(60 days)
The VEGA Medical Suction Equipment, model SU-01/SU-DC01 is a device used to remove fluids from airway or respiratory support system and infectious materials from wounds.
The VEGA Medical Suction Equipment, model SU-01/SU-DC01 is a portable AC powered suction pump. It consists of a pump unit, collection bottle, relief valve, vacuum gage, bacteria filter, and suction tube. The device is designed and manufactured to comply with IEC 60601-1. IEC 60601-1-2, and ISO 10079-1.
The provided text describes the 510(k) premarket notification for the "VEGA Medical Suction Equipment, model SU-01/SU-DC01." However, it does not include information about acceptance criteria or a study that proves the device meets those criteria, as typically understood for AI/algorithm-based devices with performance metrics like sensitivity, specificity, etc.
Instead, this submission is for a medical suction pump, which is a hardware device. The "acceptance criteria" and "study" described are about demonstrating substantial equivalence to a predicate device and compliance with relevant safety and performance standards for such hardware.
Here's a breakdown based on the provided text, addressing your points where applicable for this type of device:
1. A table of acceptance criteria and the reported device performance
The document does not explicitly present a table of acceptance criteria for performance metrics in the typical sense (e.g., sensitivity, specificity, accuracy). Instead, acceptance criteria are inferred from the compliance with international standards and comparison to the predicate device.
| Acceptance Criterion (Inferred) | Reported Device Performance |
|---|---|
| Compliance with ISO 10079-1 (Performance) | Manufacturer-conducted Performance Compliance Test according to ISO 10079-1 |
| Compliance with IEC 60601-1 (Electrical Safety) | Accredited laboratory-conducted Electrical Compliance Test according to IEC 60601-1 |
| Compliance with IEC 60601-1-2 (EMC) | Accredited laboratory-conducted EMC Compliance Test according to IEC 60601-1-2 |
| Substantial equivalence in intended use and technological characteristics to predicate device (DeVilbiss Suction Unit K982304) | The device has the same intended use. Differences in operational specifications, power consumption, outlook, dimensions, weight, and mode of operation "do not affect the intended use or alter the fundamental scientific technology." |
2. Sample size used for the test set and the data provenance (e.g., country of origin of the data, retrospective or prospective)
This information is not applicable in the context of this 510(k) submission for a medical suction pump. The "tests" mentioned are compliance tests against engineering standards, not performance evaluations on a patient "test set" with data in the way AI/software devices are evaluated.
3. Number of experts used to establish the ground truth for the test set and the qualifications of those experts (e.g., radiologist with 10 years of experience)
This information is not applicable. Ground truth, as typically discussed for medical AI/imaging, is not relevant for the compliance testing of a hardware medical suction pump. Compliance is against defined engineering standards.
4. Adjudication method (e.g., 2+1, 3+1, none) for the test set
This information is not applicable. Adjudication methods are used in scenarios where human interpretation or consensus is required to establish ground truth from complex medical data (e.g., images, clinical records). This is not the case for a hardware device's compliance testing.
5. If a multi reader multi case (MRMC) comparative effectiveness study was done, If so, what was the effect size of how much human readers improve with AI vs without AI assistance
This information is not applicable. This type of study investigates the impact of AI on human reader performance, which is not relevant for a standalone medical suction device. The submission explicitly states: "No particular Clinical Test was conducted for VEGA Medical Suction Equipment."
6. If a standalone (i.e. algorithm only without human-in-the-loop performance) was done
This information is not applicable. This device is a physical medical suction equipment, not an algorithm. Therefore, "standalone algorithm performance" is not a relevant concept for this submission.
7. The type of ground truth used (expert consensus, pathology, outcomes data, etc)
This information is not applicable. The "truth" for this device's evaluation is compliance with established engineering and safety standards (ISO 10079-1, IEC 60601-1, IEC 60601-1-2) and demonstration of substantial equivalence to a predicate device based on its design and specifications.
8. The sample size for the training set
This information is not applicable. There is no "training set" as this is a hardware device, not a machine learning model.
9. How the ground truth for the training set was established
This information is not applicable. As there is no training set, there is no ground truth to establish for it.
{0}------------------------------------------------
510(K) SUMMARY
NOV 1 2 2010
This summary of 510(k) safety and effectiveness information is being prepared in accordance with the requirements of SMDA 1990 and 21 CFR 807.92 at October 20, 2010.
The assigned 510(k) number is: K102626 .
- Submitter's Identifications: Establishment: DONGGUAN DALANG VIGOR ELECTRONICS MFY. Yang Wu District, Da Lang Town, Dong Guan City Guang Dong Prov., CHINA Registration Number: 9616843 Operations: Manufacturer
Owner/Operator: VEGA TECHNOLOGIES, INC. 11F-13, 100 Chang-Chun Rd., Taipei CHINA (Taiwan) 104. Owner/Operator Number: 9036509
Contact: Mr. Joseph Lu VEGA TECHNOLOGIES, INC. I1F-13. 100 Chang-Chun Rd. Taipei, CHINA (TAIWAN) 104 Phone: 886-2-2541-6996 Fax: 886-2-2521-3803
-
- Name of the Device: VEGA Medical Suction Equipment, model SU-01/SU-DC01.
-
- Information of the 510(k) Cleared Device (Predicate Device): DeVilbiss Suction Unit (K982304).
4. Device Description:
The VEGA Medical Suction Equipment, model SU-01/SU-DC01 is a portable AC powered suction pump. It consists of a pump unit, collection bottle, relief valve, vacuum gage, bacteria filter, and suction tube. The device is designed and manufactured to comply with IEC 60601-1. IEC 60601-1-2, and ISO 10079-1.
-
- Intended Use:
The VEGA Medical Suction Equipment, model SU-01/SU-DC01 is a device used to remove fluids from airway or respiratory support system and infectious materials from wounds.
- Intended Use:
{1}------------------------------------------------
VEGA TECHNOLOGIES, INC.
-
the operational specification(including vacuum range, flow rate, and collection bottle 1> capacity)
-
2> the operational power consumption.
-
3> the device outlook, dimensions, and weight.
-
mode of operation. 4>
-
7 . Discussion of Non-Clinical Tests Verification Activities Performed to Determine the Safety and_ Performance of SU-01/SU-DC01 are as the followings:
- 1> Performance Compliance Test according to ISO 10079-1 conducted by manufacturer
- 2> Electrical Compliance Test according to IEC 60601-1 by accredited laboratory.
- 3> EMC Compliance Test according to IEC 60601-1-2 by accredited laboratory.
-
- Discussion of Clinical Test Validation Activities Performed to Determine the Effectiveness of Device are as the followings: No particular Clinical Test was conducted for VEGA Medical Suction Equipment.
-
- Conclusions
The VEGA Medical Suction Equipment, model SU-01/SU-DC01, has the same intended use and technological characteristics as the cleared device of DeVilbiss Suction Unit (K982304). Moreover, verification and validation tests contained in this submission demonstrate that the difference in the submitted demonstrate that the difference in the submitted models could maintain the same safety and effectiveness as that of cleared device.
In the other words, those engineering difference do not: (1) affect the intended use or (2) alter the fundamental scientific technology of the device.
{2}------------------------------------------------
Image /page/2/Picture/1 description: The image shows a logo for the Department of Health. The logo features a stylized eagle with three curved lines representing its wings. The text "DEPARTMENT OF HEALTH &" is arranged vertically along the left side of the logo.
Food and Drug Administration 10903 New Hampshire Avenue Document Control Room -WO66-G609 Silver Spring, MD 20993-0002
Vega Technologies, Inc. % Mr. Joseph Lu 11F-13, 100 Chang-Chun Road Taipei, China (Taiwan) 104
NOV 1 2 2010
Re: K102626
Trade/Device Name: VEGA Medical Suction Equipment, Model SU-01/SU-DC01 Regulation Number: 21 CFR 878.4780 Regulation Name: Powered suction pump Regulatory Class: Class II Product Code: JCX Dated: November 02, 2010 Received: November 03, 2010
Dear Mr. Lu:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Or to and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbrandi, and adulteration. Please note: CDRH does not evaluate information related to contract lindility warranties. We remind you; however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device an be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements af the Act or any Federal statutes and regulations administered by other Federal agencies. You must
{3}------------------------------------------------
Page 2 - Mr. Joseph Lu
comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHQffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportalProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm.
Sincerely yours,
F-r Pithy
Mark N. Melkerson Director Division of Surgical, Orthopedic And Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
Indications For Use
510(k) Number (if known): _ K102626
Device Name: VEGA Medical Suction Equipment, model SU-01/SU-DC01.
Indications For Use:
The VEGA Medical Suction Equipment, model SU-01/SU-DC01 is a device used to remove fluids from airway or respiratory support system and infectious materials from wounds.
Prescription Use OR (Part 21 CFR 801 Subpart D)
Over-The-Counter Use (21 CFR 807 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Neil R. Ogle for mxm
Division Sign (3)
Division of Surgical, Orthopedic, and Restorative Devices
Page 1 of 1
510(k) Number K102626
Page 3 of 3
§ 878.4780 Powered suction pump.
(a)
Identification. A powered suction pump is a portable, AC-powered or compressed air-powered device intended to be used to remove infectious materials from wounds or fluids from a patient's airway or respiratory support system. The device may be used during surgery in the operating room or at the patient's bedside. The device may include a microbial filter.(b)
Classification. Class II.