Search Results

The intended use of the Liberator™ is to provide mobility for those persons limited to a seated position, which are capable of operating a simple hand control. The Liberator™ may be operated on internal DC batteries, which can be recharged by using a wall- charger and supplemented by using the detachable solar assisted battery maintaining device (Solar Companion).

The Liberator™ powered wheelchair is a six wheeled battery powered wheelchair. It has a controller system, which is used to operate the Liberator™ powered wheelchair. The one-piece base of the wheelchair is made of welded steel construction. The main frame also consists of a battery floor pan. The center drive wheels are mounted on the drive shafts of separate motor/gear assemblies, one on the left side of the wheelchair, the other on the right side of the wheelchair. The seat comes with ergonomic contoured comfort cushions, recliner, tilt-up adjustable arm rests, and patient can dial in their seating Position, can adjust the setting for air fan control, joy stick adjustments and table adjustments and settings. The Liberator™ powered wheelchair requires 2 NF22 batteries, has an on board charger, the Solar Companion, with solar panel and an assisted battery maintaining device (Solar Companion). The Liberator™ powered wheelchair has a maximum load capacity of 300 lbs. The Liberator™ can travel at ranges of 15-20 miles with maximum speed of 4.09 miles per hour on flat terrain under ideal conditions (RESNA testing). In order to achieve the maximum extended range of 20 miles the Solar Companion has the ability to maintain the batteries based on the intensity, angle, and availability of sunlight. The Liberator™ has an air ride suspension system seat, cushion ventilation system (fan) for the seat and lumbar cushion with laser ported holes in fabric. The Solar Companion is an onboard battery maintaining device that comes with the Liberator™. It has the ability to maintain the batteries based on availability sunlight intensity and angle. The solar panel assembly is affixed to the Liberator™ and the height can be adjusted to allow the user excellent visibility