Search Results
Found 2 results
510(k) Data Aggregation
(234 days)
The Compress® Segmental Humeral Replacement System is intended to replace the resected part of the humerus in cases of severe bone loss in either the proximal or distal humerus. The Compress® Segmental Humeral Replacement System components are intended for uncemented use.
The Compress® Segmental Humeral Replacement System is indicated for:
- Correction or revision of unsuccessful osteotomy, arthrodesis, or previous joint replacement.
- Tumor resections.
- Revision of previously failed total joint arthroplasty.
- Trauma.
The Compress® Segmental Humeral Replacement System components are intended for uncemented use.
The Discovery Elbow components when used in conjunction with the Compress® Segmental Humeral Replacement System are restricted to the Compress® Segmental Humeral Replacement System indications and are intended to be inserted with bone cement.
The Modular Hybrid Glenoid when used in conjunction with the Compress® Segmental Humeral Replacement System is restricted to the Compress® Segmental Humeral Replacement System indications and is intended to be used with bone cement. The optional porous titanium peg may be inserted without bone cement. The optional polyethylene peg should be inserted with bone cement.
The Compress® Segmental Humeral Replacement System is a metallic segmental fixation system intended to replace the resected part of the humerus in cases of severe bone loss. The design of the Compress® System allows a compressive load to be applied at the prosthetic implant-bone interface at the time of device insertion. This is accomplished through a spring system built into the stem.
The Compress® Segmental Humeral Replacement System is a set of Compliant - Pre-Stress implants that replace the humeral stems that would normally be used during a proximal or distal humeral replacement surgery.
Here's a summary of the acceptance criteria and the study information based on the provided text, formatted as requested:
1. Table of Acceptance Criteria and Reported Device Performance
Test Name | Acceptance Criterion | Reported Device Performance |
---|---|---|
Mini Compress® Taper Fatigue Test | Cyclic fatigue testing to ten million cycles without failure (implied) | All test specimens passed cyclic fatigue testing to ten million cycles without failure. |
Mini Compress® Pull-off Test | Exceeded minimum acceptance criterion (specific value not given) | Each individual specimen exceeded the minimum acceptance criterion, as did the average pull-off strength. |
2. Sample Size Used for the Test Set and Data Provenance
The provided document describes non-clinical (bench) testing only. It does not mention a "test set" in the context of patient data.
- Sample Size for Test Set: Not applicable, as no clinical test set was used.
- Data Provenance: Not applicable, as no clinical data was used.
3. Number of Experts Used to Establish Ground Truth for the Test Set and Qualifications of Experts
Not applicable. The tests performed are mechanical engineering tests, not clinical evaluations requiring expert consensus on ground truth.
4. Adjudication Method for the Test Set
Not applicable, as no clinical test set with ground truth establishment was performed. The non-clinical tests likely followed standardized engineering practices for evaluation.
5. If a Multi-Reader Multi-Case (MRMC) Comparative Effectiveness Study Was Done, and Effect Size
No. A multi-reader multi-case (MRMC) comparative effectiveness study was not done.
6. If a Standalone Study (Algorithm Only Without Human-in-the-Loop Performance) Was Done
Not applicable. The device is a physical medical implant (Compress® Segmental Humeral Replacement System), not an algorithm or AI system. Therefore, a standalone performance study in the context of AI is not relevant.
7. The Type of Ground Truth Used
The ground truth for the non-clinical tests was based on engineering specifications and predefined performance thresholds for mechanical properties (fatigue life, pull-off strength). This is a form of objective physical measurement against a standard.
8. The Sample Size for the Training Set
Not applicable. The device is a physical medical implant, not an AI or machine learning model that requires a training set.
9. How the Ground Truth for the Training Set Was Established
Not applicable, as there was no training set for an AI/ML model.
Ask a specific question about this device
(51 days)
The indications for use for the Discovery™ – Mosaic™ Total Humerus System include:
-
- Non-inflammatory degenerative joint disease including osteoarthritis and avascular necrosis
-
- Rheumatoid arthritis
-
- Revision where other devices or treatments have failed
-
- Correction of functional deformity
- Treatment of acute or chronic fractures with humeral epicondyle (elbow) involvement or humeral head (shoulder), which are unmanageable using other treatment methods
-
- Oncology applications
The Discovery™ - Mosaic™ Total Humerus System is intended for cemented use only.
- Oncology applications
The Discovery™ - Mosaic™ Total Humerus System includes the components of the Discovery Elbow, the components of the 3 Piece Proximal Humeral Replacement System, and an intercalary segment designed to connect them. The Discovery™ - Mosaic™ Total Humerus System uses the same modular heads and glenoid components that were cleared for use in the predicate 3 Piece Proximal Humeral Replacement System.
The provided 510(k) summary for the Discovery™ - Mosaic™ Total Humerus System does not contain information about acceptance criteria or a study proving the device meets specific performance criteria through testing that would typically be described in an AI/Software as a Medical Device (SaMD) context.
This documentation is for a physical medical device (a shoulder prosthesis), and the submission focuses on demonstrating substantial equivalence to previously marketed predicate devices rather than proving performance against quantitative acceptance criteria through new clinical or technological studies in the way you've laid out questions.
Therefore, many of your specific questions regarding AI/SaMD performance evaluation metrics (e.g., sample sizes for test sets, expert ground truth, adjudication methods, MRMC studies, standalone performance, training set details) are not applicable to this type of device submission.
Here's what can be extracted and what cannot be from the provided text:
Summary of Device Performance and Equivalence
Acceptance Criterion (Typical for SaMD) | Reported Device Performance (as per 510(k)) |
---|---|
Specific quantitative performance metrics (e.g., sensitivity, specificity, AUC for AI/SaMD) | Not applicable. No such criteria or metrics are presented. The device is a physical prosthesis. |
Substantial Equivalence | The device is substantially equivalent to the predicate devices (Discovery™ Elbow - Mosaic™ Distal Humeral Replacement System: K033280 and 3 Piece Proximal Humeral Replacement System: K020045) for the stated indications for use. |
Material Equivalence | The components of the Discovery™ - Mosaic™ Total Humerus System are made from the same materials as the predicate devices. |
Intended Use Equivalence | The device has the same intended use as the predicate devices. |
Safety and Effectiveness | Implied through substantial equivalence to legally marketed devices. |
Device Study Details (As applicable to this physical device)
-
Sample size used for the test set and the data provenance:
- Not applicable. This submission did not involve a "test set" in the context of evaluating an algorithm or AI model. Performance was based on non-clinical testing (mechanical properties) and comparison to predicate devices, not data analysis of a test set.
-
Number of experts used to establish the ground truth for the test set and the qualifications of those experts:
- Not applicable. No test set or expert-established ground truth as typically understood for AI/SaMD.
-
Adjudication method for the test set:
- Not applicable.
-
If a multi reader multi case (MRMC) comparative effectiveness study was done, If so, what was the effect size of how much human readers improve with AI vs without AI assistance:
- Not applicable. This relates to human-AI collaboration in diagnostics/interpretation, not a physical implant.
-
If a standalone (i.e. algorithm only without human-in-the-loop performance) was done:
- Not applicable. This is a physical device, not an algorithm.
-
The type of ground truth used:
- For the non-clinical testing, the "ground truth" would be the engineering specifications and mechanical test results that demonstrate the device meets performance standards (e.g., strength, durability) comparable to the predicate devices. This is not explicitly detailed in the summary, but it's the basis for "Non-Clinical Testing" claim ("performance data indicated that the Discovery™ - Mosaic™ Total Humerus System is I ric performally equivalent to the predicate devices for the uses indicated.")
-
The sample size for the training set:
- Not applicable. No training set was used for an AI/ML model for this physical device.
-
How the ground truth for the training set was established:
- Not applicable.
Key Takeaways from the Provided Text:
- Device Type: Physical shoulder prosthesis, not a software or AI device.
- Regulatory Pathway: 510(k) Premarket Notification, relying on substantial equivalence to predicate devices.
- Performance Demonstration:
- Non-Clinical Testing: Was performed, and indicated "performally equivalent" to predicate devices. Specifics of this testing (e.g., types of tests, specific results, acceptance criteria for these tests) are not provided in this summary.
- Clinical Testing: "was not required for these components to support substantial equivalence." This is common for devices following the 510(k) pathway when substantial equivalence can be demonstrated through non-clinical means and similarity to well-established predicates.
- Indications for Use: Clearly stated, covering degenerative joint disease, rheumatoid arthritis, revisions, deformity correction, fractures, and oncology applications, for cemented use only.
Ask a specific question about this device
Page 1 of 1