(91 days)
Not Found
Not Found
No
The summary does not mention AI, ML, or any related terms, and the device description is not available to provide further clues.
No
The device is used to image harvested specimens for biopsy verification, not to treat a patient.
Yes
The device is used to provide "rapid verification that the correct tissue has been excised during the biopsy procedure," which directly aids in diagnosis by confirming the presence and accuracy of the biopsied sample.
No
The device is described as a "Cabinet x-ray system," which inherently includes hardware components for generating and capturing x-ray images.
Based on the provided information, the DX-50 is not an IVD (In Vitro Diagnostic).
Here's why:
- IVDs are used to examine specimens from the human body to provide information about the human body. This typically involves tests performed on blood, urine, tissue samples, etc., to diagnose diseases, monitor health, or screen for conditions.
- The DX-50 is used to provide images of harvested specimens. Its purpose is to verify that the correct tissue has been excised, essentially confirming the physical presence and location of the specimen. It's a tool for imaging the specimen itself, not for performing a diagnostic test on the specimen to gain information about the patient's health status.
- The intended use focuses on procedural verification and efficiency. The benefits mentioned are faster case completion and reduced patient recalls, which are related to the surgical or biopsy procedure, not a diagnostic assessment of the patient's health based on the specimen's properties.
In essence, the DX-50 is an imaging device used to visualize a specimen, not a diagnostic test performed on the specimen.
N/A
Intended Use / Indications for Use
The DX-50 is a Cabinet x-ray system that is used to provide digital x-ray images of harvested specimens from various anatomical regions in order to provide rapid verification that the correct tissue has been excised during the biopsy procedure.
Doing the verification directly in the same room or nearby enables cases to be completed faster, thus limiting the time the patient needs to be under examination. Specimen radiography can potentially limit the number of patient recalls.
Product codes
MWP
Device Description
Not Found
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
x-ray
Anatomical Site
various anatomical regions (of harvested specimens)
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
Not Found
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s): If the device was cleared using the 510(k) pathway, identify the Predicate Device(s) K/DEN number used to claim substantial equivalence and list them here in a comma separated list exactly as they appear in the text. List the primary predicate first in the list.
Not Found
Reference Device(s): Identify the Reference Device(s) K/DEN number and list them here in a comma separated list exactly as they appear in the text.
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 892.1680 Stationary x-ray system.
(a)
Identification. A stationary x-ray system is a permanently installed diagnostic system intended to generate and control x-rays for examination of various anatomical regions. This generic type of device may include signal analysis and display equipment, patient and equipment supports, component parts, and accessories.(b)
Classification. Class II (special controls). A radiographic contrast tray or radiology diagnostic kit intended for use with a stationary x-ray system only is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 892.9.
0
Image /page/0/Picture/1 description: The image is a black and white logo for the U.S. Department of Health & Human Services. The logo features a stylized eagle with its wings spread, and the words "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" are arranged in a circular pattern around the eagle. The eagle is composed of three curved lines that form the shape of the bird's body and wings. The text is in a simple, sans-serif font.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
SEP - 6 2006
Mr. Douglas C. Wiegman VP Engineering Faxitron X-ray Corporation 225 Larkin Drive, Suite 1 WHEELING IL 60090-7209
Re: K061361
Trade/Device Name: Dx-50 Digital Radiography System Regulation Number: 21 CFR 892 1680 Regulation Name: Stationary x-ray system Regulatory Class: II Product Code: MWP Dated: July 26, 2006 Received: July 27, 2006
Dear Mr. Wiegman:
This letter corrects our substantially equivalent letter of August 15, 2006.
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21
Image /page/0/Picture/13 description: The image shows a circular logo with the letters "FDA" in a stylized font at the center. Below the letters, the word "Centennial" is written. The logo is surrounded by a dotted border, and there are some words along the top and bottom edges of the circle, but they are not clear enough to read. The logo appears to be a commemorative or celebratory design related to the FDA.
ling Public . Health
1
CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (sections 531-542 of the Act); 21 CFR 1000-1050.
This letter will allow you to continue marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at (240) 276-0120. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (240) 276-3150 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html
Sincerely yours,
Javid G. Lozano
Nancy C. Brogg Director, Division of Reproductive, Abdominal, and Radiological Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
2
STATEMENT OF INDICATIONS FOR USE
510(K) Number (if known):
Kob1361
Device Name: DX-50 Digital Radiography System
Indications for Use: The DX-50 is a Cabinet x-ray system that is used to provide digital x-ray images of harvested specimens from various anatomical regions in order to provide rapid verification that the correct tissue has been excised during the biopsy procedure.
Doing the verification directly in the same room or nearby enables cases to be completed faster, thus limiting the time the patient needs to be under examination. Specimen radiography can potentially limit the number of patient recalls.
Prescription Use
(Per 21 CFR 801 Subpart D) AND/OR Over-The-Counter Use
(Per 21 CFR 801 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE – CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Dancy Brogdon
(Division Sign-Off)
Division of Reproductive, Abdominal,
and Radiological Devices
510(k) Number K061361
Faxitron X-ray Corporation
DX-50 510(k) Submission