LogoFDA 510(k) Search
Search Filters

Search Results

Found 1 results

510(k) Data Aggregation

    K Number
    K101568
    Device Name
    MODEL SB100II FINGER PULSE OXIMETER
    Manufacturer
    ATLANTEAN
    Date Cleared
    2010-09-20

    (110 days)

    Product Code
    DQA
    Regulation Number
    870.2700
    Type
    Traditional
    Panel
    Anesthesiology
    Reference & Predicate Devices
    K082641,K013171
    Predicate For
    N/A
    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    The SB100II Fingertip Pulse Oximeter is a non-invasive device intended for the spot-checking of oxygen saturation of arterial hemoglobin (SpO2) and the pulse rate of adult and pediatric patients in home and hospital environments (including clinical use in internist/surgery, anesthesia, intensive care etc.). The SB100II is not intended for continuous monitoring.

    Device Description

    The SB10011 pulse oximeter is an instrument for photoelectrically determining the oxygenation of blood in a translucent part of the body, in this case the finger. This SB1001 contains the electronics to interface to the integral sensor. This sensor consists of a light emitting diode and a photoelectric cell placed on either side of the finger. Red and infrared light are transmitted through oxyhemoglobin and are sensed in the photoelectric cell. The red and infrared light is absorbed in different amounts depending on the oxygenation of the blood. The SB10011 has the ability to determine both the percent of saturated hemoglobin and the pulse rate. It performs these functions on adult and pediatric patient populations. It is designed for spot checking both the SpO2 and Pulse rate information. To perform this, the SB100Il display digital values for both the SpO2 and Pulse. Pulse amplitude is displayed graphically by means of a vertical bar, which elevates in synch with the pulse cycle. The SB1001 is powered by two "AAA" batteries. The wavelength of red LED is 660nm and Infrared LED is 905/880nm with maximum optical output power of 4mW. The device incorporates a battery state indicator and provides a visual indication of low battery.

    AI/ML Overview

    Here's a breakdown of the acceptance criteria and the study information for the SB100II Finger Pulse Oximeter, based on the provided documents:

    Acceptance Criteria and Device Performance

    1. Table of Acceptance Criteria and Reported Device Performance

    AttributeAcceptance Criteria (Predicate or Regulatory Standard)Reported Device Performance (SB100II)
    SpO2 Accuracy+/-2% 70-99% (from K082641, K013171)+/-3% 70-99%
    Pulse Accuracy±2% or 2 bpm whichever is greater (from K082641, K013171)+/-3 bpm
    SpO2 Range35-99% (from K082641)35-99%
    SpO2 Resolution1%1%
    Pulse Range30-250 bpm (from K082641)30-250 bpm
    Pulse Resolution1 bpm1 bpm
    Standards ComplianceIEC 60601-1, IEC 60601-1-2, ISO 9919Meets current revisions of IEC 60601-1:1988+A1+A2, IEC 60601-1-2:2001+A1, and ISO 9919:2005
    Ingress ProtectionMeets FDA guidance for protection against ingress of water (not specified in predicates)IPX1 and ISO 9919 Clause 44
    Electrical SafetyUnknown (for predicates)Type BF

    Discussion of Performance vs. Criteria:

    • SpO2 Accuracy: The SB100II reports an accuracy of +/-3% in the 70-99% range. The document states this is "Similar, actual Arms 2.5 Meets FDA guidance for non-motion ≤ 3.0 % Meets ISO 9919 for non-motion
    Ask a Question

    Ask a specific question about this device

    Page 1 of 1