Search Results
Found 2 results
510(k) Data Aggregation
(198 days)
COPA AMD
COPA AMD dressings are indicated for use in management of post-surgical incisions, pressure sores, venous stasis ulcers, diabetic ulcers, donor sites, abrasions, lacerations, 1st and 200 degree burns, dermatologic disorders, other wounds inflicted by trauma and, as a secondary dressing or cover dressing for packed wounds.
COPA AMD is a hydrophilic polyurethane foam that is impregnated with Polyhexamethylene Biguanide Hydrochloride (PHMB), an antimicrobial agent that protects the dressing from bacterial penetration and colonization.
Here's an analysis of the provided text to extract the requested information regarding the device's acceptance criteria and studies:
Assessment: The provided document is a 510(k) Premarket Notification for the COPA AMD Antimicrobial Wound Dressing, specifically for a change in sterilization method from ETO to Gamma irradiation. It is primarily concerned with demonstrating substantial equivalence to a legally marketed predicate device, not with establishing novel performance characteristics through extensive clinical studies. Therefore, many of the typical performance study details for a new device are not present.
1. A table of acceptance criteria and the reported device performance
Acceptance Criteria | Reported Device Performance |
---|---|
Substantial Equivalence to existing COPA AMD antimicrobial wound dressings in: | The COPA AMD antimicrobial wound dressing is substantially equivalent to the existing COPA AMD antimicrobial wound dressings in intended use, materials, physical characteristics, and performance characteristics. |
- Intended Use | Met |
- Materials | Met |
- Physical Characteristics | Met |
- Performance Characteristics | Met |
Change in sterilization method from ETO to Gamma irradiation | Not explicitly stated as "met" with specific criteria, but the 510(k) was cleared, implying the change was deemed acceptable and did not alter equivalence. The "Performance Data" section mentions "in-vitro testing" but doesn't detail specific acceptance criteria for this change. |
2. Sample size used for the test set and the data provenance (e.g. country of origin of the data, retrospective or prospective)
The document primarily discusses "in-vitro testing" to support the change in sterilization method. It does not provide details on:
- Sample size for a test set: No specific sample sizes for in-vitro tests are mentioned.
- Data provenance: No country of origin is specified for the in-vitro data.
- Retrospective or prospective: This is not applicable as it's in-vitro testing and not a human study.
3. Number of experts used to establish the ground truth for the test set and the qualifications of those experts (e.g. radiologist with 10 years of experience)
This is not applicable to this 510(k) submission. The submission focuses on demonstrating substantial equivalence through in-vitro testing related to a sterilization change, not on diagnostic performance where expert-established ground truth would be required.
4. Adjudication method (e.g. 2+1, 3+1, none) for the test set
This is not applicable as there is no mention of a human-read test set or expert adjudication.
5. If a multi reader multi case (MRMC) comparative effectiveness study was done, If so, what was the effect size of how much human readers improve with AI vs without AI assistance
This is not applicable. The device is an antimicrobial wound dressing, not an AI-powered diagnostic tool. Therefore, MRMC studies or AI assistance are irrelevant.
6. If a standalone (i.e. algorithm only without human-in-the-loop performance) was done
This is not applicable as the device is not an algorithm or AI.
7. The type of ground truth used (expert consensus, pathology, outcomes data, etc)
For the "in-vitro testing" mentioned, the ground truth would typically be established by standardized laboratory methods and analytical results, not by expert consensus, pathology, or outcomes data in the context of a clinical study. The document does not specify the exact nature of this "ground truth" but implies it's related to material properties, sterility, or antimicrobial effectiveness after gamma irradiation.
8. The sample size for the training set
This is not applicable. The device is a physical wound dressing and does not involve AI algorithms that require training sets.
9. How the ground truth for the training set was established
This is not applicable as there is no training set for this device.
Ask a specific question about this device
(187 days)
COPA AMD ANTIMICROBIAL WOUND DRESSING
COPA AMD dressings are indicated for use in management of post-surgical incisions, pressure sores, venous stasis ulcers, diabetic ulcers, donor sites, abrasions, 1st and 200 degree burns, dermatologic disorders, other wounds inflicted by trauma and, as a secondary dressing or cover dressing for packed wounds.
COPA AMD is a hydrophilic polyurethane foam that is impregnated with Polyhexamethylene Biguanide Hydrochloride (PHMB), an antimicrobial agent that protects the dressing from bacterial penetration and colonization.
The provided text from the 510(k) Premarket Notification for the COPA AMD Antimicrobial Wound Dressing describes performance data related to its antimicrobial properties. The information pertains to the device's ability to prevent bacterial penetration and colonization.
Here's a breakdown of the requested information based on the provided text:
1. Table of acceptance criteria and the reported device performance
Acceptance Criteria (Implied) | Reported Device Performance |
---|---|
Broad-spectrum antimicrobial activity against specified organisms | Demonstrated broad-spectrum activity against 6 organisms (gram-positive, gram-negative, and fungal types). |
Effectiveness over time against bacterial challenge | Total kill was achieved for 7 consecutive days, with a daily challenge of >6 log of each organism. |
Target organisms | P. aeruginosa, E. coli, C. albicans, S. epidermidis, S. aureus, E. faecalis. |
2. Sample size used for the test set and the data provenance
- Sample size: Not explicitly stated in terms of the number of unique dressings or tests. The tests were performed in-vitro and an animal testing was also mentioned.
- Data provenance: The tests were described as "in-vitro and animal testing," indicating laboratory and possibly animal model experiments. The country of origin for these tests is not specified, but the submission is to the US FDA.
3. Number of experts used to establish the ground truth for the test set and the qualifications of those experts
Not applicable. The performance data is based on laboratory (in-vitro) and animal testing, which typically relies on established microbiological and scientific protocols rather than expert consensus on subjective observations.
4. Adjudication method (e.g., 2+1, 3+1, none) for the test set
Not applicable. This type of adjudication is relevant for studies involving human interpretation (e.g., image reading), not for laboratory or animal testing results.
5. If a multi-reader multi-case (MRMC) comparative effectiveness study was done, if so, what was the effect size of how much human readers improve with AI vs without AI assistance
Not applicable. This device is a wound dressing, not an AI-assisted diagnostic tool. Therefore, an MRMC study comparing human readers with and without AI assistance is not relevant.
6. If a standalone (i.e., algorithm only without human-in-the-loop performance) was done
Not applicable. This device is a physical wound dressing and does not involve an algorithm or AI.
7. The type of ground truth used (expert consensus, pathology, outcomes data, etc.)
The ground truth was established through microbiological assays (quantifying bacterial kill) for the in-vitro tests and likely biological endpoints related to infection or wound healing for the animal testing.
8. The sample size for the training set
Not applicable. This device is not an AI/ML algorithm that requires a training set. The "testing" referred to is for device performance, not algorithm training.
9. How the ground truth for the training set was established
Not applicable, as there is no training set for this device.
Ask a specific question about this device
Page 1 of 1