Search Filters

Search Results

Found 1 results

510(k) Data Aggregation

    K Number
    K110574
    Date Cleared
    2011-05-18

    (78 days)

    Product Code
    Regulation Number
    888.3030
    Reference & Predicate Devices
    Why did this record match?
    Device Name :

    BIOMET MICROFIXATION STERNALOCK BLU STERNAL CLOSURE SYSTEM

    AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
    Intended Use

    Biomet Microfixation SternaLock Blu Sternal Closure System is intended for use in the stabilization and fixation of fractures of the anterior chest wall including Sternal fixation following Sternotomy and Sternal reconstructive surgical procedures

    Device Description

    Biomet Microfixation Sternal Closure System contains plates and 2.4mm and 2.7mm diameter self-drilling screw with maximum length of 20mm. The screw is designed so that a predrilled hole is not required, but may be used.

    AI/ML Overview

    The provided text describes a 510(k) premarket notification for the Biomet Microfixation Sternal Closure System. The acceptance criteria and the study proving it meets these criteria are outlined in the "Substantial Equivalence" section of the document.

    Here's a breakdown of the requested information:

    1. Table of acceptance criteria and the reported device performance:

    Acceptance Criteria (Requirement)Reported Device Performance
    Meet or exceed parameters of predicates for Torsional insertion and fracture test.Exceeded Requirements

    2. Sample size used for the test set and the data provenance:

    • Sample Size: Not explicitly stated. The document refers to "mechanical testing" and "the devices" which implies a sample of devices were tested, but the specific number is not provided.
    • Data Provenance: Not explicitly stated. However, given that it's mechanical testing of a medical device, it would be considered prospective testing performed in a controlled laboratory setting. The origin isn't specified beyond being conducted by Biomet Microfixation.

    3. Number of experts used to establish the ground truth for the test set and the qualifications of those experts:

    • Number of Experts: Not applicable. The "ground truth" for this type of mechanical testing is based on established engineering parameters and predicate device performance, not expert human interpretation.
    • Qualifications of Experts: N/A

    4. Adjudication method for the test set:

    • Adjudication Method: Not applicable. The tests are objective mechanical measurements, not subjective evaluations requiring adjudication.

    5. If a multi-reader multi-case (MRMC) comparative effectiveness study was done, and if so, what was the effect size of how much human readers improve with AI vs without AI assistance:

    • MRMC Study: No. This is a medical device (sternal closure system) involving physical implantation and mechanical performance, not an AI-assisted diagnostic tool. Therefore, an MRMC comparative effectiveness study involving human readers and AI assistance is not relevant.
    • Effect Size: N/A

    6. If a standalone (i.e. algorithm only without human-in-the-loop performance) was done:

    • Standalone Performance: Not applicable. This device is a physical implant, not an algorithm.

    7. The type of ground truth used:

    • The ground truth for the mechanical testing (Torsional insertion and fracture test) was based on: Established engineering parameters and the performance characteristics of predicate devices. The new device was required to "Meet or exceed parameters of predicates."

    8. The sample size for the training set:

    • Sample Size: Not applicable. This document describes mechanical testing for a physical implant, not a machine learning model that requires a training set.

    9. How the ground truth for the training set was established:

    • Ground Truth Establishment: Not applicable, as there is no training set for this type of device submission.
    Ask a Question

    Ask a specific question about this device

    Page 1 of 1