(86 days)
A patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner.
Classified by FDA's General and Plastic Surgery Device Panel as Class I, 21 CFR 880.6250, Pre-powder Vinyl Patient Examination Glove, 80LYZ , powdered with Absorbable Dusting Powder, USP, Class III and meets all requirements of ASTM Standard D5250-92.
The provided text describes the submission for a 510(k) premarket notification for "SHANGHAI COSMOS CORP. Pre-powdered Vinyl Examination Gloves". This document focuses on the substantial equivalence of the device to a predicate device and adherence to established standards for medical examination gloves. It is not a study describing AI performance or an AI-powered device. Therefore, most of the questions regarding AI-specific criteria cannot be answered from the provided text.
Here's an analysis based on the information provided, recognizing that the core request for AI-specific criteria is largely unaddressable:
1. A table of acceptance criteria and the reported device performance
| Acceptance Criteria (Standard / Test) | Reported Device Performance |
|---|---|
| ASTM D-5250-92 (Physical and Dimensions) | Meets all requirements (Inspection Level S-2, AQL 4.0) |
| FDA 1000 ml. Water Fill Test | Meets requirements (Samplings of AQL 2.5, Inspection Level S-4) |
| Primary Skin Irritation Testing | Results showing no primary skin irritant reactions |
| Skin Sensitization (allergic contact dermatitis) Testing | Results showing no sensitization reactions |
| 21 CFR references (e.g., GMPs) | Operates in compliance with FDA's GMPs; conforms fully to applicable 21 CFR references |
| Pinhole FDA requirements | Meets pinhole FDA requirements |
| Bio-compatibility requirements | Meets bio-compatibility requirements |
| Labeling claims | Meets labeling claims (no special or hypoallergenic claims) |
2. Sample size used for the test set and the data provenance (e.g. country of origin of the data, retrospective or prospective)
- Test Set Sample Size:
- For Physical and Dimensions Testing: Inspection Level S-2, AQL 4.0 (specific sample size from this AQL is not provided, but it's a standard sampling plan).
- For FDA 1000 ml. Water Fill Test: Samplings of AQL 2.5, Inspection Level S-4 (specific sample size from this AQL/Inspection Level is not provided).
- For Primary Skin Irritation and Skin Sensitization: Sample sizes are not explicitly mentioned.
- Data Provenance: The tests were conducted for "SHANGHAI COSMOS CORP. Production" which is based in Shanghai, China. The document does not specify if the testing was performed in China or elsewhere, or if it was retrospective or prospective. Given it's a pre-market submission, it would be prospective testing performed on the manufactured product.
3. Number of experts used to establish the ground truth for the test set and the qualifications of those experts (e.g. radiologist with 10 years of experience)
This question is not applicable. The device is a physical product (examination gloves), and its performance is evaluated against material standards and explicit physical/biological tests, not by expert consensus on interpretations of data or images.
4. Adjudication method (e.g. 2+1, 3+1, none) for the test set
This question is not applicable. Adjudication methods like 2+1 or 3+1 are used for expert review of images or data where subjective interpretation is involved. For physical product testing against objective standards, such adjudication is not relevant.
5. If a multi reader multi case (MRMC) comparative effectiveness study was done, If so, what was the effect size of how much human readers improve with AI vs without AI assistance
This question is not applicable. This is concerning an examination glove, not an AI-powered diagnostic device.
6. If a standalone (i.e. algorithm only without human-in-the loop performance) was done
This question is not applicable. This is concerning an examination glove, not an AI algorithm.
7. The type of ground truth used (expert consensus, pathology, outcomes data, etc)
The "ground truth" for this device's performance is defined by:
- ASTM Standard D5250-92: This standard sets objective physical and dimensional properties (e.g., tensile strength, elongation, dimensions, freedom from holes).
- FDA 1000 ml. Water Fill Test: An objective test for pinhole integrity.
- Bio-compatibility testing: Objective tests for primary skin irritation and sensitization.
- 21 CFR requirements: Compliance with regulatory manufacturing and quality standards (e.g., GMPs).
8. The sample size for the training set
This question is not applicable. This is not an AI device that requires a training set.
9. How the ground truth for the training set was established
This question is not applicable. This is not an AI device that requires a training set.
{0}------------------------------------------------
AI COST
NO.1, RONG XING ROAD, CHE DUN ZHEN, SONG JIANG COUNTY, SHANGHAI, CHINA C/O: 11F, 201, NANKING E. RD., SEC. 3, TAIPEI, TAIWAN, R.O.C TEL/FAX: 886-2-25462480
OCT 11 1999
510(K) SUMMARY
This summary of 510(k) safety and effectiveness information is being submitted in accordance with the requirements of SMDA 1990 and 21 CFR § 807.92.
The assigned 510(k) number is: K992271
1.Submitter's Identification:
Ms. CHIAN-LI HUNG de LEE SHANGHAI COSMOS CORP. No. 1, Rong Xing Road, Che Dun Zhen, Song Jiang County
Date Summary Prepared: 25 May, 1999
2. Name of the Device:
·
SHANGHAI COSMOS CORP. Pre-powdered Vinyl Examination Gloves
3. Predicate Device Information:
Shanghai Super Gloves Co., Ltd. #K974151
4. Device Description:
Classified by FDA's General and Plastic Surgery Device Panel as Class I, 21 CFR 880.6250, Pre-powder Vinyl Patient Examination Glove, 80LYZ , powdered with Absorbable Dusting Powder, USP, Class III and meets all requirements of ASTM Standard D5250-92.
5.Intended Use:
A glove is worn on the hand of healthcare and similar personnel to prevent contamination between healthcare personnel and the patient's body, fluids, waste or environment.
{1}------------------------------------------------
XING ROAD. CHE DUN ZHEN. SONG JIANG COUNTY NO.1. C/O: 11F, 201, NANKING E. RD., SEC. 3, TATPET . TEL/FAX: 886-2-25462486
6. Comparison to Predicate devices:
SHANGHAI COSMOS CORP. Pre-powdered Vinyl Patient Examination Gloves, is substantially equivalent in safety and effectiveness to the Shanghai Super Gloves Co., Ltd. Prepowdered vinyl patient examination Gloves.
7. Discussion of Non-Clinical Tests Performed for Determination of Substantial Equivalence are as follows:
The standards used for SHANGHAI COSMOS CORP. Production are based on ASTM D-5250-92. All testing meets requirements for Physical and Dimensions Testing conducted on gloves, Inspection Level S-2, AQL 4.0.
The FDA 1000 ml. Water Fill Test was also conducted with samplings of AQL 2.5, Inspection Level S-4, meeting these requirements. Primary Skin Irritation and Skin Sensitization (allergic contact dermatitis) testing was conducted with results showing no primary skin irritant or sensitization reactions.
There are no special labeling claims and we do not claim our gloves as hypoallergenic on our labels.
SHANGHAI COSMOS CORP. Operates in compliance with FDA's GMPs.
8. Discussion of Clinical Tests Performed:
Not Applicable - There is not hypoallergenic claim.
9. Conclusions:
SHANGHAI COSMOS CORP. Vinyl Patient Examination Gloves conform fully to ASTM D-5250-92 standards as well as applicable 21 CFR references, and meets pinhole FDA requirements, bio-compatibility requirements and labeling claims as shown by data in Section 7. There are no safety/efficacy issues or new claims from the " substantial equivalence" products cited.
{2}------------------------------------------------
DEPARTMENT OF HEALTH & HUMAN SERVICES
Image /page/2/Picture/1 description: The image shows the logo for the Department of Health & Human Services - USA. The logo is a circular seal with the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" written around the top half of the circle. Inside the circle is an abstract image of three human profiles facing right, stacked on top of each other. The profiles are stylized and appear to be connected, forming a single, unified shape.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
OCT 1 1999
Shanghai Cosmos Corporation C/O Ms. Susan D. Goldstein-Falk Official Correspondent MDI Consultants, Incorporated 55 Northern Boulevard, Suite 410 Great Neck, New York 11021
Re : K992271 Pre-Powdered Vinyl Patient Examination Trade Name: Gloves Regulatory Class: I Product Code: LYZ Dated: July 2, 1999 Received: July 7, 1999
Dear Ms. Goldstein-Falk:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. ਬ substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical General requlation (21 CFR Part 820) and that, Devices: through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory In addition, FDA may publish further announcements action. concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531
{3}------------------------------------------------
Page 2 – Ms. Goldstein-Falk
through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4692. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR 807.97). Other qeneral information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address
"http://www.fda.gov/cdrh/dsma/dsmamain.html".
Sincerely yours
Timothy R. Ulatuski
Timothy A. Ulatowski Director Division of Dental, Infection Control, and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
ATTACHMENT A
Page ____ 1 __ of __ 1 __
510(k) Number (if known): K99 227/
SHANGHAI COSMOS CORP. Device Name: Pre-Powder Vinyl Patient Examination Gloves
Indications For Use:
A patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner.
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
| (Division Sign-Off) | |
| Division of Dental, Infection Control, and General Hospital Devices | |
| 510(k) Number | K992271 |
| Prescription Use(Per 21 CFR 801.109) | OR | Over-The-Counter Use X(Optional Format 1-2-96) |
|---|---|---|
| ------------------------------------------ | ---- | ----------------------------------------------------------- |
§ 880.6250 Non-powdered patient examination glove.
(a)
Identification. A non-powdered patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner. A non-powdered patient examination glove does not incorporate powder for purposes other than manufacturing. The final finished glove includes only residual powder from manufacturing.(b)
Classification. Class I (general controls). The device, when it is a finger cot, is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 880.9.