Search Filters

Search Results

Found 2 results

510(k) Data Aggregation

    K Number
    K971583
    Date Cleared
    1997-06-30

    (61 days)

    Product Code
    Regulation Number
    886.3320
    Reference & Predicate Devices
    N/A
    Why did this record match?
    Device Name :

    MEDPOR OCULAR SCREW AND ACCEOSSORIES

    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    The MCP® is indicated for patients with MEDPOR® Ocular Implants, who desire improved prosthetic eye motility via direct coupling of the implant to the prosthetic eye. Primary placement of the-MGP® may occur during the initial … reconstruction procedure, following attachment of the extraocular muscles to the ocular implant but before closing the Tenon's capsule and the conjunctiva layer. Secondary placement of the MCP may occur typically 3-6 months post enucleation after the ocular implant has become vascularized.

    Device Description

    Titanium Screw

    The screw is intended for single patient use. The Titanium Screw is composed of #6A1-4V ELI titanium which meets ASTM Standard F136-92. Three head sizes of 4.6 mm, 3.5 mm, and 2.5 mm will be available. The screw head contains a square hole to mate with the driver. The screw shaft and thread pattern is the same for all three head sizes.
    The ocular screw is supplied non-sterile.

    Screwdriver

    The Screwdriver is manufactured of 316 stainless steel. The screwdriver tip is designed to mate with the square hole in the head of the titanium screw. The screwdriver is supplied non-sterile and is intended to be re-usable.

    Drill Bit

    The Drill Bit is a 1 mm diameter, 316 stainless steel, twist drill bit to be used for drilling a pilot hole for the screw. The Drill Bit is supplied non-sterile, and is intended to be re-usable.

    AI/ML Overview

    The provided text describes a 510(k) submission for the MEDPOR® Ocular Screw and Accessories (K971583). This submission is for a medical device that assists in attaching an ocular prosthesis to an orbital implant.

    Crucially, the document does not contain information about acceptance criteria, device performance studies, sample sizes, expert qualifications, adjudication methods, MRMC studies, standalone performance, or training set details.

    The submission is based on the device being substantially equivalent to a predicate device (an Ocular Screw and Accessories currently approved for sale by Porex Surgical). The only change is a revision in the timing of device use: the new version allows the device to be used at the time of enucleation, whereas the predicate device required the ocular implant to be vascularized first.

    Therefore, I cannot provide the requested table and detailed information about a study proving acceptance criteria. The information is simply not present in the provided text.

    Ask a Question

    Ask a specific question about this device

    K Number
    K954939
    Date Cleared
    1996-01-25

    (87 days)

    Product Code
    Regulation Number
    886.3320
    Reference & Predicate Devices
    N/A
    Why did this record match?
    Device Name :

    MEDPOR OCULAR SCREW & ACCESSORIES

    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use
    Device Description
    AI/ML Overview
    Ask a Question

    Ask a specific question about this device

    Page 1 of 1