(163 days)
No
The device description and intended use are for a conventional guidewire with no mention of AI/ML capabilities or image processing beyond standard fluoroscopic visibility.
No
Explanation: This device is a guidewire used to facilitate the placement of other intravascular devices during angioplasty. It does not directly treat a condition but rather assists in the delivery of a therapeutic device.
No
The device is a guidewire intended to facilitate the placement of other intravascular devices, such as balloon dilatation catheters. Its function is to provide a guide for these devices, not to diagnose a condition.
No
The device description clearly details a physical guidewire constructed of stainless steel, PTFE coating, coils, and solder, indicating it is a hardware device, not software-only.
No, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- IVD Definition: In Vitro Diagnostics are devices intended for use in the collection, preparation, and examination of specimens taken from the human body (such as blood, urine, or tissue) to provide information for the diagnosis, treatment, or prevention of disease.
- Device Description and Intended Use: The provided information clearly describes a medical device used directly within the body (intravascularly) to facilitate procedures like angioplasty. It is a physical tool used to guide other devices.
- Lack of Specimen Analysis: There is no mention of collecting or analyzing any biological specimens from the patient.
Therefore, based on the provided information, the BridgePoint Medical Entera guidewire is a medical device, not an In Vitro Diagnostic.
N/A
Intended Use / Indications for Use
The BridgePoint Medical Entera™ guidewires are intended to facilitate placement of balloon dilatation catheters or other intravascular devices during percutaneous transluminal coronary angioplasty (PTCA) and percutaneous transluminal angioplasty (PTA). The Entera guidewires are not to be used in cerebral blood vessels.
Product codes
DQX
Device Description
The Entera is a conventionally constructed 0.014" diameter single use disposable guidewire that consists of a full length stainless steel shaft with proximal PTFE coating where the distal portion of the shaft is taper ground to provide distal flexibility. The distal portion also includes coaxially positioned coils, constructed of stainless steel and Pt/W for visibly under fluoroscopy. The coils are fixed to the stainless core via silver alloy solder and are optionally coated with silicone (Lake Region Medical MDX). The distal tip of the guidewire is supplied in a straight or angled geometry which transitions to a conventional rounded tip. A short extension with an approximate diameter of 0.0032" (which is a monolithic extension of the core wire) extends approximately 0.007" distal of the Entera rounded tip.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
fluoroscopy
Anatomical Site
coronary and peripheral vasculature (not cerebral blood vessels)
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
Not Found
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s)
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 870.1330 Catheter guide wire.
(a)
Identification. A catheter guide wire is a coiled wire that is designed to fit inside a percutaneous catheter for the purpose of directing the catheter through a blood vessel.(b)
Classification. Class II (special controls). The device, when it is a torque device that is manually operated, non-patient contacting, and intended to manipulate non-cerebral vascular guide wires, is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 870.9.
0
3. 510(k) SUMMARY
OCT 0 8 2008
This summary of 510(k) safety and effectiveness information is submitted in accordance with the requirements of SMDA 1990 and 21 CFR 807.92.
K 081187 510(k) Number: TBD
Applicant Information:
| Date Prepared: | April 26, 2008 |
|---|---|
| Name: | BridgePoint Medical |
| Address: | 2800 Campus Drive, #50 |
| Plymouth, MN 55441 | |
| Phone: 763-225-8500 | |
| Fax: 763-225-8718 | |
| Email: info@bridgepointmedical.com | |
| Contact Person: | Michael A. Daniel |
| Contact Person: | Michael A. Daniel |
|---|---|
| Phone Number: | Office: 925-254-5228 / Cell 415-407-0223 |
| Facsimile Number: | (925) 254-5187 |
Device Information:
| Classification: | Class II Percutaneous Guidewire / DQX / 870.1330 |
|---|---|
| Trade Name: | BridgePoint Medical Entera™ Percutaneous Coronary and Peripheral |
| Guidewire | |
| Common Name: | Percutaneous Guidewire |
| Classification Name: | Percutaneous Guidewire |
Predicate Devices:
The BridgePoint Medical Entera Guidewire is substantially equivalent in intended use, method of operation and technical aspects to a combination of the following predicate devices:
K970376 - Lake Region PTCA guidewire/Triumph K073082 - Cordis/Brivant, Ltd. Regatta Steerable Guidewire K041531 - Asahi PTCA Guidewire Confianza Pro
BridgePoint Medical 510(k) Submission 800-0003-01 April 26, 2008
1
Device Description:
The Entera is a conventionally constructed 0.014" diameter single use disposable guidewire that consists of a full length stainless steel shaft with proximal PTFE coating where the distal portion of the shaft is taper ground to provide distal flexibility. The distal portion also includes coaxially positioned coils, constructed of stainless steel and Pt/W for visibly under fluoroscopy. The coils are fixed to the stainless core via silver alloy solder and are optionally coated with silicone (Lake Region Medical MDX). The distal tip of the guidewire is supplied in a straight or angled geometry which transitions to a conventional rounded tip. A short extension with an approximate diameter of 0.0032" (which is a monolithic extension of the core wire) extends approximately 0.007" distal of the Entera rounded tip.
Intended Use:
The BridgePoint Medical Entera guidewires are intended to facilitate placement of balloon dilatation catheters or other intravascular devices during percutaneous transluminal coronary angioplasty (PTCA) and percutaneous transluminal angioplasty (PTA). The Entera guidewires are not to be used in cerebral blood vessels.
Comparison to Predicate Devices:
The BridgePoint Entera guidewire is substantially equivalent to the Lake Region PTCA guidewire/Triumph (K970376), the Cordis/Brivant, Ltd. Regatta Steerable Guidewire (K073082), and the Asahi PTCA Guidewire Confianza Pro (K041531). Each of these devices are designed to facilitate placement of balloon dilatation catheters or other intravascular devices during PTCA / PTA procedures.
The BridgePoint Medical Entera guidewire is not just substantially equivalent, but is exactly the same as the Lake Region Steerable Guidewire (K970376) currently marketed by Lake Region Medical under the trade name Triumph™, with two exceptions:
-
The Entera has a narrowed extension on its distal tip that is less than 0.014" in diameter while the Triumph™ has a standard 0.014" distal tip, and,
-
the distal most portion of the Entera core wire (the section that resides under the distal coil) has a round cross section while the Triumph has a flattened or ribbon cross section.
The Entera and Triumph are manufactured by Lake Region Medical. The Triumph and Entera are produced using the same component materials (core wire, coil, coatings, solder etc.) and have very similar physical attributes (flexibility, radiopacity, etc). In terms of the distal tip geometries; the Lake Region Medical distal tip includes a conventional soldered and rounded .014" profile tip, while the Entera guidewire includes a very short portion of core wire that extends past the soldered and rounded distal tip. This extension is approximately 0.0032'' in diameter and 0.007" in length.
BridgePoint Medical 510(k) Submission 800-0003-01 April 26, 2008
2
The BridgePoint Entera guidewire has a distal tip geometry that is substantially equivalent to the narrowed distal tip geometries of the Cordis/Brivant, Ltd. Regatta Steerable Guidewire, and the Asahi PTCA Guidewire Confianza Pro. The Cordis Regatta has a non-conventional narrowed "wedge shaped" tip that tapers to a dimension that is substantially less than 0.014" (exact dimension unknown). The Confianza Pro has a distal tip that gradually tapers to a 0.009" diameter.
The distal tips of each device are radiopaque and can be seen with fluoroscopy for precise placement. Each of these device are highly lubricious for smooth delivery of multiple devices. They all have stainless steel core wires.
Summary:
Based upon the intended use, descriptive information, and performance evaluation provided in this pre-market notification, the BridgePoint Entera device has been shown to be substantially equivalent to currently marketed predicate devices.
3
Image /page/3/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo is circular and contains the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. In the center of the logo is an abstract symbol that resembles a stylized caduceus or a series of interconnected human profiles.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
OCT 0 8 2008
BridgePoint Medical c/o Michael A. Daniel Regulatory/Clinical Affairs Consultant Daniel & Daniel Consulting 8 Snowberry Court Orinda, CA 94563
Re: K081187
Trade/Device Name: Entera™ Percutaneous Coronary and Peripheral Guidewire Regulation Number: 21 CFR 870.1330 Regulation Name: Catheter Guidewire Regulatory Class: Class II Dated: September 26, 2008 Received: September 29, 2008
Dear Mr. Daniel:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality
4
Page 2 - Mr. Michael A. Daniel
systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you dcsire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Center for Devices and Radiological Health's (CDRH's) Office of Compliance at (240) 276-0120. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding postmarket surveillance, please contact CDRH's Office of Surveillance and Biometrics' (OSB's) Division of Postmarket Surveillance at 240-276-3474. For questions regarding the reporting of device adverse events (Medical Device Reporting (MDR)), please contact the Division of Surveillance Systems at 240-276-3464. You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (240) 276-3150 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.
Sincerely yours.
R. varlmer
Bram D. Zuckerman, M.D. Director Division of Cardiovascular Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
5
Indications for Use
510(k) Number: (TBA) 《081187
BridgePoint Medical Entera Device Device Name:
Indications For Use:
The BridgePoint Medical Entera guidewires are intended to facilitate placement of balloon dilatation catheters or other intravascular devices during percutaneous transluminal coronary angioplasty (PCTA) and percutaneous transluminal angioplasty (PTA). The Entera guidewires are not to be used in cerebral blood vessels.
Prescription Use X (Part 21 CFR 801 Subpart D) AND/OR
Over-The-Counter Use (21 CFR 807 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Deling B. bortiner (Division Sign-Off)
Page 1 of 1
Division of Cardiovascular Devices
510(k) Number_Ko81) 87
Bridgepoint Medical 510(k) Submission 800-0003-01
April 26, 2008
19 of 531