Search Results

Removable Cuff Abutments are screw retained endosseous dental implant abutments and are intended to function as an anchor to which prosthetic devices may be attached using either dental oement or a lingual screw. They are indicated for use on endosseous implants placed in the mandible or maxilla for support of fixed bridgework, removable bridgework or free standing single tooth replacements.

A Removable Cuff Abutment is a two piece titanium alloy abutment with a separate titanium alloy retaining screw. Each Removable Cuff Abutment is composed of one abutment core body and one removable cuff. Removable Cuff Abutments will be offered as fixed abutments and as pre-angled (15 and 25 degree) abutments for use with both cement and screw retained prosthetics. Abutments will be available in three different diameters at the abutment/implant interface: 3.25mm, 4.0mm and 5.0mm. Flare diameters of cuffs will range from 4.0 to 6.5mm and cuff heights will range from 0.5 mm. A new feature is the addition of a transverse (lingual) screw to some designs. This feature will permit attachment of screw retained prostheses in addition to cement retained prostheses. Removable Cuff Abutments will be packaged with or without the transverse (lingual) screw components.

A Temporary Abutment is indicated for use for a maximum of six weeks as an abutment for cemented provisional prostheses. This abutment can be used for single tooth provisional restorations or splinted to other abutments for multi-unit provisional restorations. Single use.

The Spline Dental Implant System - Temporary Abutment will consist of a titanium alloy abutment cylinder with a separate titanium alloy retaining screw. A Temporary Abutment will attach.directly to the Spline implant with the retaining screw but does not engage the tines. It will be available in three different cuff diameters at the abutment/implant interface: 3.25mm, 4.0mm and 5.0mm. Abutments will also be available with straight wall or stepped cuffs with either a straight or a tapered retentive wall.

Sulzer Calcitek Dental Implant Systems are designed for use in edentulous mandibles or maxillae for attachment of complete denture prostheses, or as a terminal or intermediary abutment for fixed or removable bridgework, or as a free standing single tooth replacement. The use of the 5.0mm implant is recommended when the quantity and density of bone would dictate the use of an implant larger than 4.0mm.

Spline XI implants are available both with and without HA-coating. They are available in 3.75mm or 5.0mm diameters and are available in five lengths: 8, 10, 13, 15 and 18mm. A total of four surface styles are available: HA-coated, HAcoated/textured, HA-coated/machined and textured/machined. The implants are supplied sterile.

The Variable Parallel Pin is intended to provide a visual reference for evaluating parallelism, prosthetic fit and implant spacing between implants and natural teeth during implant placement surgery. The Variable Parallel Pin is indicated for use in evaluating parallelism and fit of the many implant maning and fit of prosthetics with up to 25 degrees and to gadge implaire opensy lants and adjacent natural teeth.

The Variable Parallel Pin consists of two pivoting pegs that lock in orientations from straight (0) to 25°. The Variable Parallel Pin has cuff width geometry's that match the flare diameters of prosthetic abutments.

Calcitek Dental Implant Systems are designed for use in edentulous mandibles or maxillae for attachment of complete denture prostheses, or as a terminal or intermediary abutment for fixed or removable bridgework, or as a free standing single tooth replacement. The use of the 5.0mm implant is recommended when the quantity and density of bone would dictate the use of an implant larger than 4.0mm.

These Class III dental implants are supplied sterile, ready for placement by a licensed dontist.

For use when screw retention of a single or splinted prosthesis is desired, e.g., single crown, bars and bridges. Implants must be within 30° of parallelism to each other for a splinted prosthesis.

The Spline Engaging Shouldered Abutment System provides an antirotational option for single or multiple tooth prosthetic restorations. The components of this system are supplied non-sterile, for use by licensed dentists.

For use in edentulous mandibles or maxillae for attachment of complete denture prostheses, or as a terminal or intermediary abutment for fixed or removable bridgework, or as a free standing single tooth replacement.

These Class III dental implants are supplied sterile, ready for placement by a licensed dentist. There has been no significant change to the prosthetic components.