LogoFDA 510(k) Search
Search Filters

Search Results

Found 1 results

510(k) Data Aggregation

    K Number
    K152428
    Device Name
    SensiCare PI Surgical Gloves
    Manufacturer
    MEDLINE INDUSTRIES, INC.
    Date Cleared
    2016-03-31

    (218 days)

    Product Code
    KGO,LZC
    Regulation Number
    878.4460
    Type
    Traditional
    Panel
    General Hospital
    Reference & Predicate Devices
    K110272
    Why did this record match?
    Device Name :

    SensiCare PI Surgical Gloves

    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    The SensiCare PI surgeon's glove is a disposable device made of synthetic rubber intended to be worn by operating room personnel to protect a surgical wound from contamination. In addition, these gloves were tested for use with chemotherapy drugs in accordance with ASTM D6978 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drugs.

    Device Description

    The SensiCare PI Surgical Gloves are disposable powder-free surgical gloves that are intended to be worn by surgeons and/or operating room personnel to protect a surgical wound from contamination. The gloves are made with polyisoprene and are cream in color. The SensiCare PI Surgical Gloves are available in a smooth grip and are constructed with a beaded cuff. The gloves have been tested for use with chemotherapy drugs per ASTM D6978.

    AI/ML Overview

    This document is a 510(k) Premarket Notification for the SensiCare PI Surgical Gloves. It outlines the device's characteristics, intended use, and a comparison to a predicate device. The primary performance testing described relates to the glove's resistance to chemotherapy drugs and its physical properties.

    Here's an analysis of the acceptance criteria and study information provided:

    1. Table of Acceptance Criteria and Reported Device Performance

    The acceptance criteria for the SensiCare PI Surgical Gloves are based on compliance with specific ASTM (American Society for Testing and Materials) and ISO (International Organization for Standardization) standards, as well as FDA regulations.

    Acceptance Criteria CategoryStandard / ReferenceAcceptance CriterionReported Device Performance
    Chemotherapy Drug Permeation (Breakthrough Detection Time)ASTM D6978Not explicitly stated as a minimum "acceptance criteria" but rather as a performance benchmark compared to the predicate and intended use guidance (e.g., minimum breakthrough time of less than 30 minutes for certain drugs). The relevant criteria would be meeting or exceeding the performance of the predicate device.Carmustine (BCNU) 3.3 mg/ml (3,300 ppm): 10.1 min. (10.1, 10.1, 10.1)
    Cisplatin 1.0 mg/ml (1,000 ppm): 240 min.
    Cyclophosphamide (Cytoxan) 20 mg/ml (20,000 ppm): 240 min.
    Cytarabine 100 mg/ml (100,000 ppm): 240 min.
    Dacarbazine (DTIC) 10.0 mg/ml (10,000 ppm): 240 min.
    Doxorubicin Hydrochloride 2.0 mg/ml (2,000 ppm): 240 min.
    Etoposide (Toposar) 20.0 mg/ml (20,000 ppm): 240 min.
    Fluorouracil 50.0 mg/ml (50,000 ppm): 240 min.
    Ifosfamide 50.0 mg/ml (50,000 ppm): 240 min.
    Methotrexate 25 mg/ml (25,000 ppm): 240 min.
    Mitomycin C 0.5 mg/ml (500 ppm): 240 min.
    Mitoxantrone 2.0 mg/ml (2,000 ppm): 240 min.
    Paclitaxel (Taxol) 6.0 mg/ml (6,000 ppm): 240 min.
    Thiotepa 10.0 mg/ml (10,000 ppm): 11.6 min. (20.2, 21.5, 11.6)
    Vincristine Sulfate 1.0 mg/ml (1,000 ppm): 240 min.
    (Note: Carmustine and Thiotepa had breakthrough times less than 30 minutes, necessitating a warning in the intended use statement.)
    Dimensions - LengthASTM D3577270mm min.Meets ASTM D 3577 (270mm min.)
    Dimensions - WidthASTM D35775 ½ - 70±6mm, 6 - 76±6mm, 6 ½ - 83±6mm, 7 - 89±6mm, 7 ½ - 95±6mm, 8 - 102±6mm, 8 ½ - 108±6mm, 9 - 114±6mmMeets ASTM D 3577
    Dimensions – Finger ThicknessASTM D35770.10mm min.Meets ASTM D3577 (0.10mm min.)
    Dimensions – Palm ThicknessASTM D35770.10mm min.Meets ASTM D3577 (0.10mm min.)
    Dimension – Cuff ThicknessASTM D35770.10mm min.Meets ASTM D3577 (0.10mm min.)
    Physical Properties (Before Aging) - Tensile StrengthASTM D357717 MPa min.Meets ASTM D3577 (17 MPa min.)
    Physical Properties (Before Aging) - Ultimate ElongationASTM D3577650% min.Meets ASTM D3577 (650% min.)
    Physical Properties (Before Aging) - Stress at 500% ElongationASTM D35777.0 MPa min.Meets ASTM D3577 (7.0 MPa min.)
    Physical Properties (After Aging) - Tensile StrengthASTM D357712 MPa min.Meets ASTM D3577 (12 MPa min.)
    Physical Properties (After Aging) - Ultimate ElongationASTM D3577490% min.Meets ASTM D3577 (490% min.)
    Freedom from Holes21 CFR 800.20 & ASTM D3577 (tested per ASTM D5151)Inspection Level 1, AQL 1.5Meets 21 CFR 800.20 and ASTM D3577 when tested in accordance with ASTM D5151 (Inspection Level 1, AQL 1.5)
    Residual PowderASTM D3577
    Ask a Question

    Ask a specific question about this device

    Page 1 of 1