(90 days)
Not Found
No
The device description and intended use focus on the physical characteristics and materials of the intervertebral body fusion device. There is no mention of AI or ML in the document.
Yes
The device is an intervertebral body fusion device indicated for use in patients with degenerative disc disease, which aims to treat a medical condition.
No
This device is an intervertebral body fusion device (implant) used for treating degenerative disc disease, not for diagnosing it.
No
The device description clearly states it is a physical implant made of PEEK and Tantalum, intended for surgical implantation. It is a hardware device, not software.
No, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- IVD Definition: In Vitro Diagnostic devices are used to examine specimens taken from the human body (like blood, urine, tissue) to provide information for diagnosis, monitoring, or screening.
- Device Description and Intended Use: The Stryker Spine AVS® AL PEEK Spacers are implants designed to be surgically placed within the body (specifically, the spine) to aid in spinal fusion. They are a physical device used in a surgical procedure, not a test performed on a sample outside the body.
- Lack of IVD Characteristics: The description doesn't mention any analysis of biological samples, reagents, or laboratory procedures, which are hallmarks of IVD devices.
This device is a Class II medical device (based on the mention of "Class II Special Controls Guidance Document") used for surgical implantation.
N/A
Intended Use / Indications for Use
The Stryker Spine AVS® AL PEEK Spacers are intervertebral body fusion devices indicated for use with autogenous bone graft in patients with degenerative disc disease (DDD) at one level or two contiguous levels from L2 to S1.
DDD is defined as back pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies. The DDD patients may also have up to Grade I spondylolisthesis at the involved level(s). These patients should be skeletally mature and have six months of nonoperative therapy.
The AVS® AL Peek Spacers are to be implanted via an anterior or anterolateral approach.
The AVS® AL PEEK Spacers are intended to be used with supplemental spinal fixation systems that have been cleared for use in the lumbosacral spine (i.e., posterior pedicle screw and rod systems).
Product codes (comma separated list FDA assigned to the subject device)
MAX
Device Description
The AVS® AL Peek Spacers are intervertebral body fusion devices intended for use as an aid in spinal fixation. The Stryker Spine AVS® AL PEEK Spacer is a ring shaped, hollow frame implant with lateral fenestrations, machined from medical grade PEEK OPTIMA™ LT1 that is radiolucent and incorporates three (3) Tantalum marker pins to aid in radiographic visualization. The upper and lower aspects of the subject device are open, and the superior and inferior surfaces have serrations that assist in the anchorage and seating of the device.
The subject devices are manufactured out of the following materials:
Spacers: Polyetheretherketone (PEEK) OPTIMA™ LT1 (ASTM F2026)
Marker Pins: Tantalum (ASTM F560).
The Stryker Spine AVS™ AL PEEK Spacer family is comprised of six (6) different heights (10, 12, 14, 16, 18 and 20mm), two (2) lengths (22 mm and 28 mm), two (2) widths (28 mm and 33 mm) and lordotic angles of 4° and 8 °, which allows the surgeon to best choose the size suited to the patient's anatomy and pathology. (Implant drawings and part numbers can be found in Section 11 of this application).
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
L2 to S1
Indicated Patient Age Range
Skeletally mature
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
Testing in compliance with FDA's June 12, 2007 "Class II Special Controls Guidance Document: Intervertebral Body Fusion Device" was performed for the AVS® AL PEEK Spacers and demonstrated substantial equivalent performance characteristics to the identified predicate device systems. Testing Reports can be found in Section 18 of this application.
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s): If the device was cleared using the 510(k) pathway, identify the Predicate Device(s) K/DEN number used to claim substantial equivalence and list them here in a comma separated list exactly as they appear in the text. List the primary predicate first in the list.
Reference Device(s): Identify the Reference Device(s) K/DEN number and list them here in a comma separated list exactly as they appear in the text.
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information for the subject device only (e.g. presence / absence, what scope was granted / cleared under the PCCP, any restrictions, etc).
Not Found
§ 888.3080 Intervertebral body fusion device.
(a)
Identification. An intervertebral body fusion device is an implanted single or multiple component spinal device made from a variety of materials, including titanium and polymers. The device is inserted into the intervertebral body space of the cervical or lumbosacral spine, and is intended for intervertebral body fusion.(b)
Classification. (1) Class II (special controls) for intervertebral body fusion devices that contain bone grafting material. The special control is the FDA guidance document entitled “Class II Special Controls Guidance Document: Intervertebral Body Fusion Device.” See § 888.1(e) for the availability of this guidance document.(2) Class III (premarket approval) for intervertebral body fusion devices that include any therapeutic biologic (e.g., bone morphogenic protein). Intervertebral body fusion devices that contain any therapeutic biologic require premarket approval.
(c)
Date premarket approval application (PMA) or notice of product development protocol (PDP) is required. Devices described in paragraph (b)(2) of this section shall have an approved PMA or a declared completed PDP in effect before being placed in commercial distribution.
0
| Submitter: | Stryker Spine
2 Pearl Court
Allendale, New Jersey 07401 |
|-----------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Contact Person | Ms. Vikki M. O'Connor
Regulatory Consultant
Phone: 201-760-8215
FAX: 201-760-8415
Email: vikki.o'connor@stryker.com |
| Date Prepared | January 12, 2009 |
| Trade Name | Stryker Spine AVS® AL PEEK Spacers |
| Proposed Class | Class II |
| Classification Name
and Number | Intervertebral body fusion device, 21 CFR 888.3080 |
| Product Code | MAX |
| Predicate Devices | Stryker Spine AVS® PL PEEK Spacers: K073470
Pillar XL Peek Spacers: K082235
DePuy AcroMed, Inc. Lumbar I/F Cage® (i.e., Brantigan Cage)
with VSP Spine System: P960025. |
| Device Description | The AVS® AL Peek Spacers are intervertebral body fusion
devices intended for use as an aid in spinal fixation. The
Stryker Spine AVS® AL PEEK Spacer is a ring shaped, hollow
frame implant with lateral fenestrations, machined from medical
grade PEEK OPTIMATM LT1 that is radiolucent and
incorporates three (3) Tantalum marker pins to aid in
radiographic visualization. The upper and lower aspects of the
subject device are open, and the superior and inferior surfaces
have serrations that assist in the anchorage and seating of the
device. |
| | The subject devices are manufactured out of the following |
| | materials: |
| | Spacers: Polyetheretherketone (PEEK) OPTIMA™ LT1
(ASTM F2026) |
| | Marker Pins: Tantalum (ASTM F560). |
| | The Stryker Spine AVS™ AL PEEK Spacer family is comprised |
| | of six (6) different heights (10, 12, 14, 16, 18 and 20mm), two |
| | (2) lengths (22 mm and 28 mm), two (2) widths (28 mm and 33 |
| | mm) and lordotic angles of 4° and 8 °, which allows the surgeon |
| | to best choose the size suited to the patient's anatomy and |
| | pathology. (Implant drawings and part numbers can be found in |
| | Section 11 of this application). |
| Intended Use | The Stryker Spine AVS® AL PEEK Spacers are intervertebral |
| | body fusion devices indicated for use with autogenous bone graft |
| | in patients with degenerative disc disease (DDD) at one level or |
| | two contiguous levels from L2 to S1. |
| | |
| | DDD is defined as back pain of discogenic origin with |
| | degeneration of the disc confirmed by history and radiographic |
| | studies. The DDD patients may also have up to Grade I |
| | spondylolisthesis at the involved level(s). These patients should |
| | be skeletally mature and have six months of nonoperative |
| | therapy. |
| | |
| | The AVS® AL PEEK Spacers are to be implanted via an anterior |
| | or anterolateral approach. |
| | |
| | The AVS® AL PEEK Spacers are intended to be used with |
| | supplemental spinal fixation systems that have been cleared for |
| | use in the lumbosacral spine (i.e., posterior pedicle screw and |
| | rod systems). |
| Summary of the | Testing in compliance with FDA's June 12, 2007 "Class II |
| Technological | Special Controls Guidance Document: Intervertebral Body |
| Characteristics | Fusion Device" was performed for the AVS® AL PEEK Spacers |
| | and demonstrated substantial equivalent performance |
| | characteristics to the identified predicate device systems. Testing |
| | Reports can be found in Section 18 of this application. |
510(k) Summary: AVS® AL PEEK Spacers
Image /page/0/Picture/5 description: The image shows a date, "APR 22 2009". The month is April, the day is the 22nd, and the year is 2009. The text is in a bold, sans-serif font. The text is black on a white background.
1
page 1 of 3
2
.
page 3 of 3
3
Image /page/3/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular border with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is an abstract symbol resembling an eagle or bird in flight, with stylized lines forming its wings and body.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Stryker Spine % Ms. Vikki O'Connor Regulatory Consultant 2 Pearl Court Allendale, New Jersey 07401
APR 2 2 2009
Re: K090166
Trade/Device Name: Stryker Spine AVS® AL PEEK Spacers Regulation Number: 21 CFR 888.3080 Regulation Name: Intervertebral body fusion device Regulatory Class: II Product Code: MAX Dated: January 21, 2009 Received: January 22, 2009
Dear Ms. O'Connor:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
4
Page 2- Ms. Vikki O'Connor
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Center for Devices and Radiological Health's (CDRH's) Office of Compliance at (240) 276-0120. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please contact the CDRH/Office of Surveillance and Biometrics/Division of Postmarket Surveillance at 240-276-3464. For more information regarding the reporting of adverse events, please go to http://www.fda.gov/cdrh/mdr/.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (240) 276-3150 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.
Sincerely yours,
for
Mark N. Melkerson Director Division of General, Restorative, and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
5
Indications for Use
510(k) Number (if known): K 090/66 Device Name: Stryker Spine AVS® AL PEEK Spacers
Indications For Use:
The Stryker Spine AVS® AL PEEK Spacers are intervertebral body fusion devices indicated for use with autogenous bone graft in patients with degenerative disc disease (DDD) at one level or two contiguous levels from L2 to S1.
DDD is defined as back pain of discogenic origin with degeneration of the disc confirmed by history and radiographic studies. The DDD patients may also have up to Grade I spondylolisthesis at the involved level(s). These patients should be skeletally mature and have six months of nonoperative therapy.
The AVS® AL Peek Spacers are to be implanted via an anterior or anterolateral approach.
The AVS® AL PEEK Spacers are intended to be used with supplemental fixation systems that have been cleared for use in the lumbosacral spine (i.e., posterior pedicle screw and rod systems).
Prescription Use x (Part 21 CFR 801 Subpart D) AND/OR
Over-The-Counter Use (21 CFR 807 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
n Sign-Off) Division of General, Restorative, Page 1 of 1 and Neurological Devices
510(k) Number C690164