Search Results

The Intravascular Administration Set and Extension Set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into the patient's artery or vein. The Administration Set is also intended for use with a peristaltic pump for IV purposes only.

The Promepla Intravascular administration and extension sets contain components that are commonly found in this category of IV sets. The IV Administration (pump tube) Set belongs to a full line of intravenous fluid delivery sets. It is an infusion set intended to deliver fluids, medications, blood and blood products, using continuous or intermittent delivery through clinically acceptable routes of administration (e.g. intravenous, intra-arterial, subcutaneous, epidural, enteral or irrigation of fluid spaces). An optional component, a flow controller allows the use with a peristaltic pump. The Extension Set device is a triple lumen peripheral set with two detachable long lines, belonging to a family of extension tubing sets. This device uses a main gravity drip line, plus the two long extension limbs. It is a connector system, which has anti free-flow valves and line clamps, which are common in intravascular extension sets on the market. The extension set allows IV fluids to be given simultaneously by way of the same connector. Both the IV Administration Set and Extension Set are provided sterile (by Eto) and are for single use only. They are intended only for use by trained professionals in a clinic or hospital environment.

This 510(k) submission (K071421) for the Promepla Intravascular Administration Set and Extension Set describes a conventional predicate device comparison and does not involve a study to prove the device meets acceptance criteria for an AI/ML powered device. The document is for a medical device that administers fluids and is not an AI/ML powered device.

Therefore, most of the requested information regarding acceptance criteria, performance studies, sample sizes, ground truth establishment, expert involvement, and MRMC studies for AI/ML devices is not applicable to this submission.

The submission focuses on demonstrating substantial equivalence to predicate devices based on intended use, design, materials, and conducted bench testing (implied, though not detailed in the provided snippets).

The relevant sections from the input that are applicable are:

• Device Trade Name: Promepla Intravascular Administration Set and Extension Set
• Intended Use: "The Intravascular Administration Set and Extension Set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into the patient's artery or vein. The Administration Set is also intended for use with a peristaltic pump for IV purposes only."
• Comparison to Predicate Devices: "Based upon the intended use, design, materials, and the testing conducted, it can be concluded the Promepla Intravascular Administration Set and Extension Set are substantially equivalent to the predicate devices."

Since this is a traditional 510(k) for a non-AI/ML device, the detailed questions about AI/ML specific study design are not applicable.

Ask a specific question about this device

The Intravascular Administration Set and Extension Set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into the patient's artery or vein. The Intravascular Administration Set and Extension Set may incorporate componentry that aid in the prevention of accidental needle sticks.

The Intravascular Administration Set and Extension Set is components commonly found on intravascular administration sets. Intravascular administration sets consists of various components such as: bag spike, drip chamber, burette, tubing, Y-site, clamp, flow controller, check valve injection site, needleless injection site, stopcock, manifold, filter, flash bulb, luer connectors and bag hanger. Extension sets consist of various parts such as: luer connector, tubing, clamp, check valve flow controller, Y-site, injection port, needleless injection port, stopcock, filter, and manifold. For custom applications, a customer may request a certain length, priming volume and componentry. So. the set and actual components will vary with customer specifications.

Components will be assembled into standard configurations specified by the customer and packaged.

I am sorry, but based on the provided text, there is no information about acceptance criteria, device performance metrics, clinical study design, or expert involvement as described in your request. The document appears to be a 510(k) summary for an "Intravascular Administration Set and Extension Set," primarily focusing on regulatory information, device description, intended use, and biocompatibility, but not on clinical performance evaluation details.

Ask a specific question about this device