Search Results

Therm-X (Therm-X Home and Therm-X AT) combines cold, heat contrast, and compression therapy. Therm-X (Therm-X Home and Therm-X AT) is intended to treat post-surgical and acute injuries to reduce edema, swelling, and pain for which cold and compression are indicated. It is intended to treat post traumatic and post-surgical medical and/or surqical conditions for which localized thermal therapy (hot or cold) are indicated. The Therm-X (Therm-X Home and Therm-X AT) is also intended for treatment of disorders associated with vascular or lymphatic insufficiency, such as lymphedema and chronic venous insufficiency (CVI). Therm-X Home systems also provide DVT therapy. Therm-X Home systems with DVT therapy are intended to reduce the risk of the formation of deep venous thrombosis (DVT) by aiding blood flow back to the heart via lower extremity limb compression. Therm-X (Therm-X Home and Therm-X AT) is intended to be used by, or on the order of, licensed health care professionals in rehabilitation facilities, outpatient clinics, athletic training settings, and home settings.

Therm-X is an AC powered, software-controlled multimodality device, designed to be used in a clinical or home-use setting, and under the direction, prescription, or supervision of a licensed healthcare professional. The device is available in two configurations: Therm-X Home and Therm-X AT. Therm-X (Therm-X Home and Therm-X AT) features iceless cold therapy, heat therapy, and contrast (alternating heat and cold) therapy. The Therm-X Home system also provides DVT prophylaxis therapy and continuous therapy for users who wish to receive treatment over an extended period of time. Therm-X (Therm-X Home and Therm-X AT) consists of various reusable inflatable wraps for thermal treatment of the back, elbow, hand/wrist, shoulder, ankle, hip, lower leg, or knee and DVT prophylactic treatment applied to the foot or calf. Multi-patient use garments are available for all anatomical areas that can be cleaned and disinfected in between uses to be reused for different patients. Single-patient use garments are available for thermal treatment of the back, hand/wrist, shoulder, neck, ankle, hip, and knee and can be disposed of after patient treatment is concluded. The thermal garments are flexible coolant circulating garments that apply to the body to deliver cold, heat, or contrast therapy in combination with or without pneumatic compression. The foot and calf DVT prophylactic garments apply pneumatic compression alone and are intended for use by the Therm-X Home system only. Therm-X (Therm-X Home and Therm-X AT) is controlled by an intuitive touch screen computer interface, allowing the user to manage the therapy modalities as well as easily adjust and monitor treatment times, temperature, and compression settings. Therm-X AT and Therm-X Home models provide an optional password protection feature that allows for a user to use only stored cycles, giving health care providers an ability to ensure compliance to a chosen cycle. The device also provides functionality to allow the health care provider to assign a date at which the user will be able to access a second stored cycle instead of the first. The Therm-X device also allows users to chanqe treatment pressure and temperatures to less extreme therapies (e.g. changing a warm cycle to a lower warm temperature or changing a cold cycle to a higher cold temperature). Therm-X (Therm-X Home and Therm-X AT) is approximately 15 lbs. when filled with coolant and has a handle placed on the top of the device. It has a centralized coolant reservoir accessible through a cap located at the back of the device that supplies its coolant and radiator systems. The reservoir, pumps, fans, circuit board, and other components of the Therm-X are located inside a covered enclosure made out of plastic and metal components, accessible only using a specialized tool.

Therm-X (Therm-X Home and Therm-X AT) combines cold, heat, contrast, and compression therapy. Therm-X is intended to treat post-surgical and acute injuries to reduce edema, swelling, and pain for which cold and compression are indicated. It is intended to treat post-surgical medical and/or surgical conditions for which localized thermal therapy (hot or cold) are indicated. Therm-X Home systems also provide DVT therapy. Therm-X Home systems with DVT therapy are intended to reduce the risk of the formation of deep venous thrombosis (DVT) by aiding blood flow back to the heart via lower extremity limb compression. Therm-X (Therm-X Home and Therm-X AT) is intended to be used by, or on the order of, licensed health care professionals in rehabilitation facilities, outpatient clinics, athletic training settings.

Therm-X is an AC powered, software-controlled multimodality device, designed to be used in a clinical or home-use setting, and under the direction, prescription, or supervision of a licensed healthcare professional. The device is available in two configurations: Therm-X Home and Therm-X AT. Therm-X (Therm-X Home and Therm-X AT) features iceless cold therapy, heat therapy, and contrast (alternating heat and cold) therapy. The Therm-X Home system also provides DVT prophylaxis therapy and continuous therapy for users who wish to receive treatment over an extended period of time. Therm-X consists of various reusable inflatable wraps for thermal treatment of the back, elbow, hand/wrist, shoulder, ankle, hip, lower leg, or knee and DVT prophylactic treatment applied to the foot or calf. Multi-patient use garments are available for all anatomical areas that can be cleaned and disinfected in between uses to be reused for different patients. Single-patient use garments are available for thermal treatment of the back, hand/wrist, shoulder, neck, ankle, hip, and knee and can be disposed of after patient treatment is concluded. The thermal garments are flexible coolant circulating garments that apply to the body to deliver cold, heat, or contrast therapy in combination with or without pneumatic compression. The foot and calf DVT prophylactic garments apply pneumatic compression alone and are intended for use by the Therm-X Home system only. Therm-X is controlled by an intuitive touch screen computer interface, allowing the user to manage the therapy modalities as well as easily adjust and monitor treatment times, temperature, and compression settings. Therm-X AT and Therm-X Home models provide an optional password protection feature that allows for a user to use only stored cycles, giving health care providers an ability to ensure compliance to a chosen cycle. The device also provides functionality to allow the health care provider to assign a date at which the user will be able to access a second stored cycle instead of the first. The Therm-X device also allows users to change treatment pressure and temperatures to less extreme therapies (e.g. changing a warm cycle to a lower warm temperature or changing a cold cycle to a higher cold temperature). The Therm-X is approximately 15 lbs. when filled with coolant and has a handle placed on the top of the device. It has a centralized coolant reservoir accessible through a cap located at the back of the device that supplies its coolant and radiator systems. The reservoir, pumps, fans, circuit board, and other components of the Therm-X are located inside a covered enclosure made out of plastic and metal components, accessible only using a specialized tool.

Therm-X (Therm-X Home and Therm-X AT) combines cold, heat, contrast, and compression therapy. Therm-X is intended to treat post-surgical and acute injuries to reduce edema, swelling, and pain for which cold and compression are indicated. It is intended to treat post-surgical medical and/or surgical conditions for which localized thermal therapy (hot or cold) are indicated. Therm-X Home systems also provide DVT therapy. Therm-X Home systems with DVT therapy are intended to reduce the risk of the formation of deep venous thrombosis (DVT) by aiding blood flow back to the heart via lower extremity limb compression. Therm-X (Therm-X Home and Therm-X AT) is intended to be used by, or on the order of, licensed health care professionals in rehabilitation facilities, outpatient clinics, athletic training settings.

Therm-X is an AC powered, software-controlled multimodality device, designed to be used in a clinical or home-use setting, and under the direction, prescription, or supervision of a licensed healthcare professional. The device is available in two configurations: Therm-X Home and Therm-X AT. Therm-X (Therm-X Home and Therm-X AT) features iceless cold therapy, heat therapy, and contrast (alternating heat and cold) therapy. The Therm-X Home system also provides DVT prophylaxis therapy and continuous therapy for users who wish to receive treatment over an extended period of time. Therm-X consists of various reusable inflatable wraps for thermal treatment of the back, elbow, shoulder, ankle, hip, or knee and DVT prophylactic treatment applied to the foot or calf. Multipatient use garments are available for all anatomical areas that can be cleaned and disinfected in between uses to be reused for different patients. Single-patient use garments are available for thermal treatment of the shoulder, ankle, hip, and knee and can be disposed of after patient treatment is concluded. The thermal garments are flexible coolant circulating garments that apply to the body to deliver cold, heat, or contrast therapy in combination with pneumatic compression. The Foot and calf DVT prophylactic garments apply pneumatic compression alone and are intended for use by the Therm-X Home system only. Therm-X is controlled by an intuitive touch screen computer interface, allowing the user to manage the therapy modalities as well as easily adjust and monitor treatment times, temperature, and compression settings. Therm-X is approximately 15 lbs. when filled with coolant and has a handle placed on the top of the device. It has a centralized coolant reservoir accessible through a cap located at the back of the device that supplies its coolant and radiator systems. The reservoir, pumps, fans, circuit board, and other components of the Therm-X are located inside a covered enclosure made out of plastic and metal components, accessible only using a specialized tool.

Therm-X (Therm-X Pro, Therm-X Pro Athlete, and Therm-X AT) combines cold, heat, contrast, and compression therapy. Therm-X is intended to treat post-surgical and acute injuries to reduce edema, swelling, and pain for which cold and compression are indicated. It is intended to treat post-surgical medical and/or surgical conditions for which localized thermal therapy (hot or cold) are indicated. Therm-X Pro and Therm-X Pro Athlete systems also provide DVT therapy. Therm-X Pro Athlete are intended to reduce the risk of the formation of deep venous thrombosis (DVT) by aiding blood flow beart via lower extremity limb compression. Therm-X (Therm-X Pro Athlete and Therm-X AT) is intended to be used by, or on the order of, licensed health care professionals in rehabilities, outpatient clinics, athletic training settings, and home settings.

Therm-X is an AC powered, software-controlled multimodality device, designed to be used in a clinical or home-use setting, and under the direction, prescription or supervision of a licensed healthcare professional. The device is available in three configurations: Therm-X Pro Athlete and Therm-X AT. Therm-X (Therm-X Pro, Therm-X Pro Athlete and Therm-X AT) features iceless cold therapy, heat therapy, and contrast (alternating heat and cold) therapy. Therm-X Pro and Therm-X Pro Athlete systems also provide DVT prophylaxis therapy. Therm-X consists of various reusable inflatable wraps for thermal treatment of the back, elbow, shoulder, ankle, or knee and DVT prophylactic treatment applied to the foot or calf. The thermal garments are flexible coolant circulating garments that apply to the body to deliver cold, heat, or contrast therapy in combination with pneumatic compression. The Foot and calf DVT prophylactic garments apply pneumatic compression alone and are intended for use by Therm-X Pro and Therm-X Pro Athlete systems only. Therm-X is controlled by an intuitive touch screen computer interface, allowing the user to manage the therapy modalities as well as easily adjust and monitor treatment times, temperature and compression settings. Therm-X AT and Therm-X Pro models provide an optional password protection feature that allows for a home user to use a stored cycle without being able to change it, giving health care providers an ability to ensure compliance to a chosen cycle. The device also provides functionality to allow the health care provider to assign a date at which the user will be able to access a second stored cycle instead of the first. Therm-X is approximately 15 lbs. when filled with coolant and has a handle placed on the top of the device. It has a centralized coolant reservoir accessible through a cap located at the back of the device that supplies its coolant and radiator systems. The reservoir, pumps, fans, circuit board, and other components of the Therm-X system are located inside a covered enclosure made out of plastic and metal components, accessible only using a specialized tool. Therm-X is a class II medical device per FDA classification and has been previously cleared by the FDA under K181149. The Therm-X single-patient use garments under K181149 have been changed to multi-patient use garments through the use of a low-level disinfection process. Based on the guidance "Guidance for Industry and Food and Drug Administration Staff: Reprocessing Medical Devices in Health Care Settings: Validation Methods and Labeling" (March 17, 2015), the Therm-X garments are considered reusable medical devices initially supplied as non-sterile to the user and requiring the user to process (i.e., disinfect) the device for initial use, as well as to reprocess the device after each use. The qarments are considered non-critical devices in that they contact only intact skin and do no penetrate it. Therm-X garments may become contaminated with microorganisms and organic soil during patient care and such contamination may not be visible. To account for this contamination and to prevent patient harm when used with multiple patients, Zenith uses a low-level disinfection process for the Therm-X garments.

Therm-X (Therm-X Pro, Therm-X Pro Athlete, and Therm-X AT) combines cold, heat, contrast, and compression therapy. Therm-X is intended to treat post-surgical and acute injuries to reduce edema, swelling, and pain for which cold and compression are indicated. It is intended to treat post traumatic and post-surgical medical and/or surgical conditions for which localized thermal therapy (hot or cold) are indicated. Therm-X Pro and Therm-X Pro Athlete systems also provide DVT therapy. Therm-X Pro and Therm-X Pro Athlete are intended to reduce the risk of the formation of deep venous thrombosis (DVT) by aiding blood flow back to the heart via lower extremity limb compression. Therm-X (Therm-X Pro, Therm-X Pro Athlete and Therm-X AT) is intended to be used by, or on the order of, licensed health care professionals in rehabilitation facilities, outpatient clinics, athletic training settings, and home settings.

Therm-X is an AC powered, software-controlled multimodality device, designed to be used in a clinical or home-use setting, and under the direction, prescription of a licensed healthcare professional. The device is available in three configurations: Therm-X Pro, Therm-X Pro Athlete and Therm-X AT. Therm-X (Therm-X Pro, Therm-X Pro Athlete and Therm-X AT) features iceless cold therapy, heat therapy, and contrast (alternating heat and cold) therapy. Therm-X Pro and Therm-X Pro Athlete systems also provide DVT prophylaxis therapy. Therm-X consists of various single-patient use inflatable wraps for thermal treatment of the back, elbow, shoulder, ankle, or knee and DVT prophylactic treatment applied to the foot or calf. The thermal garments are flexible coolant circulating garments that apply to the body to deliver cold, heat, or contrast therapy in combination with pneumatic compression. The Foot and calf DVT prophylactic garments apply pneumatic compression alone and are intended for use by Therm-X Pro and Therm-X Pro Athlete systems only. Therm-X is controlled by an intuitive touch screen computer interface, allowing the user to manage the therapy modalities as well as easily adjust and monitor treatment times, temperature and compression settings. Therm-X AT and Therm-X Pro models provide an optional password protection feature that allows for a home user to use a stored cvcle without being able to change it, giving health care providers an ability to ensure compliance to a chosen cycle. The device also provides functionality to allow the health care provider to assign a date at which the user will be able to access a second stored cycle instead of the first. The Therm-X is approximately 15 lbs. when filled with coolant and has a handle placed on the top of the device. It has a centralized coolant reservoir accessible through a cap located at the back of the device that supplies its coolant and radiator systems. The reservoir, pumps, fans, circuit board, and other components of the Therm-X are located inside a covered enclosure made out of plastic and metal components, accessible only using a specialized tool.