(81 days)
HB-35 DESENSITIZER USE WITH FLUORIDE FOR SENSITIVE TEETH
Not Found
The provided text is for a 510(k) summary for a dental desensitizer product and does not contain the information requested about acceptance criteria or a study proving device performance in the context of an AI/human-in-the-loop system.
The document discusses:
- A 510(k) summary for a dental desensitizer with fluoride (HB-35 Desensitizer with Fluoride).
- Claims of comparable efficacy to other market brands based on "third-party testing" (without providing details of the testing).
- Safety information related to its ingredients (Fluoride, Quals) and handling instructions.
- The FDA's decision of substantial equivalence to pre-amendment devices, allowing it to be marketed.
Therefore, I cannot populate the table or provide the requested details because the information is not present in the given text. This submission is for a traditional medical device, not an AI-powered diagnostic or assistive technology.
{0}------------------------------------------------
K973185
Dental Products Inc.
22 w
Medinah,
Image /page/0/Picture/4 description: The image shows the logo for the Digital Manufacturers of Nevada (DMN). The logo is in black and white and features the letters "DMN" in a bold, stylized font. Above the logo is the date "1 4 1997".
22 W 246 Sunnyside Rd. Medinah Minois 60157-9705, USA phone / fax: (630) 351-6284
510 ( K ) SUMMARY OF THE SAFETY AND EFFECTIVENESS . K 973185
The Safe Medical Devices Act of 1990 requires all persons submitting a premarket notification submission to include cither (1) a summary of the safety and effectiveness information in the pre-market notification submission upon which an equivalence determination could be based (510(k) summary), or (2) a statement that safety and effectiveness information will be made available to interested persons upon request (510(k) statement). Safety and offectiveness information, that is relevant to an assessment of substantial equivalence. The information could be descriptive information about the new and predicate device(s), or performance or clinical testing information,
In order to comply with the above requirements, we would like to state that our product's efficacy is comparable with other brands which are on the market.
Third party testing shows that the efficacy of our products is comparable or better than other brands which are on the market.
Regarding the safety of the product, please be advised that the product contains Fluoride, Quals and other ingredients which have been proven to be safe to be used in the dental industry for many years.. The product must be handled by a dentist professional according with the instructions and Matcrial Safety Data Sheet, wearing gloves, avoiding contact with skin, tissue gum and cycs using normal safe practices in a highly professional manner.
{1}------------------------------------------------
AMERICAN DENTAL PRODUCTS
More informations regarding the safety of the product are covered in the Material Safety Data Sheet for American Dental Products 113-35 Desensitizer with Fluoride, which copy please find enclosed.
Please be advised that our product American Dental Products HB-35 Desensitizer with Fluoride is not available on the market as of today, November 12, 1997, yet but we plan to market the product soon.
The descriptive information presented here satisfy the requirements of the SMDA of 1990.
Sincerely Yours,
George Nilitoz
George Nicolac. President and Official Correspondent AMERICAN DENTAL PRODUCT'S INC.
{2}------------------------------------------------
Image /page/2/Picture/1 description: The image is a black and white seal for the Department of Health & Human Services USA. The seal is circular with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" around the perimeter. In the center of the seal is an abstract image of a human face or profile.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Dr. George Nicolae ·President American Dental Products, Incorporated 22 W 246 Sunnyside Road Medinah, Illinois 60157-9705
- NOV 1 4 1997
Re: K973185 American Dental Products HB-35 Desensitizer Trade Name: With Fluoride Regulatory Class: II Product Code: KLE Dated: Auqust 20, 1997 Received: Auqust 25, 1997
Dear Dr. Nicolae:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions The general controls provisions of the Act of the Act. include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major requlations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP requlation may result in regulatory In addition, FDA may publish further announcements action. concerning your device in the Federal Reqister. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531
{3}------------------------------------------------
Page 2 - Dr. Nicolae
through 542 of the Act for devices under the Electronic enrough State on the notrol provisions, or other Federal laws or requlations.
This letter will allow you to begin marketing your device as info reed in your 510 (k) premarket notification. The FDA asboing of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4618. Additionally, for questions on compriation and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to
premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
Timothy A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
ি ০০০২
Page ી
510(k) Number (if kn >wn):____________________________________________________________________________________________________________________________________________________ - K 973185 Device Name: _ HB-31 DE SE N S T T ZE WITH Indications For Use:
HB-35 DESENSITIZER U SE WITH FLUORIDE FOR SENSITIVE
(PLEASE DO NOT WR TE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
(Division Sign-Off)
Division of Dental, Infection Control,
and General Hospital Devices
510(k) Number 1973185
Prescription Use
(Per 21 CFR 801.109)
OR
Over-The-Counter Use
(Optional Formal 1-2-96)
§ 872.3200 Resin tooth bonding agent.
(a)
Identification. A resin tooth bonding agent is a device material, such as methylmethacrylate, intended to be painted on the interior of a prepared cavity of a tooth to improve retention of a restoration, such as a filling.(b)
Classification. Class II.