Search Filters

Search Results

Found 2 results

510(k) Data Aggregation

    K Number
    K162945
    Manufacturer
    Date Cleared
    2017-04-28

    (189 days)

    Product Code
    Regulation Number
    880.2805
    Reference & Predicate Devices
    N/A
    Why did this record match?
    Device Name :

    VERIFY ASSERT STEAM Process Challenge Device

    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    The VERIFY™ Assert™ STEAM Process Challenge Device (PCD) is used for qualification, routine microbial monitoring, and load monitoring of steam sterilizers.

    The validated steam sterilization cycles include:

    • 270°F (132°C) 4-minute dynamic air removal
    • 275°F (135°C) 3-minute dynamic air removal
    Device Description

    Not Found

    AI/ML Overview

    This document is a 510(k) clearance letter for a medical device (VERIFY Assert STEAM Process Challenge Device) and an "Indications for Use" statement. It does not contain information about acceptance criteria, study details, or device performance against those criteria. Therefore, I cannot extract the requested information from this document.

    Ask a Question

    Ask a specific question about this device

    K Number
    K170070
    Manufacturer
    Date Cleared
    2017-04-28

    (109 days)

    Product Code
    Regulation Number
    880.2800
    Reference & Predicate Devices
    Why did this record match?
    Device Name :

    VERIFY ASSERT STEAM Process Challenge Device for Gravity Cycles

    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    The VERIFY™ ASSERT™ STEAM Process Challenge Device for Gravity Cycles is used for qualification, routine microbial monitoring, and cycle monitoring of steam sterilizers.

    The validated steam sterilization cycles include:

    • · 250°F (121°C) 30-minute gravity
    • · 270°F (132°C) 15-minute gravity

    The VERIFY Assert Self-Contained Indicator within the Process challenge device must be used with the VERIFY Incubator for Assert Self Contained Biological Indicators. When used in conjunction with the VERIFY Incubator for Assert Self Contained Biological Indicators, the VERIFY Assert Self-Contained Indicator within the Process challenge device provides a fluorescent result within 40 minutes.

    Device Description

    The VERIFY"" Assert" |STEAM Process Challenge Device for Gravity Cycles (Gravity PCD), contains a VERIFY Assert Self-Contained Biological Indicator (SCBI) and a steam chemical integrator, sealed within a plastic tray with foil cover. The tray has a molded channel which serves as the tortuous pathway for air removal/steam penetration during steam sterilization. The PCD is designed and validated to be equivalent to the standard 16-towel test pack described in ANSI/AAMI ST79.

    AI/ML Overview

    The STERIS VERIFY™ Assert™ STEAM Process Challenge Device for Gravity Cycles does not involve AI or human readers, therefore, many of the requested categories are not applicable.

    Here's a summary of the acceptance criteria and study information for this device:

    1. Table of Acceptance Criteria and Reported Device Performance:

    TestAcceptance CriteriaReported Device Performance
    Simulated UsePerformance of the BI in the PCD is equivalent to the performance of the BI in the AAMI reference pack in their respective sterilization processes. Performance of the chemical integrator in the PCD is equivalent to the performance of the chemical integrator in AAMI reference pack in their respective processes. PCD provides an equivalent or greater challenge than the AAMI standardized test pack.PASS
    BI in pack vs BI outside packPCD provides a greater challenge to the process than the BI itself.PASS
    CI in pack vs CI outside packPCD provides a greater challenge to the process than the integrator by itself.PASS
    Chemical IntegratorChemical integrator does not reach endpoint before BI is inactivated.PASS

    2. Sample size used for the test set and the data provenance:

    The document does not specify the exact sample sizes used for each test. However, it indicates "Simulated use testing was done side-by-side with the predicate device". The data provenance is derived from these non-clinical tests conducted by STERIS Corporation. The data is prospective as it describes testing specifically designed for the device's clearance.

    3. Number of experts used to establish the ground truth for the test set and the qualifications of those experts:

    Not applicable. This device is a sterilization process challenge device, not a diagnostic or AI-powered medical device requiring expert interpretation of results. The "ground truth" is based on the inactivation of biological indicators and the chemical changes in integrators under controlled sterilization conditions, in comparison to an established standard (AAMI reference pack).

    4. Adjudication method (e.g. 2+1, 3+1, none) for the test set:

    Not applicable. The tests involve quantifiable outcomes (e.g., biological indicator inactivation, chemical integrator endpoint attainment) rather than subjective expert adjudication.

    5. If a multi-reader multi-case (MRMC) comparative effectiveness study was done, If so, what was the effect size of how much human readers improve with AI vs without AI assistance:

    Not applicable. This is not an AI-powered device or a device involving human readers.

    6. If a standalone (i.e. algorithm only without human-in-the loop performance) was done:

    The device's performance is inherently "standalone" in the sense that it functions to indicate sterilization efficacy without human interpretation of complex data or algorithms. Its results (fluorescent or non-fluorescent, chemical change) are read by an automated incubator/reader for the BI and visually for the chemical integrator.

    7. The type of ground truth used (expert consensus, pathology, outcomes data, etc):

    The ground truth is established based on:

    • Biological Inactivation: The complete inactivation of Geobacillus stearothermophilus spores within the biological indicator, as confirmed by the absence of fluorescence after incubation. This aligns with standard microbiological principles for sterilization efficacy.
    • Chemical Integrator Response: The visible change in the chemical integrator, indicating exposure to specific sterilization parameters (time, temperature, steam).
    • Comparison to AAMI Reference Pack: The performance of the VERIFY™ Assert™ PCD is compared against the "standard 16-towel test pack described in ANSI/AAMI ST79," which serves as a recognized gold standard for validating sterilization processes.

    Essentially, the "ground truth" is a set of established physical and biological parameters for effective steam sterilization.

    8. The sample size for the training set:

    Not applicable. This device does not use machine learning or require a training set.

    9. How the ground truth for the training set was established:

    Not applicable. No training set was used.

    Ask a Question

    Ask a specific question about this device

    Page 1 of 1