(19 days)
The SmartStitch® PerfectPasser® System is indicated for use in the placement of suture(s) through soft tissue in arthroscopic and limited access procedures.
The SmartStitch PerfectPasser System is a Class II device consisting of the following components: SmartStitch® PerfectPasser® Connector, SmartStitch® Handle, Suture Cartridge containing Suture.
I am sorry, but the provided text does not contain information about acceptance criteria, device performance, sample sizes for testing, expert qualifications, adjudication methods, multi-reader multi-case studies, standalone performance, types of ground truth, or details about training sets. The document is primarily a regulatory submission letter for a medical device (SmartStitch® PerfectPasser® System) and includes general information about the device and its intended use. Therefore, I cannot fulfill your request for that specific information based on the input provided.
{0}------------------------------------------------
General Information 1
Submitter Name/Address
ArthroCare Corporation 7000 West William Cannon Drive Austin, TX 78735
Contact Person:
Contact Number(s) and Email Address:
Manufacturing Facilities
Cheryl Frederick
Director, Regulatory Affairs
Direct: 512-391-5751 512-895-1489 Fax:
Email: Cheryl.Frederick@arthrocare.com
3006524618
ArthroCare Corporation 15285 Alton Parkway, #200 Irvine, CA 92618
ArthroCare Costa Rica 502 Parkway, Global Park La Aurora, Heredia Costa Rica
Establishment Registration Numbers
Irvine, CA: 2032380
Austin, TX:
Costa Rica: 3003780898
Sterilization Facility
SteriGenics Corporation 7775 S. Quincy Willowbrook, IL 60527
Device Identification (System Components)
The SmartStitch PerfectPasser System is a Class II device consisting of the following components:
SmartStitch® PerfectPasser® Connector Trade/Proprietary Name: Suture Passer Classification Name: Product Code: NBH CFR Section: 21 CFR 888.1100 Device Class: Classification Panel: Orthopedic
SmartStitch® Handle Trade/Proprietary Name: Suture Passer (Handle) Classification Name: Product Code: NBH CFR Section: 21 CFR 888.1100 Class I Device Class: Classification Panel: Orthopedic
NOV 7 2012
Page 1
{1}------------------------------------------------
Suture Cartridge containing Suture Trade/Proprietary Name: Suture, Nonabsorbable, Synthetic, Polyethylene Classification Name: Product Code: GAT 21 CFR 878.5000 CFR Section: Device Class: Class II Classification Panel: General & Plastic Surgery
{2}------------------------------------------------
DEPARTMENT OF HEALTH & HUMAN SERVICES
Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health and Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is a stylized symbol that resembles an abstract human form or a caduceus, a symbol often associated with healthcare.
Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-002
Arthrocare Corporation % Ms. Cheryl Frederick Director, Regulatory Affairs 7000 West William Cannon Drive Austin, Texas 78735
November 7, 2012
Re: K123268
Trade/Device Name: SmartStitch® Perfect Passer® System Regulation Number: 21 CFR 878.5000 Regulation Name: Nonabsorbable polyethylene terephthalate surgical suture Regulatory Class: Class II Product Code: GAT, NBH Dated: October 18, 2012 Received: October 19, 2012
Dear Ms. Frederick:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set
{3}------------------------------------------------
Page 2 - Ms. Cheryl Frederick
forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic form in the quality by steeling (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Patt 801), please 11 you desire specific ad 1100 ter your Centers offices/CDRH/CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please the Concertor Dorieted and states and ing by reference to premarket notification" (21CFR Part note to regalation interest ding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Tou may of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm.
Sincerely yours,
Peter D. Rumm -5 .
Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health
ーズ
Enclosure
{4}------------------------------------------------
Indications for Use
4-123268 510(k) Number (if known):
Device Name: SmartStitch® PerfectPasser® System
Indications for Use:
The SmartStitch® PerfectPasser® System is indicated for use in the placement of suture(s) through soft tissue in arthroscopic and limited access procedures.
Prescription Use X (Part 21 CFR 801 Subpart D)
AND/OR
Over-The-Counter Use (21 CFR 801 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Daniel Komeku MM
(Division Sign Off)
(Division Sign-Off) Division of Surgical. Orthopedic, and Restorative Devices
510(k) Number K123268
§ 878.5000 Nonabsorbable poly(ethylene terephthalate) surgical suture.
(a)
Identification. Nonabsorbable poly(ethylene terephthalate) surgical suture is a multifilament, nonabsorbable, sterile, flexible thread prepared from fibers of high molecular weight, long-chain, linear polyesters having recurrent aromatic rings as an integral component and is indicated for use in soft tissue approximation. The poly(ethylene terephthalate) surgical suture meets U.S.P. requirements as described in the U.S.P. Monograph for Nonabsorbable Surgical Sutures; it may be provided uncoated or coated; and it may be undyed or dyed with an appropriate FDA listed color additive. Also, the suture may be provided with or without a standard needle attached.(b)
Classification. Class II (special controls). The special control for this device is FDA's “Class II Special Controls Guidance Document: Surgical Sutures; Guidance for Industry and FDA.” See § 878.1(e) for the availability of this guidance document.