(77 days)
Salto Talaris Total Ankle Prosthesis:
The Salto Talaris Total Ankle Prosthesis is indicated as a total ankle replacement in primary or revision surgery for patients with ankle joints damaged by severe rheumatoid, posttraumatic, or degenerative arthritis.
Components are intended for cemented use only.
RHS:
The RHS is intended for:
l) Replacement of the radial head for degenerative or post-traumatic disabilities presenting pain, crepitation and decreased motion at the radiohumeral and/or proximal radio-ulnar joint with:
Joint destruction and/or subluxation visible on x-ray a.
b. Resistance to conservative treatment
2) Primary replacement after fracture of the radial head
3) Symptomatic sequelae after radial head resection
4) Revision following failed radial head arthroplasty
The long stem is for single cemented use only. The short stem coated with titanium plasma-spray is for single use with or without cement.
For the Salto Talaris Total Ankle Prosthesis:
The goal of total ankle replacement is to restore function and relieve pain. The Salto Talaris Total Ankle Prosthesis is intended to accomplish these goals. The Salto Talaris Total Ankle Prosthesis is a semi-constrained anatomical design, which reproduces the kinematics of the ankle joint.
The Tornier Salto Talaris Total Ankle Prosthesis consists of two mating components: a metal tibial base in association with a conforming polyethylene articulating insert, and a metal talar resurfacing component.
For the RHS:
The RHS has been designed in order to provide surgeons and patients with a joint prosthesis to restore function and relieve pain of the radial part of the elbow joint. The RHS has an anatomical design, which reproduces the kinematics of the radial joint. The RHS consists of two components: a metal radial stem and a metal-polyethylene radial head.
The present submission corresponds to the following modification:
- Addition of a new coating subcontractor (titanium coating): Eurocoating S.p.A on cobalt chromium components.
All the prostheses of this application are strictly identical to the previously cleared devices except for the coating supplier. The indications for use of each device are not modified.
Here's an analysis of the provided text regarding the Salto Talaris Total Ankle Prosthesis and RHS, focusing on acceptance criteria and supporting studies.
Important Note: The provided text is a 510(k) summary for a modification to an existing device (specifically, a change in coating subcontractor). Therefore, the "study" described is not a clinical trial demonstrating efficacy of the entire device, but rather a non-clinical assessment to prove that the modification does not alter safety or effectiveness compared to the predicate device.
1. Table of Acceptance Criteria and Reported Device Performance
| Acceptance Criteria (from predicate device standards) | Reported Device Performance (with new coating subcontractor) |
|---|---|
| Coating specifications (e.g., thickness, pore size, pore volume) for titanium coating | Conforms to ASTM standard F1580. Coating characterization (thickness, pore size, pore volume) performed and found substantially equivalent to predicate coating. |
| Shear fatigue strength | Non-clinical testing performed, results showed substantial equivalence to predicate. |
| Static shear strength | Non-clinical testing performed, results showed substantial equivalence to predicate. |
| Static tensile strength | Non-clinical testing performed, results showed substantial equivalence to predicate. |
| Abrasion resistance | Non-clinical testing performed, results showed substantial equivalence to predicate. |
| No new or higher risk introduced by the coating change | Concluded that the new subcontractor "does not induce any new or higher risk compared to the predicate coating subcontractor BioCoat Company." |
| Design, materials, sizes, method of fixation, sterilization process remain identical | "The design, the material, the sizes, the method of fixation and the sterilization process are identical for both devices whatever the coating subcontractor is." |
| Indications for use not modified | "The indications for use of each device are not modified." |
2. Sample Size Used for the Test Set and Data Provenance
- Sample Size: Not explicitly stated as a number of specific "samples" in a traditional sense. The testing was conducted on samples of the coating material and/or coated components. The extent of testing is implied by the mention of "characterization" and various mechanical tests.
- Data Provenance: The data is based on non-clinical testing of the coating and coated components. The specific origin country for the testing laboratory is not mentioned, but the submitting company (Tornier SAS) is based in France. The data is prospective in the sense that the tests were performed to evaluate the new subcontractor's coating.
3. Number of Experts Used to Establish the Ground Truth for the Test Set and Their Qualifications
- Number of Experts: Not applicable in the context of this non-clinical submission. "Ground truth" for this submission would be defined by established engineering and materials standards (e.g., ISO, ASTM).
- Qualifications of Experts: Not applicable. The "experts" involved would be materials scientists and engineers performing the tests and comparing the results to established standards and the predicate device's performance.
4. Adjudication Method for the Test Set
- Adjudication Method: Not applicable. This was a non-clinical comparative analysis against a predicate's performance and established standards, rather than expert adjudication of clinical outcomes or images.
5. If a Multi-Reader Multi-Case (MRMC) Comparative Effectiveness Study Was Done
- Was it done?: No. This submission describes a non-clinical evaluation of a manufacturing change (coating subcontractor) for existing orthopedic implants. It is not a clinical study involving human readers or cases.
6. If a Standalone (i.e., algorithm only without human-in-the-loop performance) Was Done
- Was it done?: No. This is not an AI or algorithm-based device. It's a physical orthopedic implant.
7. The Type of Ground Truth Used
- Type of Ground Truth: The ground truth used for this submission is based on established engineering and materials standards (ISO standard 5834-2, ISO standard 5832-7 or ISO 5832-12, ASTM standard F1580), and the performance characteristics of the predicate device's coating (BioCoat Company). The goal was to prove the new coating was "substantially equivalent" and introduced no new risks.
8. The Sample Size for the Training Set
- Sample Size for Training Set: Not applicable. This is not an AI/ML device that requires a training set. The "training" for such a device would be the extensive research, development, and testing that led to the original design and material choices, which is outside the scope of this specific 510(k) modification.
9. How the Ground Truth for the Training Set Was Established
- How Ground Truth for Training Set Established: Not applicable, as this is not an AI/ML device.
{0}------------------------------------------------
Implants Chirurg
MAY 1 7 2013
Sto (K)Summary of Safety and Effectiveness information Special 510(k) Premarket Notification - Salto Talaris Total Ankle Prosthesis, RHS
Date prepared: May 17th 2013
Regulatory authority: Safe Medical Devices Act of 1990, 21 CRF 807.92
1) Device name
| Trade name: | Salto Talaris Total Ankle Prosthesis |
|---|---|
| Common name: | Total Ankle Prosthesis |
| Classification name: | Ankle joint metal/polymer semi-constrained cemented prosthesis |
| Trade name: | RHS |
| Common name: | Radial Head Prosthesis |
| Classification name: | Elbow joint radial (hemi-elbow) polymer prosthesisElbow joint metal/polymer semi-constrained cemented prosthesis |
2) Submitter
Tornier SAS 161, Rue Lavoisier 38330 Montbonnot Saint Martin - France
3) Applicant
Tornier SAS 161, rue Lavoisier 38330 Montbonnot Saint Martin - France
4) Company contact
Tornier SAS Mrs Séverine Bonneton Project Regulatory Affairs Coordinator 161, rue Lavoisier 38334 Montbonnot Cedex - France Tel: 00 33 4 76 61 35 00 Fax: 00 33 4 76 61 35 59 e-mail : severine.bonneton(a)tornier.com
TORNIER S.A.S. 161, rue Lavoisier 38334 MONTBONNOT CEDEX FRANCE
Tél. : 33 (0)4 76 61 35 00 Fax : 33 (0)4 76 61 35 33
Section 5 - Page 1/ page 4
S.A.S. au capital de 35 043 008 € SIRET : 070 501 275 000 21 R.C.S. : 070 501 275 CODE APE : 3250 A
SIEGE SOCIAL 161, rue Lavoisier - 38330 MONTBONNOT SAINT MARTIN - FRANCE
{1}------------------------------------------------
5) Classification
For the Salto Total Ankle Prosthesis:
Device class: Class II Classification panel: Orthopedic Product code: 87 HSN
For the RHS:
| Device class: | Class II |
|---|---|
| Classification panel: | Orthopedic |
| Product code: | JDB & KWI |
6) Equivalent / Predicate device
For the Salto Talaris Total Ankle Prosthesis:
Salto Talaris Total Ankle Prosthesis. Tornier, K060544, K090076 Alvine Total Ankle Prosthesis (Agility), DePuy, K920802, K020541 Topez Total Ankle Replacement, Topez Orthopedics, Inc., K051023
For the RHS:
Radial Head Prosthesis, Tornier, K994041, K060438 Radial Head, Avanta, K023604 Explor, Biomet, K051385
7) Device description
For the Salto Talaris Total Ankle Prosthesis:
The goal of total ankle replacement is to restore function and relieve pain. The Salto Talaris Total Ankle Prosthesis is intended to accomplish these goals. The Salto Talaris Total Ankle Prosthesis is a semi-constrained anatomical design, which reproduces the kinematics of the ankle joint.
The Tornier Salto Talaris Total Ankle Prosthesis consists of two mating components: a metal tibial base in association with a conforming polyethylene articulating insert, and a metal talar resurfacing component.
For the RHS:
The RHS has been designed in order to provide surgeons and patients with a joint prosthesis to restore function and relieve pain of the radial part of the elbow joint. The RHS has an anatomical design, which reproduces the kinematics of the radial joint. The RHS consists of two components: a metal radial stem and a metal-polyethylene radial head.
Image /page/1/Picture/18 description: The image shows a logo with a stylized letter "T" inside a hexagon. The "T" is composed of thick, bold lines, with the top bar of the "T" being slightly wider than the vertical stem. The hexagon provides a clear, geometric border around the central letter, making the logo distinct and recognizable. The logo is black and white.
TORNIER S.A.S. 161, rue Lavoisier 38334 MONTBONNOT CEDEX FRANCE
Tél. : 33 (0)4 76 61 35 00 Fax : 33 (0)4 76 61 35 33
Section 5 - Page 2/ page 4
S.A.S. au capital de 35 043 008 € SIRET : 070 501 275 000 21 R.C.S. : 070 501 275 CODE APE : 3250 A
{2}------------------------------------------------
Implants Chirurgicau
The present submission corresponds to the following modification:
- Addition of a new coating subcontractor (titanium coating): Eurocoating S.p.A on cobalt chromium components.
All the prostheses of this application are strictly identical to the previously cleared devices except for the coating supplier. The indications for use of each device are not modified.
8) Materials (modified components)
For the Salto Talaris Total Ankle Prosthesis:
The tibial and the talar components are manufactured from cobalt chromium alloy (CoCr) according to ISO standard 5834-2.
The titanium coating conforms to the ASTM standard F1580.
For the RHS:
The short stem is manufactured from cobalt chromium alloy (CoCr) according to ISO standard 5832-7 or ISO 5832-12.
The titanium coating conforms to the ASTM standard F1580.
9) Indications
Salto Talaris Total Ankle Prosthesis:
The Salto Talaris Total Ankle Prosthesis is indicated as a total ankle replacement in primary or revision surgery for patients with ankle joints damaged by severe rheumatoid, posttraumatic, or degenerative arthritis.
Components are intended for cemented use only.
RHS:
The RHS is intended for:
- Replacement of the radial head for degenerative or post-traumatic disabilities presenting pain, crepitation and decreased motion at the radio-humeral and/or proximal radio-ulnar joint with:
- Joint destruction and/or subluxation visible on x-ray a.
- Resistance to conservative treatment b.
-
Primary replacement after fracture of the radial head
-
Symptomatic sequelae after radial head resection
-
Revision following failed radial head arthroplasty
The long stem is for single cemented use only. The short stem coated with titanium plasma-spray is for single use with or without cement.
Image /page/2/Picture/25 description: The image shows a logo with a stylized letter "T" inside of a hexagon. The "T" is bold and has a unique design, with the top part of the "T" appearing to be a separate, smaller "T" placed above the main stem. The logo is black and white, with the "T" being the most prominent feature within the hexagonal border.
TORNIER S.A.S. 161, rue Lavoisier 38334 MONTBONNOT CEDEX FRANCE
Tél. : 33 (0)4 76 61 35 00 Fax : 33 (0)4 76 61 35 33 Section 5 - Page 3/ page 4
S.A.S. au capital de 35 043 008 € SIRET : 070 501 275 000 21 R.C.S. : 070 501 275 CODE APE : 3250 A
{3}------------------------------------------------
10) Summary of technological characteristics
The only change to the cleared devices of the Salto Talaris Total Ankle Prosthesis and the RHS is the addition of a new coating subcontractor: Eurocoating S.p.A
The Eurocoating S.p.A coating has the same specifications currently requested from BioCoat Company: coating specification drawings as well as the intended use of the implants concerned are not modified compared to the already cleared devices.
Process specifications for the application of titanium coating have been provided in Eurocoating S.p.A Master File MAF 1989.
The indications for use, the other technical characteristics (design, materials, manufacturing, sizing, method of fixation) of the Sulto Talaris Total Ankle Prosthesis and the RHS are identical to the predicate devices. The covered zones of the implants concerned remain the same ones
11) Non-clinical testing & Substantial equivalence conclusion
Non-clinical testing (shear fatigue strength, static shear strength test, static tensile strength and abrasion) and coating characterization (thickness, pore size and pore volume) were performed to determinate substantial equivalence.
The design, the material, the sizes, the method of fixation and the sterilization process are identical for both devices whatever the coating subcontractor is.
The results of this evaluation allow us to conclude that the proposed new coating subcontractor Eurocoating S.p.A described in this submission does not induce any new or higher risk compared to the predicate coating subcontractor BioCoat Company and therefore both coating subcontractors (proposed and predicate) are substantially equivalent.
Image /page/3/Picture/11 description: The image shows a logo with a stylized letter 'T' inside a hexagon. The 'T' is composed of thick lines and has a slightly ornate design. The hexagon provides a clear, geometric border around the letter, making it stand out.
TORNIER S.A.S. 161. rue Lavoisier 38334 MONTBONNOT CEDEX FRANCE
Tél. : 33 (0)4 76 61 35 00 Fax : 33 (0)4 76 61 35 33
Section 5 - Page 4/ page 4 S.A.S. au capital de 35 043 008 €
SIRET : 070 501 275 000 21 R.C.S. : 070 501 275 CODE APE : 3250 A
SIEGE SOCIAL 161, rue Lavoisier - 38330 MONTBONNOT SAINT MARTIN - FRANCE
{4}------------------------------------------------
Image /page/4/Picture/0 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle with three tail feathers, representing the department's mission to protect the health of all Americans and provide essential human services. The eagle is positioned within a circular border that contains the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA".
DEPARTMENT OF HEALTH & HUMAN SERVICES
Public Health Service
Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002
Letter dated: May 17, 2013
Tornier SAS % Ms. Séverine Bonneton Project Regulatory Affairs Coordinator 161, Rue Lavoisier 38330 Montbonnot Saint Martin France
Re: K130533
Trade/Device Name: Salto Talaris Total Ankle Prosthesis RHS Regulation Number: 21 CFR 888.3110 Regulation Name: Ankle joint metal/polymer semi-constrained cemented prosthesis Regulatory Class: Class II Product Code: HSN, JDB, KWI Dated: April 18, 2013 Received: April 19, 2013
Dear Ms. Bonneton:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug. and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA), You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical
{5}------------------------------------------------
Page 2 - Ms. Severine Bonneton
device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Small Manufacturers, International and Consumer Assistance at its tollfree number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportalProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.
Sincerely vours.
Mark Newlelkerson -S
Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{6}------------------------------------------------
Indications for Use
510(k) Number (if known): K130533
Device Name: Salto Talaris Total Ankle Prosthesis RHS
Indications For Use:
Salto Talaris Total Ankle Prosthesis:
The Salto Talaris Total Ankle Prosthesis is indicated as a total ankle replacement in primary or revision surgery for patients with ankle joints damaged by severe rheumatoid, posttraumatic, or degenerative arthritis.
Components are intended for cemented use only.
RHS:
The RHS is intended for:
l) Replacement of the radial head for degenerative or post-traumatic disabilities presenting pain, crepitation and decreased motion at the radiohumeral and/or proximal radio-ulnar joint with:
Joint destruction and/or subluxation visible on x-ray a.
b. Resistance to conservative treatment
-
Primary replacement after fracture of the radial head
-
Symptomatic sequelae after radial head resection
-
Revision following failed radial head arthroplasty
The long stem is for single cemented use only. The short stem coated with titanium plasma-spray is for single use with or without cement.
Prescription Use X (Part 21 CFR 801 Subpart D) AND/OR
Over-The-Counter Use (21 CFR 801 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Image /page/6/Picture/22 description: The image contains the text "Casey L. Hanley, Ph.D." above a horizontal line. Below the line, the text "Division of Orthopedic Devices" is present. There is also a logo above the text, which appears to be a stylized design.
§ 888.3110 Ankle joint metal/polymer semi-constrained cemented prosthesis.
(a)
Identification. An ankle joint metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace an ankle joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces and has no linkage across-the-joint. This generic type of device includes prostheses that have a talar resurfacing component made of alloys, such as cobalt-chromium-molybdenum, and a tibial resurfacing component made of ultra-high molecular weight polyethylene and is limited to those prostheses intended for use with bone cement (§ 888.3027).(b)
Classification. Class II.