Search Results

The BLUEDIAMOND IMPLANT is intended to be surgically placed in the maxillary or mandibular molar areas for the purpose providing prosthetic support for dental restorations (Crown, bridges, and overdentures) in partially or fully edentulous individuals. It is used to restore a patient's chewing function in the following situations and with the clinical protocols:

• Delaved loading
• Immediate loading when good primary stability is achieved and with appropriate occlusal loading.
  For the BLUEDIAMOND IMPLANTS with a Thread Length of 5mm,
  It is indicated for fixed or removable reconstruction in situations of moderate to severely atrophic jawbone and with adequate bone quality that allows primary stability after implant insertion, where a longer implant cannot be placed due to limited vertical bone height. The recommended healing time before loading is between 10 to 12 weeks.
  It is specifically recommended for:
• Fixed partial dentures/splinted units (one implant per unit)
• Pontic cases in combination with at least one longer implant
• Fully edentulous cases with at least one 5 mm Short Implant in combination with 2 longer implants in the anterior region and at least four total implants

The BLUEDIAMOND IMPLANT is a dental implant body system made of CP Ti Grade 4 with the surface treated by SLA method. It is intended to be placed in the maxillary or mandibular areas to restore masticatory function.
It has different thread lengths depending on the diameter and length. The Implanted length of the device is the length that is implanted into the bone, including the length from the thread to the shoulder, which is the non-threaded part.
The Gingival (Cuff) area of the device has grooves; the bottom of the grooves indicate the implantable length.
The BLUEDIAMOND IMPLANT is consisted of the following components.
BLUEDIAMOND IMPLANT Cuff Type: The BLUEDIAMOND IMPLANT is a dental implant body system made of CP Ti Grade 4 with the surface treated by SLA method. It is intended to be placed in the maxillary or mandibular areas to restore masticatory function.
Material: CP Ti Grade 4 of ASTM F67
Dimension (mm):

• Normal Thread Ø 4.0 x 9.0, 11.0, 13.0, 15.0 (7.0, 9.0); Ø 4.4 x 7.0, 9.0, 11.0, 13.0, 15.0 (5.0, 7.0, 9.0); Ø 4.7 x 7.0, 9.0, 11.0, 13.0, 15.0 (5.0, 7.0, 9.0)
• Deep Thread Ø 4.4 x 9.0, 11.0, 13.0, 15.0 (5.0, 7.0, 9.0); Ø 4.8 x 7.0, 9.0, 11.0, 13.0, 15.0 (5.0, 7.0, 9.0); Ø 5.1 x 7.0, 9.0, 11.0, 13.0, 15.0 (5.0, 7.0, 9.0)
  Diameter X Total Length (Thread Length):
• Normal Thread Ø 4.0: 8.0, 9.0, 10.0, 11.0 (1.0, 2.0); Ø 4.4: 7.0, 8.0, 9.0, 10.0, 11.0 (1.0, 2.0); Ø 4.7: 7.0, 8.0, 9.0, 10.0, 11.0 (1.0, 2.0)
• Deep Thread Ø 4.4: 8.0, 9.0, 10.0, 11.0 (1.0, 2.0); Ø 4.8: 7.0, 8.0, 9.0, 10.0, 11.0 (1.0, 2.0); Ø 5.1: 7.0, 8.0, 9.0, 10.0, 11.0 (1.0, 2.0)
  Implanted Length (Thread to Shoulder Height): 2.0, 3.0, 4.0
  Gingival (Cuff) Height: Not Found

The BLUEDIAMOND IMPLANTs are compatible to abutments of The BLUEDIAMOND IMPLANT System from K182448, K192614, K210161, K203808, K233450.

The provided text is an FDA 510(k) summary for a dental implant device (BLUEDIAMOND IMPLANT). It focuses on demonstrating substantial equivalence to predicate devices, rather than an AI/ML medical device. Therefore, it does NOT contain the specific information required to answer your prompt, such as:

• Acceptance Criteria for AI/ML Performance: The document does not describe performance metrics like sensitivity, specificity, AUC, or other measures typically used for AI/ML models. Instead, it focuses on physical and material properties, and mechanical performance (fatigue, pull-out).
• Study Proving Device Meets Acceptance Criteria for AI/ML: No AI model training, validation, or testing is described. The "performance test" section refers to fatigue tests and pull-out tests, which are engineering tests for the physical implant, not for an AI algorithm.
• Sample Sizes for Test Set (AI/ML): Not applicable, as there's no AI/ML test set.
• Data Provenance (AI/ML): Not applicable.
• Number of Experts/Qualifications (AI/ML Ground Truth): Not applicable.
• Adjudication Method (AI/ML Ground Truth): Not applicable.
• MRMC Study (AI/ML): Not applicable.
• Standalone Performance (AI/ML): Not applicable.
• Type of Ground Truth (AI/ML): Not applicable.
• Sample Size for Training Set (AI/ML): Not applicable.
• How Ground Truth for Training Set was Established (AI/ML): Not applicable.

The document primarily discusses:

• Device Description: Material (CP Ti Grade 4), surface treatment (S.L.A), dimensions, components.
• Indications for Use: Placement in maxillary/mandibular molar areas for prosthetic support, delayed and immediate loading protocols, specific recommendations for 5mm thread length implants.
• Substantial Equivalence: Comparison of the BLUEDIAMOND IMPLANT to a primary predicate device (ARi ExCon Implant System) and several reference devices based on design, dimensions, material, surface treatment, sterilization, shelf life, and features.
• Non-Clinical Testing: Biocompatibility, pyrogen/endotoxin testing, sterilization validation, shelf life, modified surface treatment evaluation, and performance test (fatigue test in accordance with ISO 14801, and pull-out testing), and MR compatibility.

In summary, the provided text describes a physical dental implant device and its regulatory submission to the FDA, not an AI/ML-driven medical device. Therefore, it does not contain the information requested about AI acceptance criteria, performance studies, or ground truth establishment.

Ask a specific question about this device

The BLUEDIAMOND IMPLANT System is intended to be surgically placed in the maxillary or mandibular molar areas for the purpose of providing prosthetic support for dental restorations (Crown, bridges, and overdentures) in partially or fully edentulous individuals. These implants can be used where smaller implants have failed.

The BLUEDIAMOND IMPLANT is a substructure of a dental implant system made of CP Ti Grade 4 with the surface treated by SLA method. It is intended to be surgically placed in the maxillary or mandibular molar areas. The fixture offers two types: Normal Thread Type and Deep Thread Type. As the name indicates the Deep Thread Type has slightly deeper threads than the Normal Thread Type.

The Abutment Screw is used for securing the abutment to the endosseous implant. It is made of Ti-6AL-4V ELI.

I am sorry, but the provided text is a 510(k) Premarket Notification from the FDA for a dental implant system. This document is a regulatory submission for a medical device and does not contain information about studies proving that a device meets specific acceptance criteria in the context of an AI/ML-enabled medical device.

The document describes:

• The device (BLUEDIAMOND IMPLANT and Abutment Screw)
• Its intended use (dental restorations)
• Comparison with predicate devices for substantial equivalence (materials, design, sterilization, etc.)
• Non-clinical testing performed (biocompatibility, surface treatment, pyrogen/endotoxin, sterilization, shelf life, performance tests based on ISO standards)
• A statement that no clinical studies were submitted.

Therefore, I cannot extract the following information from the provided text:

1. A table of acceptance criteria and the reported device performance (in the context of an AI/ML device): The document reports performance testing to ISO standards for dental implants (e.g., fatigue testing for mechanical properties) but does not provide acceptance criteria and reported performance in the manner requested for an AI/ML device (e.g., sensitivity, specificity thresholds).
2. Sample size used for the test set and data provenance: Not applicable as no AI/ML study is reported.
3. Number of experts used to establish the ground truth for the test set and their qualifications: Not applicable.
4. Adjudication method for the test set: Not applicable.
5. Multi-reader multi-case (MRMC) comparative effectiveness study information: Not applicable.
6. Standalone (algorithm-only) performance: Not applicable.
7. Type of ground truth used: Not applicable in the context of AI/ML. The device's "ground truth" for regulatory purposes relies on engineering and material standards.
8. Sample size for the training set: Not applicable.
9. How the ground truth for the training set was established: Not applicable.

The document discusses non-clinical performance tests for mechanical properties (e.g., fatigue test according to "ISO 14801" and "Class II Special Controls Guidance Document: Root-form Endosseous Dental Implant Abutment") to demonstrate substantial equivalence to predicate devices, but this is distinct from the type of performance data requested for an AI/ML-driven device.

Ask a specific question about this device