Search Results

The T3® Pro Implants are intended for surgical placement in the upper or lower jaw to provide a means for prosthetic attachment in single tooth restorations and in partially or fully edentulous spans with multiple single teeth utilizing delayed loading, or with a terminal or intermediary abutment for fixed or removable bridgework, and to retain overdentures.

The T3® Pro Implants may also utilize immediate loading for these indications. The T3® Pro Implants are intended for immediate function on single tooth and/or multiple tooth applications when good primary stability is achieved, with appropriate occlusal loading, in order to restore chewing function.

The T3® Pro Implants with the new ZimVie Implant Packaging System. The material and design of the subject device is identical to the primary predicate device T3® Pro Implants cleared in K213672.

The ZimVie Implant Packaging System configuration, similarly to the primary predicate device, consists of a titanium sleeve that is inserted into a polypropylene inner tray, covered with a Tyvek lid and heat-sealed. This assembly is then placed in a heat-sealed outer tray, covered with a Tyvek® lid. The outer tray is placed inside a cardboard box, and gamma sterilized. The new ZimVie Packaging System has been standardized to align the packaging across all ZimVie implant families. The subject device in the new ZimVie Packaging System has a shelf-life of two (2) years.

The provided FDA 510(k) clearance letter and associated documentation for the "T3 Pro Implants- ZimVie Packaging System" (K251660) do not describe acceptance criteria or a study proving the device meets those criteria in the context of an AI/human reader performance study.

Instead, this submission is for a medical device (endosseous dental implant) and its new packaging system. The "performance data" section explicitly states that no clinical data was included in the submission for the substantial equivalence determination. The focus of the provided document is to demonstrate equivalence to a previously cleared predicate device for the dental implant itself, with the primary change being the packaging system.

Therefore, I cannot fulfill your request to create a table of acceptance criteria and reported device performance related to an AI-assisted or standalone AI system, nor can I provide details on sample size, expert adjudication, MRMC studies, or ground truth establishment, as these concepts are not discussed or relevant to the provided documentation for this specific 510(k) clearance.

The information provided describes non-clinical performance data related to the physical device and its packaging:

• Sterilization validation: Gamma irradiation sterilization to a sterility assurance level of 10^-6 according to ISO 13004 and ISO 11137.
• Aging studies: Demonstrating a shelf life of two (2) years for the implants, with packaging sterile barrier testing per ASTM F1980.
• Packaging studies: Simulated distribution and environmental conditioning per ISTA 3A and ASTM D4169.
• Biological evaluation: Leveraged from the primary predicate device, demonstrating no increased risks regarding biocompatibility. The material is Commercially Pure Titanium conforming to ASTM F67.
• MR Safety testing: Conducted according to ASTM F2503-13 on the primary predicate device (identical to the subject device) for MR Conditional determination.
• Bacterial Endotoxin Testing: Routinely performed using LAL assay in accordance with ISO 11737-3.

The acceptance criteria for this submission would primarily revolve around demonstrating that the new packaging system maintains the sterility, integrity, and safety of the dental implant for its stated shelf life, and that the dental implant itself remains identical to the previously cleared predicate device in all other aspects (materials, design, intended use, operating principle).

In summary, your request pertains to an AI/Software as a Medical Device (SaMD) study, while the provided document describes the 510(k) clearance process for a physical dental implant device and its new packaging.

Ask a specific question about this device

The T3 Pro Implants are intended for surgical placement in the upper or lower jaw to provide a means for prosthetic attachment in single tooth restorations and in partially or fully edentulous spans with multiple single teeth utilizing delayed loading, or with a terminal or intermediary abutment for fixed or removable bridgework, and to retain overdentures.

The T3 Pro Implants may also utilize immediate loading for these indications. The T3 Pro Implants are intended for immediate function on single tooth and/or multiple tooth applications when good primary stability is achieved, with appropriate occlusal loading, in order to restore chewing function.

The T3 Pro Implants are basic screw-type designs available in tapered body geometry. The devices are manufactured from Commercially Pure Titanium (ASTM F67) and feature a roughened apex and traditional OSSEOTITE® coronal surface. The device is packaged in a Titanium sleeve that is inserted into a polypropylene inner tray, covered with a Tyvek lid and heat-sealed. This assembly is then placed inside a larger polyethylene thermoformed outer tray, covered with a Tyvek lid and heat-sealed. The outer tray is packaged inside a box. The device is sold sterile. The shelf life of the T3 Pro Implants is 5 years and they are intended for single use only. The device is sterilized using gamma irradiation method. The implants are available in various platform options and feature an internal hex connection for mating with associated Biomet 3i internal connection restorative components. The implants are offered in a variety of diameters and lengths to accommodate varying patient anatomy.

The provided document is a 510(k) summary for a medical device (T3 Pro Implants) and does not contain information regarding software or AI performance.

Therefore, I cannot provide an answer addressing the acceptance criteria and study proving device performance for AI/software, as the document does not pertain to such a device.

The document discusses the substantial equivalence of the T3 Pro Implants to predicate devices based on non-clinical testing rather than AI/software performance evaluations.

Ask a specific question about this device