Search Results
Found 1 results
510(k) Data Aggregation
(109 days)
The Medical Disposable Face Mask is intended to be worn to protect both the patient and healthcare personnel from transfer of microorganisms, body fluids and particulate material. The face mask is intended for use in infection control practices to reduce the potential exposure to blood and body fluids. This is a single use, disposable device, provided nonsterile.
The Medical Disposable Face Mask is blue color, single use, three-layer, flat-pleated mask with nose piece and ear loop. The blue colorant is polypropylene (PP) masterbatch. The Medical Face Mask is manufactured with three layers, the inner and outer layers are made of spunbond polypropylene, and the middle layer is made of melt blown polypropylene filter. The ear loops are held in place over the users' mouth and nose by two elastic ear loops welded to the facemask. The elastic ear loops are made of polyester and spandex, not made with natural rubber latex. The nose piece in the layers of facemask is to allow the user to fit the facemask around their nose, which is made of malleable aluminum with polypropylene (PP) covering. Users can adjust the nose piece according to the shape of the bridge of the nose, and fix the mask on the bridge of the nose to prevent the mask from falling off. The medical face masks are available in two size specifications, 17.5×9.5cm, 14.5×9.5cm. The medical face masks are sold non-sterile and are intended to be single use, disposable devices.
The provided document is a 510(k) summary for a medical device called "Medical Disposable Face Masks." It is a regulatory submission to the FDA demonstrating substantial equivalence to a legally marketed predicate device. This document does not contain information about an AI/ML-driven medical device, but rather a standard medical device (face masks).
Therefore, the specific information requested about acceptance criteria, study design for AI/ML performance, ground truth establishment, expert adjudication, MRMC studies, or training sets is not applicable to this document. The document describes non-clinical performance testing for the physical properties and biological compatibility of face masks.
However, I can extract the acceptance criteria and reported performance for the face mask product, as presented in the document:
1. Table of Acceptance Criteria and Reported Device Performance (for Face Masks)
| Test Standard | Performance Criteria (Acceptance Criteria) | Reported Device Performance |
|---|---|---|
| Fluid Resistance ASTM F1862 | 32 out of 32 per lot pass at 80 mmHg, 3 non-consecutive lots tested | 32 out of 32 per lot pass at 80 mmHg, 3 non-consecutive lots tested |
| Particulate Filtration Efficiency ASTM F2299 | ≥ 95% | ≥ 95% |
| Bacterial Filtration Efficiency ASTM F2101 | ≥ 95% | ≥ 95% |
| Differential Pressure (Delta P) EN14683 Annex C |
Ask a specific question about this device
Page 1 of 1