Search Filters

Search Results

Found 1 results

510(k) Data Aggregation

    K Number
    K140358
    Date Cleared
    2014-06-02

    (110 days)

    Product Code
    Regulation Number
    888.3030
    Reference & Predicate Devices
    Why did this record match?
    Reference Devices :

    K122871, K132875

    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    The Compressyn™ Staple is intended for: 1) hand and foot bone fragment and osteotomy fixation and joint arthrodesis, 2) fixation of proximal tibial metaphysis osteotomy, 3) adjunctive fixation of small bone fragments. These fragments may be located in long bones such as the femur, fibula and tibia in the lower extremity; the humerus. ulna or radius in the upper extremities; the clavicle and ribs; and in the flat bones such as the pelvis, scapula and sternum.

    Device Description

    The Compressyn™ Staple is a fully integrated system that consists of a stainless steel staple preloaded on a handheld ABS and polycarbonate mechanical delivery device. The staple is offered in several sizes with barbs to prevent back out. It is a compression staple fixation device that is placed into two tissue segments using pre-drilled holes to provide stabilized fixation. The Compressyn™ Staple is provided sterile in a disposable tray with a drill bit and drill guide.

    AI/ML Overview

    The provided text describes Dallen Medical's Compressyn™ Staple (K140358) and its substantial equivalence to previously cleared devices (K122871, K132875). However, it does not contain any information regarding specific acceptance criteria, a study proving device performance against those criteria, or details about sample sizes, ground truth establishment, or expert involvement.

    The document primarily focuses on the device's description, indications for use, and a declaration of substantial equivalence based on the device being "identical to the predicate and therefore has the same physical and technical characteristics." It mentions some testing of the preloaded mechanical delivery device for "impact force, staple delivery, compressive force and bond strength," but it does not provide any quantitative results or acceptance criteria for these tests.

    Therefore, I cannot fulfill your request for a table of acceptance criteria and reported device performance, nor can I provide information about the study design elements you asked for, as this data is not present in the provided text.

    Ask a Question

    Ask a specific question about this device

    Page 1 of 1