(90 days)
MOX-100 Renal Preservation System TM2 Transport Module
Not Found
No
The description focuses on monitoring and controlling perfusion parameters with alarms and data logging, without mentioning any AI/ML capabilities for analysis or decision-making.
No.
The primary function of the device is to maintain kidneys for transplant through controlled perfusion and monitoring of physiological parameters, which is a supportive and preservation function, not a direct therapeutic treatment of a disease or condition in a living patient.
No
The device is designed to maintain and preserve kidneys for transplant, and to monitor and display perfusion parameters. It is not used to diagnose a disease or condition.
No
The device description clearly outlines a physical system with a control unit, designed for controlled kidney perfusion and monitoring of physical parameters like flow, temperature, rate, and pressure. This involves hardware components beyond just software.
Based on the provided information, the Waters Medical Systems RM3 Renal Preservation System is not an IVD (In Vitro Diagnostic).
Here's why:
- Intended Use: The intended use is to "maintain kidneys for transplant." This describes a device used to preserve an organ outside of the body for later transplantation into a patient.
- Device Description: The description focuses on the system's ability to perfuse and monitor the kidney, which are actions performed on the organ itself, not on a sample taken from the patient.
- Lack of IVD Characteristics: The description does not mention any of the typical characteristics of an IVD, such as:
- Analyzing a sample (blood, urine, tissue, etc.) from a patient.
- Providing diagnostic information about a patient's health status.
- Using reagents or assays to detect specific substances.
IVDs are devices used to examine specimens derived from the human body to provide information for diagnostic, monitoring, or compatibility purposes. The RM3 system's function is to preserve an organ, not to analyze a sample for diagnostic purposes.
N/A
Intended Use / Indications for Use
The RM3 Renal Preservation System is intended to be used to maintain kidneys for transplant.
Product codes (comma separated list FDA assigned to the subject device)
78 KDN
Device Description
The RM3 Renal Preservation System is a lightweight, transportable and self-contained renal preservation system, designed to support static monitoring and transportation of kidneys. The RM3 system control unit provides controlled kidney perfusion of hypothermic physiologic solutions, and monitors, displays, trends, and saves important perfusion parameters, including; perfusate flow temperature, rate and pressure, and resistance. The RM3 system control unit can be configured to signal an audio and visual alarm for user-selected limits, and print user-selected data and waveforms.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
kidneys
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
Test results demonstrate that the RM3 control unit performance meets or exceeds the MOX-100 performance for each of the technologically different features.
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s): If the device was cleared using the 510(k) pathway, identify the Predicate Device(s) K/DEN number used to claim substantial equivalence and list them here in a comma separated list exactly as they appear in the text. List the primary predicate first in the list.
MOX-100 Renal Preservation System TM2 Transport Module
Reference Device(s): Identify the Reference Device(s) K/DEN number and list them here in a comma separated list exactly as they appear in the text.
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information for the subject device only (e.g. presence / absence, what scope was granted / cleared under the PCCP, any restrictions, etc).
Not Found
§ 876.5880 Isolated kidney perfusion and transport system and accessories.
(a)
Identification. An isolated kidney perfusion and transport system and accessories is a device that is used to support a donated or a cadaver kidney and to maintain the organ in a near-normal physiologic state until it is transplanted into a recipient patient. This generic type of device may include tubing, catheters, connectors, an ice storage or freezing container with or without bag or preservatives, pulsatile or nonpulsatile hypothermic isolated organ perfusion apparatus with or without oxygenator, and disposable perfusion set.(b)
Classification. Class II (performance standards).
0
Image /page/0/Picture/18 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is an abstract symbol that resembles an eagle or bird in flight, composed of flowing lines.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
JUL 2 9 1997
Re: K971571
Mr. Dave Schollman General Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Waters Instruments, Inc. 2411 Seventh Street, N.W. P.O. Box 6117 Rochester, Minnesota 55903-6117
RM3 Renal Preservation System-control unit ---Dated: April 28, 1997 Received: April 30, 1997 Regulatory class: II 21 CFR §876.5880/Product code: 78 KDN
Dear Mr. Schollman:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your device as described in your 510(K) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predication a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for question and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/odth/dsmamain.html".
Sincerely vours
H.L.Liau Yu
Lillian Yin, Ph.D.
Lillian Yin, Ph.D. Director, Division of Reproductive, Abdominal, Ear, Nose and Throat, and Radiological Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
1
- Submitter Information
-- 510[k] SUMMARY --
JUL 2 9 1997
| Waters Medical Systems, a division of Waters Instruments Inc.
2411 Seventh Street N.W.
Rochester, MN 55903-6117
| Estab't. Registration Number: 2123774 | Contact: | Dave Schollman, General Manager |
|---|---|---|
| Phone: | 800-426-9877 tel | |
| 507-252-3700 fax | ||
| Summary Preparation Date: April 28, 1997 |
- Device Names
| Proprietary Name: | RM3 Renal Preservation System--contol unit |
|---|---|
| Common/Usual Name: | renal preservation system--control unit |
| Classification Name: | Isolated kidney perfusion and transport system and accessories |
| (21 CFR 876.5880) | |
| Classification: | Class II, Gastroenterology/Urology Panel |
- Predicate devices
MOX-100 Renal Preservation System TM2 Transport Module, a pre-amendment device.
4. Device Description
The RM3 Renal Preservation System is a lightweight, transportable and self-contained renal preservation system, designed to support static monitoring and transportation of kidneys. The RM3 system control unit provides controlled kidney perfusion of hypothermic physiologic solutions, and monitors, displays, trends, and saves important perfusion parameters, including; perfusate flow temperature, rate and pressure, and resistance. The RM3 system control unit can be configured to signal an audio and visual alarm for user-selected limits, and print user-selected data and waveforms.
5. Intended use
The RM3 Renal Preservation System is intended to be used to maintain kidneys for transplant.
6. Comparison of technological characteristics
The RM3 and the MOX-100 TM2 control units are identical in intended use and methodology. Both systems utilize pulsatile hypothermic perfusion to maintain kidneys for transplant. They are substantially similar in the means by which the pulsatile flow through the kidneys is accomplished. and both allow the user to maintain and monitor nearly the same important perfusion parameters within similar operating ranges. The control units are different in the RM3 automatically monitors, displays, and trends the perfusate pump rate, systolic, mean and diastolic pressures, perfusate temperature, and real-time arterial flow through each kidney, and calculates the renal resistance of each kidney. In the MOX-100 TM2 units the system operator must visually monitor these parameters by reading analog meters and must manually trend the data and calculate renal resistance. Additionally, control of perfusion pump power and rate and coolant circulation pump power different. Test results demonstrate that the RM3 control unit performance meets or exceeds the MOX-100 performance for each of the technologically different features.
April 28, 1997
2
– ﺮﺩ ﺳ
ATTACHMENT 1: INTENDED USE STATEMENT
The Waters Medical Systems (Waters Instruments, Inc.) RM3 Renal Preservation System is
intended to be used to maintain kidneys for transplant.
Raler R. Ritting/
(Division Sign-Off)
Division of Reproductive, Abdominal, ENT, and Radiological Devices 510(k) Number 971
Prescription Use
(Per 21 CFR 801.109)
Over-the-Counter Use_