Search Results

Medentika Custom Abutments AS (Angulated Screw Channel) are intended for use with dental implants as a support for single or multiple tooth protheses in the maxilla or mandible of a partially or fully edentulous patient. Medentika Custom Abutments AS are intended for use with the Straumann® CARES® System. All digitally designed Medentika Custom Abutments AS are intended to be manufactured at a Straumann® validated milling center. The final patient matched form is a Custom Abutment AS.

Medentika abutments for the Nobel Biocare Nobel Active® 3.0 mm, Dentsply Sirona Astra Tech OsseoSpeed EV® 3.0 mm and TX® 3.0 mm, and Straumann Bone Level 2.9 implant bodies are indicated for maxillary lateral and mandibular central/lateral incisors only.

The Custom Abutments (previously named MedentiCAD and PreFace abutments) can be used in combination with cemented prosthetics, e.g., crowns and superstructures, to reconstruct the function and esthetics of lost teeth. The Custom Abutment is a one-piece abutment, which is a customized abutment that is digitally designed by the customer with Straumann® CARES® Visual and can be only milled and ordered from the Straumann validated milling center. The abutments have an implant-specific connection interface for the respective compatible implant. The previously cleared Custom Abutments feature a straight screw channel for the abutment screw which fixes the abutment to the respective implant. The purpose of this submission is to add Custom Abutments AS (Angulated Screw Channel) to the Medentika Custom Abutment Portfolio. The subject Medentika Custom Abutments AS can be designed and manufactured with an angled screw channel (as opposed to the predicate straight screw-channel), so that the screw-exit is located in a favorable position (away from the incisal/occlusal edge and tooth cusps) for esthetic and functional results. The screw channel can be angulated to allow screwdriver access at an angle up to 25°.

Each of the abutment to implant connection geometries (in terms of Series and implant diameter) currently exists for the existing marketed Medentika Custom Abutments (with straight screw channel). No new compatible implant is added, in terms of series, implant diameter, and implant platform diameter within this submission.

N/A

Ask a specific question about this device