial teeth, in order to restore the chewing function of patients with fully or partially edentulous: - Two stages: MPI, ULT, API, CPI, MPC, APC, CPC and UPC models . - . One stage: OPI and TPI models The 3.3mm and 3.0mm diameter implants (OPI and TPI. MPI and API) are intended only for the incisors and cuspids of the maxilla and mandible. They are also indicated for denture stabilization using multiple implants. The Two stages and One stage implants are indicated for temporary or long-term use. They are selftapping titanium threaded screws indicated for long term intra bony applications. They permit immediate splint stability and long-term fixation of new or existing crown, bridge and prosthesis and protection of graft sites. MPI, ULT, API, CPI, OPI, TPI, MPC, APC, CPC and UPC models are indicated for immediate loading (except for MPI. and API 6mm length) in single- and multi-tooth restoration, when good primary stability is achieved and with appropriate occlusal loading. The 30-degree multi-unit abutments must be used within 45 degrees of parallelism for a splinted restoration. The 17-degree multi-unit abutments must be used within 32 degrees of parallelism for a splinted restoration. The Temporary Titanium and PEEK Abutments are indicated to be used on Ditron implants to provide temporary support for prosthesis structure for up to 6 months. They can be used in one or two stage procedures and also immediate load when there is good primary stability.

This submission covers changes related to Ditron's Dental implants and abutments. The inclusion of additional product variations aims to provide dental surgeons with a broader range of implant and abutment options for patient treatment. The requested additions to Ditron's Dental Implants and Abutments within this 510(k) are hereby described: . An additional implant types: - MPC (Conical Connection Molecular Precision Implant) o - O APC (Conical Connection Advanced Precision Implant) - UPC (Conical Connection Ultimate Precision Implant) O - CPC (Conical Connection Cylindrical Precision Implant) O The Conical Connection (CC) implants include a conical connection platform (Morse taper). The intended use, materials, drilling protocol, thread designs and bone interface of the subject Conical Connection implants (MPC, UPC, APC and CPC) are identical to Ditron's cleared Internal Hex connection platform implants (MPI, ULT, API and CPI, respectively). The CC implants include color anodization for aesthetic purposes. The CC compatible Cover and Prosthetic Screws are color anodized as well. The MPC/APC/CPC/UPC Implants are available in diameters of 3.5mm, 4.2mm, 5.0mm, and 6.0mm, with lengths of 8.0mm, 11.5mm, 12mm, 13mm, 14mm, and 16mm. Additionally, a 6.5mm length is offered for MPC/APC/CPC implants in 4.2mm, 5.0mm, and 6.0mm diameters, and a 7.0mm length is available for UPC implants in 4.2mm, 5.0mm, and 6.0mm diameters. - An additional Abutment type: CC Healing Caps and SRA Healing Caps Abutments The CC Healing Caps are color-anodized for aesthetic purposes. They are used for the maintenance of the soft tissue during the osseointegration phase of Ditron CC implants to be rehabilitated using technique. They are available in diameters of 3.5, 4.5 and 5.5mm and the following gingival heights: 0.8, 1.5, 2.5, 3.5 and 4.5mm. - An additional Abutment type: CC Cement Retained Abutments the CC Anatomic/Universal . straight/angulated abutments are Cement-Retained Abutments. They are intermediary prosthetic components to be installed onto Ditron's CC implants to support the final prosthesis. They are available as straight (0°) or angulated (15° and 25°) in diameters: 3.5, 4.5 and 5.5mm and the following gingival heights: 0.8, 1.5, 2.5, 3.5, 4.5 mm. - . An additional Abutment type: CC Single-Unit and Multi-Unit Abutments - The CC Screw-retained Single Unit Abutment and Multi Unit Abutments are intermediary prosthetic components to be installed onto CC Ditron's implants to support the final prosthesis. They are available as straight (0°) or angulated (17° and 30°) and the following gingival heights: 0.8, 1.5, 2.5, 3.5, 4.5, 5.0 mm. The Single Unit abutment height is up to 4.5mm only. - An additional Abutment type: CC Temporary Titanium Abutments The CC Temporary Titanium Abutments are temporary intermediary prosthetic components to be installed onto the Ditron's CC implants to support the provisional prosthesis for up to 6 months. They are available as straight (0°) in diameters: 3.5 and 4.5mm and the following gingival heights: 0.8, 1.5, 2.5, 3.5, 4.5mm. - An additional Abutment type: CC Temporary PEEK Abutments The CC Temporary PEEK Abutments are temporary intermediary prosthetic components to be installed onto Ditron's CC implants to support the provisional prosthesis for up to 6 months. They are composed of a customizable cylindrical body made of PEEK and a non-customizable base made of titanium. They are available in diameters of 4.5 and 6.0mm and the following gingival heights: 0.8, 1.5, 2.5, 3.5, 4.5, 5.5mm. - An additional Abutment type: CC Liberator Overdenture Abutment The CC Liberator Overdenture Abutment is similar in design to Ditron's cleared Liberator abutment, except for the addition of Titanium Nitride (TiN) coating on the subject device. It is available in the following gingival heights: 0.5, 1.0, 2.0, 3.0, 4.0, 5.0 and 6.0mm. - An additional Abutment type: SRA Titanium Coping Abutments The SRA Titanium Coping . Abutment is suitable for use with the CC Screw-retained single Abutments. It connects to the abutment using one of the designated abutment screws. They are available in short (L4.85mm) and long (L11mm) versions. - Modification to Cleared Titanium Abutments Addition of Laser Marking for identification as an option for all of the Ditron Dental cleared Titanium Abutments (K140728, K161497, K233231). - Modification to Cleared Liberator and TPI Overdenture Abutments Addition of TiN coating to . Ditron's cleared Liberator abutment (K161497) and the cleared TPI Liberator Overdenture Abutment (K233231).

Ditron's Dental Implants and Abutments are indicated for use in surgical and restorative applications for placement in the bone of the upper or lower jaw to provide support for prosthetic devices, such as artificial teeth, in order to restore the patient's chewing function. · Two stage: MPI, ULT, API and CPI models - · One stage: OPI and TPI models The 3.3 and 3.0mm diameter models for One stage OPI and TPI, Two stage and API implants are intended only for the incisors and cuspids of the maxilla and mandible. They are also indicated for denture stabilization using multiple implants. Two stage and One stage implants for temporary or long-term use: MPI, ULT, API, CPI, OPI and TPI are self-tapping Titanium threaded screws indicated for long term intra bony applications. They permit immediate splint stability and longterm fixation of new or existing crown, bridge and prosthesis and protection of graft sites. MPI, ULT, API, CPI, OPI and TPI designs are indicated for immediate loading (except for MPI and API in 6.0mm length) when good primary stability is achieved and with appropriate occlusal loading. MPI, ULT, API, CPI, OPI and TPI are indicated for immediate loading (except for MPI and API in 6.0mm length) in single tooth restorations when good primary stability is achieved with appropriate occlusal loading. The 30-degree multi-unit abutments must be used within 45 degrees of parallelism for a splinted restoration. The 17-degree multi-unit abutments must be used within 32 degrees of parallelism for a splinted restoration.

This submission covers changes related to Ditron's Dental implants and abutments. The inclusion of additional product variations aims to provide dental surgeons with a broader range of implant and abutment options for patient treatment. The requested additions to Ditron's Dental Implants and Abutments within this 510(k) are hereby described: . An additional implant type: TPI (Tissue Level (One Piece) Precision Implant) -The TPI design is based on Ditron's cleared MPI Implant model and the 3.0mm Straight Multi-Unit Abutment, creating a one-piece implant. The TPI's implant part is identical to the cleared MPI Implant model, and the 3.0mm MPI Straight Multi-unit part has minor dimensional modifications and color anodization for aesthetic purposes. The TPI compatible Cover and Prosthetic Screws are color anodized as well. An additional Abutment type: TPI Healing Caps Abutment -● The TPI Healing Caps design is based on Ditron's cleared Cylindered Healing Caps. The TPI Healing Caps are color-anodized for aesthetic purposes. The TPI Healing Caps Abutments are available in several Gingival height dimensions of 3.5, 4.5 and 5.5mm. - . Modification to Cleared Titanium Abutments – Addition of color anodization as an option for all of the Ditron Dental System Titanium Alloy Grade 23 (Ti 6Al-4V ELI) Abutments cleared under K140727 and K161497, to enhance the aesthetic outcome of the dental prosthetics. - An additional Abutment type: TPI Titanium Coping Abutments The TPI ● Titanium Coping Abutment design is based on Ditron's cleared Temporary Abutment. The TPI Titanium Coping Abutments are directly connected to the endosseous dental implant and are intended to provide a basis for prosthetic restoration of single (Crown) or multiple teeth (Bridge). The TPI Titanium Coping Abutment is available in several lengths and restoration options: 11.0mm Bridge, 11.0 Crown, 4.5mm Bridge, 4.5mm Crown. - An additional Abutment type: TPI Overdenture Liberator Abutment The TPI ● Overdenture Liberator Abutment design is based on Ditron's cleared Liberator Abutment. The Liberator Abutment is available in several length dimensions of 2.0, 3.0, 4.0 and 5.0mm.