Search Results

The Bella Elevator, LLC vertical Platform lift models RL, UL, SL, EL, EPL are designed to transport persons with a mobility disability either in a wheelchair or ambulatory, up and down between levels of a residential or public facility.

The Bella Elevator, LLC vertical platform lift models RL, UL, SL, EPL are designed to transport persons with a mobility disability, either in a wheelchair or ambulatory, up and down between levels of a residential or public facility. The model EL and EPL are located within with their own integrated enclosure. The model SL is located within a hoistway. The UL model is unenclosed, other than guarding around the platform area. The RL model is unenclosed and intended for applications found in a residence. These models are designed for both indoor and outdoor applications. Each referenced model has a capacity of 750 lbs to accommodate a person in a wheelchair and an attendant. The lifts are available with a chain hydraulic drive system or an acme screw drive system. Backup systems are available for emergency operation and evacuation. All controls are low voltage, constant pressure. Use may be restricted to authorized persons with key switch located on control panels.

The intended use of the LIFTKAR PT™ is to transport a wheelchair user or a person needing assistance up or down stairs by means of a battery powered, mobile lifting device. LIFTKAR PT is operated by an attendant and is used in residential and public facilities indoors and outside. The LIFTKAR PT™ Is a wheelchair, elevator commonly known as an easy method of transporting wheelchair users of uisabled persons, ap and as a mobile stair-climber. This is done with alitting - LIFT AD PT. LIFTKAR PT™ can be used on any stairs indoors or outside.

The LIFTKAR PT™ ADAPT is an attendant operated, battery powered lifting device that transports manual wheelchairs up or down stairs. The LIFTKAR PT is designed for indoor and outdoor use allowing mobility for the person needing assistance. A portable stair-climber LIFTKAR PT can be dismantled into three parts, the climber unit, the battery pack and the handle. All parts are lightweight and easy to stow away.

The Inclined Platform Lifts "JOURNEY" and "SUPRA" are intended to mechanically transport one person in a wheelchair or in a fold-down seat up and down stairs in a private or public facility.

The Thyssenkrupp Ceteco's JOURNEY and SUPRA are unenclosed Inclined Platform Lifts (IPLs) designed to carry a wheelchair and its occupant or a mobility-impaired person seated on a folding seat between floors in a public or private facility. They are composed of two main parts the rail and the carriage. The rail is the part where the carriage is attached to and where it will move along. The carriage is the part where the person to be transported is positioned on.

The intended use of the Harmar Summit RPL/CPL Vertical Platform Lifts is to transport persons with a mobility disability, either in a wheelchair or ambulatory, up and down between levels of a residential or public facility.

The Harmar Summit, LLC Models RPL and CPL Vertical Platform Lifts are AC powered, patient transport devices designed for use in both residential and commercial applications. Their intended function and use is to transport persons with a mobility disability, either in a wheelchair or ambulatory, up and down between levels of a residential or public facility. The RPL lift is designed for residential applications and will support a maximum load of 600 lbs. The CPL lift is designed for commercial or public applications, and will support a maximum load of 750 lbs.

The Inclined Platform-Lift "JOURNEY" is intended to mechanically transport one person in a wheelchair or in a fold-down seat up and down stairs in a private or public facility either in indoors or outdoors.

The JOURNEY consists of a motorized main-frame with a platform, moving on a public of The JOURNET Consists of a motorized man interest man and on the discussion fixed floors in a public of piritor of a fack placed at the bottom of the blood garror, it The JOURNEY is designed to carry a private dwelling; it is an unenclosed Inclined Platformlift. The JOURNEY of wheelchair and its occupant or a person with impaired mobility seated on a folding seat. There are currently two different models designed to address different kind of staircase. - The JOURNEY (technically called RPSP) designed strictly for straight stairways. ■ - The JOURNEY (technically called TP or ) docigned for straight and turning stairways. Starways. Each of the two models is accessible via four types of platform (special size are available under Each of the two models is accessible via four types of plations (promps are raided automatically (manually in emergency cases). (fridaliy in emergency casos). The JOURNEY, as rail, uses one guide, dimensions roughly 400 mm x 65 mm, the guide is made in extruded aluminium profile (TK Ceteco drawing) and anodised. The JOURNEY CUBIC, as rail, uses two parallel guides, custom-bended according to the stainway. The JOURNEY CUBIC, as rail, uses two parallel guides, custom-bended according T The JOUNCT GODIO, as Tail, acco two paralier garabel on extruded aluminium profile (TK Ceteco drawing) and powder coated painted. The guide follows the average of staircase and is supported by specific stanchions, anchors on the steps and/or to the wall. steps and/or to the wall. The JOURNEY is equipped with an "Over-speed Governor and Safety Gear" that it is directly and THE JOURNET is equipped with an "Over operated directly by a speed limiter device with mechanically liked on the 'system of the traction system, the insettion system, the insertion of the mput menta due to the merceased specu, in caso of failers of the armanical arrest" of the platform lift. the JOURNEY is equipped with "Hold to run Buttons" and with an emergency stop button. The JOURNEY is also provided the following safety devices: - onNice is also provided the following eactly in motion towards' high on both the body and the platform; 포 - anti-scissor system in motion down under the bottom of the platform and on the bottom of the . bodv: - body, I

The Merits E700 Porch Lift System is a wheelchair elevator, also commonly known as a vertical platform lift. It is a motorized device intended to mechanically transport an individual with mobility disability, either in a wheelchair device or ambulatory, from one level to another in a private residence.

The Merits E700 Porch Lift basically consists of a platform assembly and a driving machine case assembly. The platform assembly vertically moves along a guide rail welded to the driving machine case assembly. The sides of the platform assembly are guarded by sheet steel plates. The lower landing side of the platform is equipped with an automatic folding ramp to not only offer easy access to the platform but also to prevent the mobility device rolling off the edges. The ramp will be automatically folded up as the lift begins to move upward and remain in elevated position until the platform returns to the lower landing. The underside of the platform is equipped with a safety plate to stop the motion when the platform is obstructed in the downward direction. The driving machine case assembly contains all necessary operation systems in the case. The operation of the lift is controlled by the platform operating panel and the call/send controls. These control devices are designed by means of continuous pressure type, which stop the lift immediately when the switch is released. The Merits E700 Porch Lift is using AC power as its power source.

The VPL-3100 is intended to mechanically transport an individual with a mobility disability, either in a wheelchair device or ambulatory, from one level to another in a private residence.

Not Found

The Genesis Vertical Platform Lift is intended to mechanically transport persons with a mobility disability, either in a wheelchair or ambulatory, up and down between levels of a residential or public facility.

The Genesis Vertical Platform Lift is designed to transport persons with a mobility disability, either in a wheelchair or ambulatory, up and down between levels of a residential or public facility. It can be located within with its own integrated shaftway enclosure, located within a building shaftway or be unenclosed other than guarding around the platform area. It is designed for both indoor and outdoor locations. The Genesis has a capacity of 750 lbs to accommodate a person in a wheelchair and an attendant. The lifting height is up to 14 feet. It is available with a chain hydraulic drive system or an acme screw drive system. Backup systems are available for emergency operation and evacuation. All controls are low-voltage constant pressure. Use may be restricted to authorized persons with key switches located on the control panels. The Genesis is built in accordance with ASME A17.5 Electrical Code for Elevating Devices and the ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts.

The Multilift Vertical Platform Lift is intended to mechanically transport an individual in a wheelchair directly between floors in a private residence.

The Multilift is similar to other products in commercial distribution. These products, like the Multilift, utilize electrically driven, wall-mounted on self-standing platform units to enable individuals in wheelchairs to travel up and down between floors in a residential or public setting.

The Super-Trac TRE-52 is intended to mechanically transport a single individual in a wheelchair up and down stairs in a private or public facility. The Super-Trac must be operated by a trained attendant.

The Super-Trac TRE-52 is a portable wheelchair lift designed to carry a passenger in a wheelchair up and down stairs. It is a mobile, attendant-operated device that will accommodate most child and adult wheelchairs, including power wheelchairs and sports wheelchairs. The Super-Trac TRE-52 consists of two endless durable belt tracks driven by two 12 volt DC motors. Two 12 volt 24 AH rechargeable batteries are used to power the motors. The device includes a set of auxiliary wheels that assist in maneuverability on landings. The wheelchair fits onto a platform that is mounted to the drive frame. Loading is by means of an integrated ramp that slides out from below the platform. The wheelchair is secured to the platform using four tie-down straps and a seatbelt that goes around both the passenger and wheelchair. The platform is tilted to the stair-travel position by a hydraulic actuator located on the drive frame. Super-Trac is equipped with a key switch to restrict use to authorized persons. A stair-slope indicator is provided to determine the stair angle is within the operating range. The attendant operates Super-Trac TRE-52 from controls located on the operating handle. Super-Trac TRE-52 is designed for use on both indoor and outdoor stairways.