Search Results
Found 2 results
510(k) Data Aggregation
(83 days)
PLEXUR M
PLEXUR M is intended for use in filling bony voids or gaps of the skeletal system (i.e. extremities and pelvis) that are not intrinsic to the stability of the bony structure. These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. In addition, Plexur M may be used in conjunction with autograft as a bone void filler in the spine. PLEXUR M is resorbed/remodeled and is replaced by host bone during the healing process.
PLEXUR M is a bone void filler product that contains, as a key constituent, processed human bone particles that are mixed with resorbable/biodegradeable non-tissue components. It is intended to be heated at the time of use, whereupon it becomes moldable, thus allowing the surgeon to pack it into the implant site or shape it to accommodate variations in the geometry and size of the particular implant site. As it cools down, the PLEXUR M returns to its normal hardened/rigid state and remains this way at body temperature. The surgeon may further shape, cut or grind PLEXUR M in the hardened state using conventional surgical instruments. PLEXUR M is packaged/provided for single use in a sterile form. PLEXUR M is resorbed/remodeled and is replaced by host bone during the healing process. A compact, single use heater is available as a means to heat the PLEXUR M at the time of use to make it pliable. Alternatively, PLEXUR M may be heated in a water bath.
The provided document, K081227, is a 510(k) summary for the PLEXUR M bone void filler. This type of submission focuses on demonstrating substantial equivalence to a legally marketed predicate device, rather than establishing robust performance criteria through comprehensive clinical trials as might be seen for novel devices.
Therefore, the "acceptance criteria" and "device performance" are primarily demonstrated through a comparison to predicate devices and animal study results. There are no explicit quantitative acceptance criteria or detailed human-based performance metrics in this summary.
Here's an analysis based on the provided text, addressing your points:
1. Table of Acceptance Criteria and Reported Device Performance
| Acceptance Criterion (Implicit) | Reported Device Performance |
|---|---|
| Safety: Biocompatibility and absence of adverse reactions | Implied by substantial equivalence to predicate devices and the processing steps for viral inactivation. "PLEXUR M is packaged/provided for single use in a sterile form." "In the production of PLEXUR M, the allograft bone is subjected to processing steps that have been shown to inactivate viruses, including HIV, hepatitis B and C and CMV." |
| Effectiveness: Support of bone in-growth and new bone formation | "The results of studies in animal showed that PLEXUR M supports bone in-growth and new bone formation to an extent at a rate at least comparable to predicate devices." |
| Bioremodeling: Resorption and replacement by host bone | "PLEXUR M is resorbed/remodeled and is replaced by host bone during the healing process." (Stated as an intended mechanism of action, implicitly supported by substantial equivalence and animal studies). |
| Functional Equivalence: Handling and mechanical properties | "PLEXUR M is substantially equivalent to one or more of the predicate devices with respect to materials." "PLEXUR M contains human allograft bone tissue, as does one or more of the predicate devices." "PLEXUR M also contains resorbable polymer of the same type as those in one or more of the predicate devices." "Also, like one or more of the predicate devices, PLEXUR M is provided sterile in various sizes that, upon heating (using a compact, single use sterile heater to be marketed by Osteotech), it is made moldable and can be cut or shaped by the user into various shapes or sizes. It may be further shaped by the surgeon in its hardened state using conventional surgical instruments." This implies similar handling characteristics and the ability to fill voids. |
2. Sample Size Used for the Test Set and Data Provenance
- Sample Size for Test Set: Not specified. The document refers to "studies in animal" without providing the number of animals or specific details of the study design.
- Data Provenance: The studies were conducted in "animal," indicating an animal model. The country of origin is not specified. The study is described retrospectively in the 510(k) summary (i.e., the results are being reported).
3. Number of Experts Used to Establish the Ground Truth for the Test Set and Qualifications of Those Experts
Not applicable. This was an animal study focused on histological and biological endpoints, not human expert interpretation of images for diagnosis.
4. Adjudication Method for the Test Set
Not applicable. As described above, it was an animal study, not a study requiring human adjudication for diagnostic ground truth.
5. If a Multi-Reader Multi-Case (MRMC) Comparative Effectiveness Study Was Done
No. This type of study (MRMC for human readers with and without AI assistance) is not applicable to an animal study for a bone void filler product demonstrating substantial equivalence.
6. If a Standalone (i.e., algorithm only without human-in-the-loop performance) Was Done
Yes, in a way. The performance data presented refers to the inherent biological and structural properties of the PLEXUR M device itself in an animal model, without direct human intervention in the assessment process, beyond standard pathological evaluations. It's not an "algorithm-only" study in the context of AI, but rather an evaluation of the device's biological function.
7. The Type of Ground Truth Used
- Animal Study for Biological Response: The "ground truth" was established through direct observation and histological analysis of bone in-growth and new bone formation in the animal model. This is akin to pathology/histology and direct biological observation.
8. The Sample Size for the Training Set
Not applicable. This product is a medical device (bone void filler), not an AI algorithm. There is no concept of a "training set" in the context of its development as described here.
9. How the Ground Truth for the Training Set Was Established
Not applicable, as there is no training set for this device.
Summary of the Study Proving Acceptance:
The study referenced is an animal study that demonstrated the PLEXUR M device supports bone in-growth and new bone formation. The acceptance criteria were implicitly set by demonstrating that this biological performance was "at least comparable to predicate devices." The data provenance is an unspecified animal model, and the ground truth was established by direct observation and analysis of biological response (e.g., histology). No human-reader or AI-specific studies were conducted or reported in this 510(k) summary. The primary method of establishing "acceptance" for a 510(k) device like this is through the demonstration of substantial equivalence to previously cleared predicate devices, supported by non-clinical (e.g., animal, bench) or, if necessary, clinical data.
Ask a specific question about this device
(90 days)
PLEXUR M
PLEXUR M is intended for use in filling bony voids or gaps of the skeletal system (i.e., extremities, pelvis) that are not intrinsic to the stability of the bony structure. These defects may be surgically created osseous defects or osseous defects created from traumatic injury to the bone. PLEXUR M is resorbed/remodeled and is replaced by host bone during the healing process.
PLEXUR M is a bone void filler product that contains, as a key constituent, processed human bone particles that are mixed with resorbable/biodegradeable non-tissue components. It is intended to be heated at the time of use, whereupon it becomes moldable, thus allowing the surgeon to pack it into the implant site or shape it to accommodate variations in the geometry and size of the particular implant site. As it cools down, the PLEXUR M returns to its normal hardened/rigid state and remains this way at body temperature. The surgeon may further shape, cut or grind PLEXUR M in the hardened state using conventional surgical instruments. PLEXUR M is packaged/provided for single use in a sterile form. PLEXUR M is resorbed/remodeled and is replaced by host bone during the healing process. A compact, single use heater is available as a means to heat the PLEXUR M at the time of use to make it pliable. Osteotech is seeking approval of this single use heater as part of this 510(k) submission. Alternatively, PLEXUR M may be heated in a water bath.
The provided document is a 510(k) premarket notification for a medical device called PLEXUR M, a bone void filler. It details the device description, intended use, and its substantial equivalence to predicate devices, but it does not contain information about acceptance criteria or a study proving the device meets specific performance metrics in the way a diagnostic AI/ML device would.
The "Performance Data" section states: "The results of studies in animals showed that PLEXUR M supports bone ingrowth and new bone formation." This is a general statement about the biological performance of the device rather than a quantitative assessment against predefined acceptance criteria.
Therefore, the requested information cannot be fully provided based on the given text.
Here's an attempt to answer based on the available information, with many points indicating that the information is not present in the document:
Acceptance Criteria and Device Performance
1. Table of Acceptance Criteria and Reported Device Performance
| Acceptance Criteria | Reported Device Performance |
|---|---|
| Not specified in the document for PLEXUR M as a diagnostic or analytical device. | "results of studies in animals showed that PLEXUR M supports bone ingrowth and new bone formation." |
| No quantitative performance metrics (e.g., sensitivity, specificity, accuracy, precision, etc.) are provided for human use. | No quantitative performance data for human use provided. |
2. Sample Size Used for the Test Set and Data Provenance
- Test Set Sample Size: Not applicable/Not specified. The document refers to "studies in animals" but does not give a sample size, and it's for biological performance, not a diagnostic test set.
- Data Provenance: Studies were conducted "in animals." No country of origin is specified. The studies appear to be for biological evaluation, not clinical efficacy in humans as a "test set" in the context of AI/ML evaluation. Such studies are typically prospective.
3. Number of Experts Used to Establish the Ground Truth for the Test Set and Qualifications
- Not applicable. The "ground truth" for bone ingrowth and new bone formation in animal studies would typically be established through histological examination or other biological assessments by veterinary pathologists or other relevant scientists, but this information is not detailed.
4. Adjudication Method for the Test Set
- Not applicable. This concept is relevant for human-read data or diagnostic interpretations, which is not the focus of the performance data presented here.
5. If a Multi-Reader Multi-Case (MRMC) Comparative Effectiveness Study was Done
- No. This document does not mention any MRMC study. The device is a bone void filler, not an imaging or diagnostic device that typically undergoes MRMC studies.
6. If a Standalone (i.e. algorithm only without human-in-the-loop performance) was Done
- No. The device is a physical bone void filler, not an algorithm or AI/ML system.
7. The Type of Ground Truth Used
- The "ground truth" for the animal studies would be related to biological outcomes such as histological evidence of bone ingrowth and new bone formation.
8. The Sample Size for the Training Set
- Not applicable. This device is not an AI/ML algorithm requiring a training set.
9. How the Ground Truth for the Training Set was Established
- Not applicable. This device is not an AI/ML algorithm requiring a training set.
Summary of what the document does provide:
- Device Name: PLEXUR M
- Intended Use: For filling bony voids or gaps of the skeletal system (extremities, pelvis) that are not intrinsic to the stability of the bony structure.
- Device Description: Contains processed human bone particles mixed with resorbable/biodegradable non-tissue components, becomes moldable when heated, then hardens.
- Performance Data (limited): Animal studies showed it "supports bone ingrowth and new bone formation."
- Viral Inactivation: Processing steps for allograft bone inactivate viruses (HIV, hepatitis B and C, CMV).
- Substantial Equivalence: Based on materials (human allograft bone, resorbable polymer) and heat-moldable characteristics compared to predicate devices.
Ask a specific question about this device
Page 1 of 1