Search Filters

Search Results

Found 1 results

510(k) Data Aggregation

    K Number
    K141304
    Date Cleared
    2014-12-12

    (207 days)

    Product Code
    Regulation Number
    880.6250
    Reference & Predicate Devices
    Predicate For
    N/A
    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    Nitrile Powder Free Patient Examination Gloves, Blue color is a non-sterile disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner.

    Device Description

    Nitrile films form a barrier to body fluids and bloodborne Pathogens. The nitrile rubber is water tight under normal conditions of use. It's tensile properties cause it to conform to the hand, allowing movements necessary for a medical procedure. Nitrile glove is known to create a barrier to bloodborne pathogens and body fluids. ASTM conforming tensile properties create a glove that is strong and flexible. The glove is manufactured in accordance with the requirements of ASTM D6319 and ASTM D5151 requirements.

    AI/ML Overview

    The provided document is a 510(k) summary for Nitrile Powder Free Patient Examination Gloves, Blue Color. This document describes the device's characteristics and its comparison to a predicate device to establish substantial equivalence, not a study performing extensive clinical trials typically associated with AI/ML devices. Therefore, many of the requested criteria regarding AI device performance are not applicable to this submission.

    Here's an analysis of the provided information relative to your questions:


    1. Table of Acceptance Criteria and Reported Device Performance

    The acceptance criteria are generally based on meeting established ASTM and CFR standards.

    CharacteristicStandard/Acceptance CriteriaDevice Performance
    DimensionASTM D 6319-10Meets
    Physical PropertiesASTM D 6319-10 (Before/After aging: Elongation $\ge$ 500%, Tensile Strength $\ge$ 14MPa)Meets (Elongation: 520-580%, Tensile Strength: 22-34 MPa)
    Freedom from pinholes21 CFR 800.20, ASTM D 5151-06 (Reapproved 2011), AQL 2.5 (Inspection Level I)Meets
    Powder ResidualASTM D 6319-10, ASTM D 6124-06 (Reapproved 2011)Meets (
    Ask a Question

    Ask a specific question about this device

    Page 1 of 1