Search Results
Found 4 results
510(k) Data Aggregation
K Number
K243477Device Name
Universal Tendon Spacer
Manufacturer
Askorn Medical
Date Cleared
2025-01-10
(63 days)
Product Code
HXA
Regulation Number
888.3025Why did this record match?
Product Code :
HXA
AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP Authorized
Intended Use
Universal Tendon Spacer is a medical device used in the reconstruction of the flexor and extensor tendons of the hand. The device is implantable for 2 to 6 months and intended for single use.
This device is used for:
Adherent or mutilated tendons following trauma or a primary repair which has failed. Absence of the tendon sheath. Non-functioning, mutilated or adherent tendon pulleys. Ruptured tendons. The patient must be in good health with sufficient tissue cover. Sufficiently healthy joints, bone marrow and adequate vascular and neuro-muscular conditions are also necessary to facilitate a definite functional improvement using this reconstruction technique. The patient must be cooperative, especially concerning the need for rehabilitation measures.
Device Description
Universal Tendon Spacer (UTS) is a medical device made of silicone for temporary implantation (two to six months) for use in the twostage reconstruction of the flexor and extensor tendons of the hand. When implanted, UTS is in contact with the tissues and bones of the fingers for a long-term contact duration (>30 days).
This medical device contributes to the rehabilitation of the digital canal by creating a neo-sheath which should be as large as possible depending on the patient's anatomy. It is the body with the silicone which makes it possible to obtain the synovial neosheath which will receive, during the second operative time, a tendon of the formation of this neo-sheath the tendon will be able to slide again in the sheath and will make the finger of the patient work.
The Universal Tendon Spacer is a single size ovoid-shaped rod whose over its entire length. The rule is for the larger diameter to always be twice that of the smaller diameter.
The principle is the same as those of rival man difference being that the four different sizes generally provided are all available on one single rod. The UTS is made of long-term nigh performance implantable silicone to which barium sulfate has been added to make the rod radio-opaque for X-ray examination. Raw materials of Universal Tendon Spacer meet USP Class VI test requirements.
Only one reference exists for this device, and it is not intended to be assembled with any other device.
The intended patient population is adults and children. The device is for single use only and is provided sterile.
Ask a Question
K Number
K000019Device Name
SINGLE SIZE TENDON SPACER
Manufacturer
MEDIST INTERNATIONAL
Date Cleared
2000-03-29
(85 days)
Product Code
HXA
Regulation Number
888.3025Why did this record match?
Product Code :
HXA
AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP Authorized
Intended Use
Surgical indications for the Single Size Tendon Spacers include: Scarred or adhering tendons due to trauma or failed primary repair. Absence of tendon sheath. Scarred or adherent non-functional tendon pulleys. Ruptured tendon. The device is single use, temporary implantation for 2 to 6 months.
Device Description
The Single Size Tendon Spacer is designed to facilitate the two-step tendon reconstruction surgery. The device is 50 cm long, and its oval cross section increases progressively over its length from 3.0 x 1.5 mm to 3.0 mm. The spacer slope is designed to match shapes and dimensions of the digital canal. The spacers are made of high performance medical grade silicone elastomer containing barium suffate to provide radio-opacity. During the first stage of the reconstruction surger is placed into the reconstructed tendon bed and slid until optimum fit is achieved. The tendon is attached to the distal phalanx and the proximal spacer end is left free in the palm or forelimb. Excess spacer material is cut off. The second stage of surgery is performed 2 to 6 months later, once an appropriate pseudo-sheath has been created around the spacer, and tissues are soft and pliable. The spacer is then removed and replaced by a permanent active tendon autograft. The device is not intended as permanent implant or to function as a replacement for a ligament or tendon.
Ask a Question
K Number
K973385Device Name
OVAL SHAPES
Manufacturer
TECHNICAL PRODUCTS, INC.
Date Cleared
1997-12-05
(88 days)
Product Code
HXA
Regulation Number
888.3025Why did this record match?
Product Code :
HXA
AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP Authorized
Intended Use
The purchaser shall sufficiently inform themselves regarding the use of silicone materials in any surgical procedure to insure its proper use. Sil-Tec Medical Grade Oval Shape is a soft, radiopaque silicon elastomer shape intended for reconstruction and surgical repair procedures. Some uses have been: As temporary stents for the formation of new tendon sheaths. Other surgical repair procedures demanding a highly inert and flexible oval shaped material.
Device Description
Sil-Tec Medical Grade Oval Shape is a soft, radiopaque silicon elastomer shape intended for reconstruction and surgical repair procedures.
Ask a Question
K Number
K964359Device Name
AVANTA ORTHOPAEDICS TENDON SPACER
Manufacturer
AVANTA ORTHOPAEDICS, INC.
Date Cleared
1997-03-25
(144 days)
Product Code
HXA
Regulation Number
888.3025Why did this record match?
Product Code :
HXA
AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP Authorized
Intended Use
Surgical indications for the Avanta Orthopaedics Tendon Spacer include: Reconstruction of the flexor or extensor tendons of the fingers, thumb and wrist. Scared or adherent tendons following trauma or failed primary repair. Absence of tendon sheath. Scarred or adherent non-functional tendon pulleys. Ruptured tendon. The device is a single-use, temporary implantation for 2-6 months.
Device Description
The Avanta Orthopaedics Tendon Spacer is a device intended to be implanted made of silicone elastomer which is reinforced with dacron polyester mesh and suture. The device is intended to be used in the surgical reconstruction of a flexor or extensor tendon of the hand. The device may be implanted long enough to permit maturation of the tendon bed to the point at which it can nourish and lubricate the gliding tendon graft. The device may be implanted for a period of time from 2 to 6 months to aid growth of a new tendon sheath. The device is not intended as a permanent implant nor to function as a replacement for the ligament or tendon or to function as a scaffold for soft tissue ingrowth.
The tendon spacer will be available in four sizes, 3,4,5 and 6 mm diameter and 24 cm in length:
Ask a Question
Page 1 of 1