(89 days)
The Sleepnet MoJo™ Full Face Mask is intended to be used with positive airway pressure devices, such as CPAP or bi-level, operating at or above 3 cm H2O for the treatment of adult obstructive sleep apnea.
The mask is intended for single patient use and reuse in the home or hospital/institutional environment. The mask is to be used on adult patients (>30kg) for whom positive airway pressure therapy has been prescribed.
The Sleepnet MoJo™ Full Face Mask is an externally placed mask covering the nose and mouth of the patient. It provides a seal such that positive pressure from a positive pressure source is directed to the patient's nose and mouth when either or both are open. It is held in place with an adjustable headgear. It may be cleaned with mild detergent, such as Ivory® dishwasher liquid, in water. The cleaning process requires limited disassembly.
The mask consists of a molded flexible polyvinylchloride shell with a soft, resilient polyurethane encased silicone gel skin-contacting seal that conforms to the patient's facial features. The polvvinylchloride shell contains a malleable metal insert that allows the user to adjust the entire perimeter of the facial seal in any configuration.
The mask connects to a conventional air delivery hose between the mask and the positive airwav pressure source via a standard 22 mm polycarbonate elbow/swivel/valve assembly. The elbow/swivel/valve assembly attaches to the front of the mask with a polycarbonate split "c" clip.
The air delivery system consists of a 22mm polycarbonate swivel connector for 22mm tubing. The built in vent ports are located on the elbow/swivel/valve assembly to provide a continuous air leak to prevent rebreathing of deadspace CO2, direct air away from the patient's face and chest, and eliminate the need for a separate exhalation device. The vent ports also allow the patient to exhale normally and do not interfere with the other performance requirements of the device. The vent ports may be visually checked for obstruction prior to use. The elbow/swivel/valve assembly also includes a built in Anti-Asphyxia Valve which allows the patient to continue to breathe fresh air in the event of positive air pressure device failure or output deterioration, or delivery hose kinking/obstruction.
An optional polypropylene adapter sold separately as an accessory may be used to connect to a pressure measurement or oxygen delivering device.
The Sleepnet MoJo™ Full Face Mask assembly will be packaged along with an instructions for use sheet in a standard poly bag.
The Sleepnet MoJo™ headgear is available in a variety of sizes to fit a broad range of facial structures, and attaches to the mask via slots contained within the shell.
The provided text is a 510(k) summary for a medical device called the "Sleepnet MoJo™ Full Face Mask". This document is a regulatory submission to the FDA for market clearance, not a scientific study report. Therefore, it does not contain the detailed information required to fill out a table of acceptance criteria, device performance, or study specifics like sample sizes, ground truth establishment, or expert qualifications as typically found in clinical trials or performance studies.
The document primarily focuses on demonstrating "substantial equivalence" to a predicate device based on technological characteristics and tests performed. It does not describe a clinical study designed to prove specific performance metrics against pre-defined acceptance criteria with the rigor of a clinical trial.
Here's what can be extracted and what cannot:
- Acceptance Criteria & Device Performance: The document states, "Tests performed on the Sleepnet MoJo™ Full Face Mask demonstrate substantial equivalence to the predicate device listed above." However, it does not list specific acceptance criteria (e.g., "leakage rate must be < X mL/min at Y cmH2O") nor does it report the device's performance against such criteria. It implies that some tests were done to show equivalence, but the details are absent.
- Study Design/Methodology: There is no mention of a formal clinical study, test set, training set, experts, or ground truth in the context described in your request. The "tests performed" refer to engineering or bench testing to show the mask functions similarly to the predicate device, not clinical performance for diagnostic or treatment accuracy.
- MRMC, Standalone, Data Provenance, Sample Size: This information is not present because such studies are not described in the document.
In summary, based on the provided text, a table detailing acceptance criteria and study results cannot be accurately constructed. The document asserts substantial equivalence based on technological characteristics and unspecified tests, rather than presenting data from a clinical performance study with specific acceptance criteria.
{0}------------------------------------------------
MAY 2
Ko60273
510(k) Summary of Safety and Effectiveness
This summary of 510(k) safety and effectiveness information is being submitted in accordance with the requirements of SMDA 1990 and 21 CFR 807.92.
- Submitter Name: Submitter Address : Contact Person: Phone Number: Fax Number: Date Prepared: Device Trade Name: Device Common Name: Classification Name: Predicate devices: Reason for submission: Device Description:
Sleepnet Corp. 1050 Perimeter Rd. Manchester, NH 03103 Paul Chiesa (603) 624-1911 (603) 641-9440 January, 2006 Sleepnet MoJo™ Nasal Mask Ventilator, Noncontinuous (Respirator), 73BZD TMS Full Advantage™, K043382 This device has not been previously marketed in the USA.
The Sleepnet MoJo™ Full Face Mask is an externally placed mask covering the nose and mouth of the patient. It provides a seal such that positive pressure from a positive pressure source is directed to the patient's nose and mouth when either or both are open. It is held in place with an adjustable headgear. It may be cleaned with mild detergent, such as Ivory® dishwasher liquid, in water. The cleaning process requires limited disassembly.
The mask consists of a molded flexible polyvinylchloride shell with a soft, resilient polyurethane encased silicone gel skin-contacting seal that conforms to the patient's facial features. The polvvinylchloride shell contains a malleable metal insert that allows the user to adjust the entire perimeter of the facial seal in any configuration.
The mask connects to a conventional air delivery hose between the mask and the positive airwav pressure source via a standard 22 mm polycarbonate elbow/swivel/valve assembly. The elbow/swivel/valve assembly attaches to the front of the mask with a polycarbonate split "c" clip.
The air delivery system consists of a 22mm polycarbonate swivel connector for 22mm tubing. The built in vent ports are located on the elbow/swivel/valve assembly to provide a continuous air leak to prevent rebreathing of deadspace CO2, direct air away from the patient's face and chest, and eliminate the need for a separate exhalation device. The vent ports also allow the patient to exhale normally and do not interfere with the other performance requirements of the device. The vent ports may be visually checked for obstruction prior to use. The elbow/swivel/valve assembly also includes a built in Anti-Asphyxia Valve which allows the patient to continue to breathe fresh air in the event of positive air pressure device failure or output deterioration, or delivery hose kinking/obstruction.
An optional polypropylene adapter sold separately as an accessory may be used to connect to a pressure measurement or oxygen delivering device.
The Sleepnet MoJo™ Full Face Mask assembly will be packaged along with an instructions for use sheet in a standard poly bag.
The Sleepnet MoJo™ headgear is available in a variety of sizes to fit a broad range of facial structures, and attaches to the mask via slots contained within the shell.
Intended Use:
The Sleepnet MoJo™ Full Face Mask is intended to be used with positive airway pressure devices, such as CPAP or bi-level, operating at or above 3 cm H2O for the treatment of adult obstructive sleep apnea.
{1}------------------------------------------------
The mask is intended for single patient use and reuse in the home or hospital/institutional environment. The mask is to be used on adult patients (>30kg) for whom positive airway pressure therapy has been prescribed.
Substantial Equivalence/ Device Technological Characteristics and Comparison to Predicate Device(s):
The technological characteristics of the Sleepnet MoJo™ Full Face Mask are equivalent to the predicate device listed above.
Tests performed on the Sleepnet MoJo™ Full Face Mask demonstrate substantial equivalence to the predicate device listed above.
Conclusion:
The Sleepnet MoJo™ Full Face Mask is substantially equivalent to the predicate device in terms of safety, effectiveness, and performance.
{2}------------------------------------------------
Image /page/2/Picture/1 description: The image shows the logo for the Department of Health and Human Services (HHS). The logo features a stylized depiction of an eagle or bird-like figure with three overlapping profiles, suggesting a sense of community or collaboration. The text "DEPARTMENT OF HEALTH AND HUMAN SERVICES - USA" is arranged in a circular fashion around the bird symbol.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
.
MAY 2 2005
Mr. Paul Chiesa President Sleepnet Corporation 1050 Perimeter Road Manchester, New Hampshire 03103
Re: K060273
Trade/Device Name: Sleepnet MoJo™ Full Face Mask Regulation Number: 21 CFR 868.5905 Regulation Name: Noncontinuous Ventilator (IPPB) Regulatory Class: II Product Code: BZD Dated: January 31, 2006 Received: February 2, 2006
Dear Mr. Chiesa:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898, In addition, FDA may publish further announcements concerning your device in the Federal Register.
{3}------------------------------------------------
Page 2 - Mr. Chiesa
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at (240) 276-0120. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.
Sincerely yours.
Clive
Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
Indications for Use
510(k) Number: ______ 6 0 27 3
Device Name: Sleepnet MoJo™ Full Face Mask
Indications For Use:
The Sleepnet MoJo™ Full Face Mask is intended to be used with positive airway pressure devices, such as CPAP or bi-level, operating at or above 3 cm H2O for the treatment of adult obstructive sleep apnea.
The mask is intended for single patient use and reuse in the home or hospital/institutional environment. The mask is to be used on adult patients (>30kg) for whom positive airway pressure therapy has been prescribed.
Prescription Use × (Part 21 CFR 801 Subpart D) AND/OR
Over-The-Counter Use (21 CFR 807 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Jumliam
...ology, General Hosp.
...nel. Dental Devices
KDK 1273
Page 1 of
§ 868.5905 Noncontinuous ventilator (IPPB).
(a)
Identification. A noncontinuous ventilator (intermittent positive pressure breathing-IPPB) is a device intended to deliver intermittently an aerosol to a patient's lungs or to assist a patient's breathing.(b)
Classification. Class II (performance standards).