Search Results

The Micro Medical Solutions PTA Balloon Catheter is intended for percutaneous transluminal angioplasty (PTA) of lesions in peripheral arteries including anterior tibial, posterior tibial, and pedal. Not for use in coronary arteries.

The Micro Medical Solutions PTA Balloon Catheter is a single lumen catheter with a balloon located at the distal tip. As the MMS PTA Balloon Catheter is not an Over-The-Wire device. The catheter consists of a single lumen for balloon inflation and deflation.. Inscribed on the proximal strain relief of the catheter is the balloon diameter (mm) and balloon length (mm). Platinum/Iridium marker bands are positioned on the shaft within the balloon to enable visualization of the catheter/balloon under fluoroscopy.

The provided text describes a 510(k) summary for the MMS PTA Balloon Catheter, focusing on its substantial equivalence to a predicate device. This document primarily details non-clinical performance testing for a medical device and does not include information about AI/ML algorithm performance studies or clinical studies with human readers. Therefore, I cannot provide details on questions related to AI-specific criteria, human reader performance, or multi-reader multi-case studies.

Here's an analysis of the available information:

1. Table of Acceptance Criteria and Reported Device Performance

The document states, "Product testing was completed and met all of the acceptance criteria." However, it does not explicitly list the acceptance criteria for each test or detail the specific results. It only lists the tests performed.

2. Sample Size Used for the Test Set and Data Provenance

• Non-Clinical Testing: The document does not specify the sample size for the mechanical, physical, or chemical non-clinical tests (e.g., how many catheters were tested for burst pressure). It mentions testing was done on "sterile final product" and "baseline (non-aged) and aged products," but no specific numbers are given.
• Animal Testing: The document mentions "Animal testing was conducted to assess the simulated clinical performance" but does not specify the number of animals or the type of animal used.
• Cadaver Experience: "Cadaver testing was conducted using the vasculature below the knee" but does not specify the number of cadavers.
• Data Provenance: The studies are non-clinical (bench testing, animal, cadaver). The country of origin for this data is not specified but is presumed to be internal testing by Micro Medical Solutions, Inc., a US-based company. These are retrospective tests performed to support premarket notification.

3. Number of Experts Used to Establish Ground Truth for the Test Set and Qualifications

This information is not applicable. The device is a physical medical device (balloon catheter), and the "ground truth" for its performance is established through objective, non-clinical tests (mechanical, physical, chemical, biocompatibility, animal studies, cadaver studies), not through expert interpretation of data like images or clinical outcomes that would require human experts to establish ground truth.

4. Adjudication Method for the Test Set

This is not applicable as the studies described are non-clinical performance evaluations of a physical device, not an AI/ML diagnostic algorithm that requires expert adjudication of results.

5. If a Multi-Reader Multi-Case (MRMC) Comparative Effectiveness Study was done, If so, what was the effect size of how much human readers improve with AI vs without AI assistance

No such study was conducted or reported in this 510(k) summary. This document pertains to a physical medical device (balloon catheter), not an AI/ML diagnostic or assistive device.

6. If a Standalone (i.e., algorithm only without human-in-the-loop performance) was done

No standalone algorithm performance study was done. This document is for a physical medical device.

7. The Type of Ground Truth Used

The "ground truth" for the device's performance is established through:

• Objective Material and Mechanical Standards: Such as those defined by ISO 10993 for biocompatibility, and internal specifications for physical properties like burst pressure, dimensions, flexibility, etc.
• Animal Models: For simulated clinical performance.
• Cadaver Models: For simulated clinical use in specific anatomical contexts (below the knee vasculature).

8. The Sample Size for the Training Set

This is not applicable to a physical medical device. There is no AI/ML algorithm involved that requires a training set.

9. How the Ground Truth for the Training Set Was Established

This is not applicable to a physical medical device. There is no AI/ML algorithm involved that requires a training set.

Ask a specific question about this device