Search Results

Hardware: The BLUEPRINT™ Glenoid Guides are patient-specific drill guides. They have been specially designed to assist in the intraoperative positioning of glenoid components used with total anatomic or reversed shoulder arthroplasty procedures using anatomic landmarks that are identifiable on patient-specific preoperative CT scans. Software: Blueprint® is a medical device for surgeons. Blueprint® is intended to be used as a pre-surgical planner for shoulder replacement surgery. Blueprint® requires CT scan images showing the anatomical shoulder structure in a DICOM format. Blueprint® allows surgeons to visualize, measure, reconstruct, and annotate anatomic data. Blueprint® allows surgeons to design patient specific instruments and Tornier Perform patient-matched primary reversed glenoid*) based on the pre-surgical plan. Blueprint® leads to the generation of a planning report. Blueprint® is to be used for adult men and women patients only whose bone maturity is reached and should not be used for diagnostic purpose.

BLUEPRINT™ Patient Specific Instrumentation is composed of two components: BLUEPRINT™ Glenoid Guides (hardware) and Blueprint® (software). Hardware: The BLUEPRINT ™ Glenoid Guides are patient-specific instruments specially designed to facilitate the implantation of glenoid prostheses. The BLUEPRINT™ Glenoid Guides are designed and manufactured based on a pre-operative plan generated only by the software Blueprint®. Software: Blueprint® is a software connected to an Online Management System (OMS). The user interface software is installed on a computer is intended to be used by orthopedic surgeons, as a preoperative planning software for shoulder arthroplasty surgery (anatomic and reversed). It is intended to help to plan an operation by allowing surgeons to: Plan for shoulder arthroplasty cases, Position and select glenoid and humeral implants, Simulate the prosthetic range of motion, Interact with implants and different computed measurements, Generate information required to design a patient-specific glenoid components when appropriate.

Blueprint® Mixed Reality system is indicated for use during Total Shoulder Arthroplasty using Stryker's FDA cleared implants that are also implants cleared for pre-operative planning with the Blueprint® Software. Blueprint® Mixed Reality system is intended to allow surgeons to visualize the Blueprint® 3D preoperative planning intra-operatively. Blueprint® Mixed Reality system is also indicated for stereotaxic surgery to guide the placement of a glenoid pin provided that registration between the patient's anatomical landmarks / surfaces can be established on the preoperative CT based plan. Blueprint® Mixed Reality system is to be only used for skeletally matured adult patients.

The Blueprint® Mixed Reality system is used to intraoperatively display stereoscopic threedimensional images of the Blueprint shoulder arthroplasty preoperative plan and to guide and enable the insertion of a pin following the reaming axis aimed at preparing the glenoid fossa surface to facilitate the placement of the implant. The Blueprint Mixed Reality system allows the user to both see the patient in real-time and their internal boney anatomy displayed on seethrough screens of a head-mounted device (goggles). The Blueprint Mixed Reality system assists surgeons in visualizing stereoscopic threedimensional images of the patient's boney anatomy and intraoperatively aid by guiding the pin during placement through real-time feedback. The Blueprint Mixed Reality system is composed of three main components including the HOLOBLUEPRINT software, Microsoft® HoloLens 2 Goggles, and Instrumentation. The Blueprint Mixed Reality system runs the HOLOBLUEPRINT software application on the Microsoft HoloLens 2 using Microsoft Windows Holographic Operating System. The Blueprint Mixed Reality system leverages the reference device by receiving planned glenoid cases as input for visualizing and guiding the placement of the pin during the shoulder arthroplasty procedure. The digital components of the system interface with specialized surgical instrumentation to enable intra-operative guidance through real-time feedback to the surgeon. The components of the subject device are as follows: HOLOBLUEPRINT™ Software HOLOBLUEPRINT is designed and written by Tornier SAS specifically for use on the Microsoft HoloLens 2 goggles (hardware). The HOLOBLUEPRINT software is to be installed on the hardware to be used by the surgeon as part of the Blueprint Mixed Reality system. HoloLens 2 goggles (HoloLens 2) The HoloLens 2 is a Microsoft hardware that runs Microsoft Windows 10 Holographic Operating System. HoloLens 2 is a see-through, mixed reality headmounted smart glasses. Instrumentations (Instruments) There are four reusable instruments and one single-use (sterile) instrument designed specifically for use with the Blueprint Mixed Reality system (subject device). The subject device system instruments include a Glenoid Pin Guide, Glenoid Digitizer, Instruments Check Block, Coracoid Clamp, and a Depth Stop Pin (Sterile). The subject device is compatible with all Tornier (Stryker) commercially FDA-cleared glenoid implants (Except Patient Matched Implants) available in the reference device (K211359). The compatibility of implants with the reference device was validated and verification was performed for glenoid guidance and visualization of the patient's boney anatomy.

The Tornier Pyrocarbon Humeral Head associated with the Tornier Flex Stem is indicated for use as a replacement of deficient humeral heads disabled by: - Non-inflammatory degenerative joint diseases (osteoarthritis, avascular necrosis) . - . Traumatic arthritis. The Tornier Pyrocarbon Humeral Head Shoulder Prosthesis, combined with the Tornier Flex Humeral Stem, are to be used only in patients with an intact or reconstructable rotator cuff and if the native glenoid surface is intact or sufficient, where they are intended to increase mobility, stability, and relieve pain. Note: The coated humeral stem is intended for cementless use. The noncoated humeral stem is for cemented use only

The Tornier Pyrocarbon Humeral Head is a prescription use device that is comprised of the pyrolytic carbon (pyrocarbon) articulating surface and a cobalt chromium alloy double taper neck. The humeral head is provided pre-assembled to the double taper to the end user and is compacted onto 510(k) cleared compatible humeral stems (K151293) for replacement of deficient humeral heads disabled by noninflammatory arthritis, or traumatic arthritis. The pyrocarbon articulating surface is made of a graphite substrate core, coated with a layer of pyrolytic carbon deposited onto the substrate via chemical vapor deposition. The pvrocarbon articulating surface is pressed into the cobalt chromium alloy double taper neck during the manufacturing process, is provided as a singular construct to the end user, and is not intended to be disassembled by the end user. Compatible monoblock humeral stems are available in titanium plasma spray coated or uncoated versions. The humeral stems are designed with a female taper connection to accept the mating male taper connection of the pyrocarbon humeral heads.

Hardware: The BLUEPRINT™ Glenoid Guides are patient-specific drill guides. They have been specially designed to assist in the intraoperative positioning of glenoid components used with total anatomic or reversed shoulder arthroplasty procedures using anatomic landmarks that are identifiable on patient-specific preoperative CT scans. Software: BLUEPRINT™ 3D Planning Software is a medical device for surgeons. BLUEPRINT™ 3D Planning Software is intended to be used as a pre-surgical planner for shoulder orthopedic surgery. BLUEPRINT™ 3D Planning Software requires CT scan images showing the anatomical shoulder structure in a DICOM format. BLUEPRINT™ 3D Planning Software allows surgeons to visualize, measure, reconstruct, and annotate anatomic data. BLUEPRINT™ 3D Planning Software allows surgeons to design patient specific guides based on the pre-surgical plan. BLUEPRINT™ 3D Planning Software leads to the generation of a planning report. BLUEPRINT™ 3D Planning Software is to be used for adult men and women only whose bone maturity is reached and should not be used for diagnostic purpose.

BLUEPRINT™ Patient Specific Instrumentation is composed of two components: BLUEPRINT™ Glenoid Guides (hardware) and BLUEPRINT™ 3D Planning Software (software). Hardware: The BLUEPRINT IM Glenoid Guides are patient-specific instruments specially designed to facilitate the implantation of WRIGHT-TORNIER glenoid prostheses. The BLUEPRINT™ Glenoid Guides are designed and manufactured based on a pre-operative plan generated only by the software BLUEPRINT™ 3D Planning Software. Software: BLUEPRINT™ 3D Planning Software is a software connected to an Online Management System (OMS). The user interface software is installed on a computer is intended to be used by orthopedic surgeons, as a preoperative planning software for shoulder arthroplasty surgery (anatomic and reversed). It is intended to help to plan an operation by allowing surgeons to: Plan for shoulder arthroplasty cases, Position and select glenoid and humeral implants, Simulate the prosthetic range of motion, Interact with implants and different computed measurements, Design a patient specific guide for the glenoid component when appropriate.

IN ANATOMIC: The stem and head may be used by themselves, as a hemiarthroplasty, if the natural glenoid provides a sufficient bearing surface, or in conjunction with the glenoid, as a total replacement. The Aequalis Ascend Flex Shoulder System is to be used only in patients with an intact or reconstructable rotator ouff. where it is intended to provide increased mobility and to relieve pain. The Aequalis Ascend Flex Shoulder System is indicated for use as a replacement of shoulder joints disabled by: - Rheumatoid arthritis with pain - Non-inflammatory degenerative joint disease (i.e. osteoarthritis and avascular necrosis) - Correction of functional deformity - Fractures of the humeral head - Traumatic arthritis - Revision of other devices if sufficient bone stock remains IN REVERSE: The Aequalis Ascend Flex Shoulder System is indicated for use as a replacement of shoulder joints for patients with a functional deltoid muscle and with massive and non-repairable rotator cuff-tear with pain disabled by: - Rheumatoid arthritis - Non-inflammatory degenerative joint disease (i.e. osteoarthritis and avascular necrosis) - Correction of functional deformity - Fractures of the humeral head - Traumatic arthritis - Revision of the devices if sufficient bone stock remains. The reversed adapter is indicated for use as components of the Aequalis Ascend Flex Shoulder System total shoulder replacement and for transformation of the Aequalis Ascend Flex Shoulder System into reverse shoulder prosthesis without the removal of the humeral stem during revision surgery for patients with a functional deltoid muscle. The components are permitted to be used in the transformation from anatomic to reverse if the humeral stem is well fixed, the patient has a functional deltoid muscle; the arthropathy is associated with a massive and non-repairable rotator cuff-tear.

The Aequalis Ascend Flex Shoulder System is indicated for use as a replacement of shoulder joints for patients with a functional deltoid muscle and with massive and non-repairable rotator cuff-tear. The Aequalis Reversed Shoulder System is intended to relieve pain and significant disability following massive and non repairable cuff-tear associated to arthropathy and following massive cuff-tear arthroplasty. It is a semi-constrained system composed of a humeral and a glenoid parts. The Aequalis Ascend Flex Shoulder System consists of: - In an Anatomic configuration: a titanium humeral stem offered in Titanium Plasma Spray (Ti PS) coated and un-coated stem versions, a compatible humeral head (CoCr) with a compatible UHMWPE Aequalis glenoid; or UHMWPE Affiniti Anatomic glenoid. The Aequalis Ascend Flex Shoulder System stem and head may be used by themselves, as a hemiarthroplasty, if the natural glenoid provides a sufficient bearing surface, or in conjunction with a glenoid, as a total shoulder joint replacement. - In a Reversed configuration: a titanium humeral stem offered in Titanium Plasma Spray (Ti PS) coated and un-coated stem versions, a reversed adapter with compatible Aequalis Reversed glenoid implants. The reversed adapter is comprised of two components: a titanium tray and a UHMWPE reversed insert. The Aequalis Reversed glenoid implants is comprised of four components: Baseplate: made from Titanium; Glenoid sphere: made from of CoCr; Screw (baseplate/to glenoid sphere): made from CoCr and Fixation screws: made from Titanium. This submission corresponds to the addition of 135° & 140° reversed final angle combinations and the Inlay technique, in addition to the existing 145° angle without any change in the implants design.

Hardware: The BLUEPRINT™ Glenoid Guides are patient-specific drill guides. They have been specially designed to assist in the intraoperative positioning of glenoid components used with total anatomic or reversed shoulder arthroplasty procedures using anatomic landmarks that are identifiable on patient-specific preoperative CT scans. Software: BLUEPRINT™ 3D Planning Software is a medical device for surgeon composed of one software component. It is intended to be used as a pre-surgical planner for shoulder orthopedic surgery. BLUEPRINT™ 3D Planning Software runs on standard personal and business computers running Microsoft Windows or Mac OS operating systems. The software supports DICOM standard to import the CT scan (Computed Tomography) images of the patient. Only CT scan modality can be loaded with BLUEPRINT™ 3D Planning Software. BLUEPRINT™ 3D Planning Software allows surgeon to visualize, measure, reconstruct, annotate and edit anatomic data. It allows surgeon to design glenoid patient-specific guides based on the pre-surgical plan. The software leads to the generation of a surgery report along with a 3D file of the glenoid patient-specific guide. BLUEPRINT™ 3D Planning Software does not include any system to manufacture the glenoid patient-specific guide. BLUEPRINT™ 3D Planning Software is to be used for adult patients only and should not be used for diagnostic purpose.

BLUEPRINT™ Patient Specific Instrumentation is composed of two components: BLUEPRINT™ Glenoid Guides (hardware) and BLUEPRINT™ 3D Planning Software (software). Hardware: The BLUEPRINT™ Glenoid Guides are patient-specially designed to facilitate the implantation of WRIGHT-TORNIER glenoid prostheses. The BLUEPRINT™ Glenoid Guides are designed and manufactured based on a pre-operative plan generated by the BLUEPRINTTM 3D Planning Software. All BLUEPRINT™ Glenoid Guides are patient-specific, single use and delivered non-sterile. Software: BLUEPRINT™ 3D Planning Software is composed of one software component connected to an Online Management System (OMS). The software installed on a computer is intended to be used by orthopedic surgeons, as a preoperative planning software for shoulder arthroplasty surgery (anatomic and reversed). It is intended to help plan an operation by allowing surgeons to: Position and select glenoid implant, Position and select humeral implant, Display bone density and reaming surface, Simulate the prosthetic range of motion, Design a patient specific guide for the glenoid component.

The hardware: The Aequalis Glenoid Guides are patient-specific drill guides. They have been specially designed to assist in the intraoperative positioning of glenoid components used with total anatomic shoulder arthroplasty procedures using anatomic landmarks that are identifiable on patient-specific preoperative CT-scans. Aequalis PerFORM Anatomic Glenoid Guide is used by surgeons to facilitate the placement of the Aequalis PerFORM glenoids and the Aequalis PerFORM + glenoids. The software: The BLUEPRINT 3D planning software is a medical device for surgeon composed of one software component. It is intended to be used as a pre-surgical planner for shoulder orthopedic surgery. BLUEPRINT 3D planning software runs on standard personal and business computers running Microsoft Windows or Mac OS operating systems. The software supports DICOM standard to import the CT-Scan (Computed Tomography) images of the patient. Only CT-Scan modality can be loaded with BLUEPRINT3D planning software. BLUEPRINT 3D planning software allows surgeon to visualize, measure, reconstruct, and annotate anatomic data. It allows surgeon to design patient specific guides based on the presurgical plan. This device is intended for use provided anatomic reference points necessary for positioning of the guide are present on the CT scan. The software leads to the generation of a surgery report along with a 3D file of the patient-specific guide. BLUEPRINT 3D planning software does not include any system to manufacture the guide. BLUEPRINT 3D planning software is to be used for adult patients only and should not be used for Diagnostic purpose.

BLUEPRINT™ Patient Specific Instrumentation is composed of two components: Aequalis Glenoid Guides (hardware) and BLUEPRINT 3D planning software (software). BLUEPRINT™ Patient Specific Instrumentation which includes the Aequalis Glenoid Guides and BLUEPRINT 3D planning software is the responsibility of Tornier is the legal manufacturer for the hardware and the software. The hardware: The Aequalis Glenoid Guides are patient-specific instruments specially designed to facilitate the implantation of the Aequalis PerFORM shoulder prostheses and the Aequalis PerFORM + shoulder prostheses. The Aequalis Glenoid Guides are designed and manufactured based on a pre-operative plan generated only by the software BLUEPRINT™ 3D planning software. The software: BluePrint 3D Planning software is composed of one software component connected to an Online Management System (OMS). The software installed on a computer is intended to be used by orthopedic surgeons, as a preoperative planning software for shoulder arthroplasty surgery (= total anatomic shoulder replacement). It is intended to help -plan an operation by allowing surgeons to: - position and select the glenoid implant, - design a patient specific pin guide.

The Salto Talaris ankle prosthesis is indicated as a total ankle replacement in primary or revision surgery for patients with ankle joints damaged by severe rheumatic, or degenerative arthritis. Components are intended for cemented use only. The Salto XT ankle prosthesis is indicated as a total ankle replacement in revision surgeries only for patients with ankle joints damaged by severe rheumatoid, post-traumatic, or degenerative arthritis. Components are intended for cemented use only.

The cleared Salto Talaris and the new Salto XT are intended for total ankle replacement. Both are a semiconstrained anatomical design, which reproduces the kinematics of the ankle joint. And both consist of two mating components: a metal tibial base in association with a conforming polyethylene articulating insert, and a metal talar component. The submission seeks clearance for: - the addition of new components to the Salto XT (tibial and talar components). - the addition of a new size and new thicknesses to the cleared range of Salto Talaris tibial inserts. The tibial inserts are compatible with both Salto Talaris (K060544, K090076, K130533) and the new Salto XT. The new device Salto XT has been designed to be compatible with the cleared and the new Salto Talaris tibial inserts. All Salto XT components are compatible with cleared Salto Talaris components.

The hardware: The Aequalis Glenoid Guides are patient-specific drill guides. They have been specially designed to assist in the intraoperative positioning of glenoid components used with total anatomic shoulder arthroplasty procedures using anatomic landmarks that are identifiable on patient-specific preoperative CT-scans. Aequalis PerFORM Anatomic Glenoid Guide is used by surgeons to facilitate the placement of the Aequalis PerFORM glenoids. The software: The BLUEPRINT 3D planning software is a medical device for surgeon composed of one software component. It is intended to be used as a pre-surgical planner for shoulder orthopedic surgery. BLUEPRINT 3D planning software runs on standard personal and business computers running Microsoft Windows or Mac OS operating systems. The software supports DICOM standard to import the CT-Scan (Computed Tomography) images of the patient. Only CT-Scan modality can be loaded with BLUEPRINT 3D planning software. BLUEPRINT 3D planning software allows surgeon to visualize, measure, reconstruct, and annotate anatomic data. It allows surgeon to design patient specific guides based on the presurgical plan. This device is intended for use provided anatomic reference points necessary for positioning of the guide are present on the CT scan. The software leads to the generation of a surgery report along with a 3D file of the patient-specific guide. BLUEPRINT 3D planning software does not include any system to manufacture the guide. BLUEPRINT 3D planning software is to be used for adult patients only and should not be used for Diagnostic purpose.

BLUEPRINT™ Patient Specific Instrumentation is composed of two components: Aequalis Glenoid Guides (hardware) and BLUEPRINT 3D planning software (software). BLUEPRINT™ Patient Specific Instrumentation which includes the Aequalis Glenoid Guides and BLUEPRINT 3D planning software is the responsibility of Tornier. Tornier is the legal manufacturer for the hardware and the software. The hardware: The Aequalis Glenoid Guides are patient-specific instruments specially designed to facilitate the implantation of the Aequalis PerFORM shoulder prostheses and are exclusively reserved for this use. The Aequalis Glenoid Guides are designed and manufactured based on a pre-operative plan generated only by the software BLUEPRINT™ 3D planning software. The software: BluePrint 3D Planning software is composed of one software component connected to an Online Management System (OMS). The software installed on a computer is intended to be used by orthopedic surgeons, as a preoperative planning software for shoulder arthroplasty surgery (= total anatomic shoulder replacement). It is intended to help to plan an operation by allowing surgeons to: position and select the glenoid implant, design a patient specific pin guide. This submission seeks clearance for: Hardware: a guide made of Titanium with an orientation hole which allows for controlling rotation of the commercially available implant, AequalisTM PerFORM. Software modified to: Integrate a guide made of titanium, Add a glenoid sphere radius measurement.

IN ANATOMIC: The Aequalis Fx2 humeral stem combined with the Flex Shoulder System humeral head may be used by themselves, as a hemiarthroplasty, if the natural glenoid provides a sufficient bearing surface, or in conjunction with the glenoid, as a total replacement. The Aequalis Fx2 is to be used only in patients with an intact or reconstructable rotator cuff, where it is intended to provide increased mobility and to relieve pain. The Aequalis Ex2 is indicated for use as a replacement of shoulder joints disabled by: - Rheumatoid arthritis with pain - Non-inflammatory degenerative joint disease (i.e. osteoarthritis and avascular necrosis) - Correction of functional deformity - Fractures of the proximal humerus except for size 50mm(1) - Traumatic arthritis - Revision of other devices if sufficient bone stock remains except for size 50mm(1) IN REVERSE: The Aequalis Fx2 is indicated for use as a replacement of shoulder joints for patients with a functional deltoid muscle and with massive and non-repairable rotator cuff-tear with pain disabled by: - Rheumatoid arthritis - Non-inflammatory degenerative joint disease (i.e. osteoarthritis and avascular necrosis) - Correction of functional deformity - Fractures of the proximal humerus except for size 50mm(1 - Traumatic arthritis - Revision of the devices if sufficient bone stock remains except for size 50mm( ).. The reversed insert is permitted to be used in the transformation from anatomic to reverse Aequalis Fx2 without the humeral stem, and if it is well fixed, during a revision surgery, for patient with a functional deltoid muscle.

The Aequalis Fx2 is a non-constrained prosthesis intended for the total or partial replacement of the gleno-humeral articulation. The Aequalis Fx2 consists of: - in an anatomic configuration, a humeral stem compatible with Flex Shoulder System humeral heads (K122698 ; K140082); or - in a reversed configuration, a humeral stem and a reversed insert, compatible with Aequalis Reversed/Aequalis Reversed II glenoid implants (K081059; K140478). The Aequalis Fx2 is intended for use as: - traumatic or pathologic conditions of the shoulder resulting in fracture of the glenohumeral joint, including humeral head fracture and displaced 3-or 4-part proximal humeral fractures, - in case of bone defect in the proximal part of the humerus, - a replacement of shoulder joints in primary anatomic or in primary reverse, - a replacement of other shoulder joints devices in case of revisions if sufficient bone stock remains. The Aequalis Fx2 also allows for conversions from anatomic to reverse shoulder prosthesis in case of revision. This submission corresponds to the design modification related to the Aequalis Fx2 assembly zone (humeral stems and reversed inserts) compatible only with each other. This design modification does not affect the intended use of the device or alter the fundamental scientific technology of the device. The pending humeral stems are compatible with the cleared Flex Shoulder humeral heads and the pending reversed inserts are compatible with the cleared Aequalis Reversed II glenoid implants. There is no change regarding the material of the pending Aequalis Fx2 humeral stems. The design change related to the pending Aequalis Fx2 reversed inserts does not include a titanium locking ring in contrast to the previously cleared Aequalis Fx2 reversed inserts.