Search Results

The Noris LONGY and LONGY-N implants are indicated for splinted restorations in the maxilla, utilizing a minimum of two implants to support fixed or removable prosthetic devices with partially or fully edentulous upper jaws, and may be suitable for immediate loading when good primary stability is achieved and with appropriate occlusal loading. The procedure can be accomplished in a one-stage or two-stage surgical operation.

The subject dental implant devices are single use devices, provided sterile by Gamma Radiation, made of Titanium alloy Ti-6Al-4V ELI (ASTM F136). The LONGY Implants and LONGY-N Implants bare internal hex connection, diameters of 3.75 and 4.0mm and lengths of 18, 20, 22 and 25 mm. The Noris LONGY and LONGY-N implants are indicated for splinted restorations in the maxilla, utilizing a minimum of two implants to support fixed or removable prosthetic devices in patients with partially or fully edentulous upper jaws, and may be suitable for immediate loading when good primary stability is achieved. The procedure can be accomplished in a one-stage surgical operation. All implants are appropriate for immediate loading when good primary stability is achieved and with appropriate occlusal loading. LONGY and LONGY-N dental implants are compatible with FDA cleared Noris Medical Ltd. Internal Hex platform abutments and superstructures only intended for multiple-unit loading, provided that they do not exceed an angulation of 30° (≤30).

Noris Medical Ltd. Conical Platform Dental Implants System is intended to replace missing tooth/teeth in either jaw for supporting prosthetic devices that may aid in restoring the patient's chewing function. Noris Medical Ltd. Conical platform Dental Implants diameter 3.25 are intended to replace lateral incisor in Maxilla and/or a central or lateral incisor in the mandible for supporting prosthetic devices that may aid in restoring the patient's chewing function. The procedure can be accomplished in a one-stage surgical operation. All impants are appropriate for immediate loading when good primary stability is achieved and with appropriate occlusal loading.

The subject dental implant devices are single use devices, provided sterile by Gamma Radiation, made of Titanium alloy Ti- 6Al-4V ELI (ASTM F136). The UniCon and Tuff Unicon Implants are designed with conical connection comprises of cone and internal hex connection, diameters of 3.25, 3.5, 3.75 and 4.2 mm and lengths of 8, 10, 11.5, 13, 16 and 18 mm. Both Implants are designed with three thread zones, the Tuff UniCon with lower V-shape thread zone and UniCon with sharp buttress threads enables self-tapping. The middle zone square type thread of Tuff UniCon and wide edge buttress of UniCon is used for compressing cancellous bone. The micro threads on the upper zone enables less pressure on the crestal bone. The subject devices undergo RBM (Resorbable Blasting Media) surface treatment and color anodization within its connection for the purpose of color coding. It is indicated to replace missing tooth/teeth in either jaw for supporting prosthetic devices that may aid in restoring the patient's chewing function. The Implants Diameter Ø3.25 are intended to replace lateral incisor in maxilla and/or a central or lateral incisor in the mandible for supporting prosthetic devices that may aid in restoring the patient's chewing function. Healing Caps are Titanium devices mounted onto the dental implant before the soft tissue is sutured around the implant and are intended to protect the implant bore. The Subject Healing Cap with the conical connection fits the UniCon and Tuff Unicon Implants. It is single use device, non-sterile and made of Titanium alloy Ti- 6Al-4V ELI (ASTM F136). The Healing Cap provided with 4.3mm, 4.8mm and 5.2mm Diameter and 4.5mm, 5.5mm, 6.5m, 7.5mm, 8.5mm External Body Height. The subject device undergoes color anodization. The Subject Abutments (temporary, straight, angular and screw retained) with the conical connection fits the UniCon and Tuff UniCon Implants. It is single use device, non-sterile and made of Titanium alloy Ti- 6Al-4V ELI (ASTM F136). The subject device undergoes color anodization. The abutments are provided in different types and dimensions. Multi-Unit Straight/Angular Screw Retained abutment are intended to function in the mandible or maxilla to support multiple-unit temporary or permanent restorations on Noris dental implants. The Subject Abutments with the conical connection fits the UniCon and Tuff UniCon Implants. It is single use device, non-sterile and made of Titanium alloy Ti- 6Al-4V ELI (ASTM F136). The subject device undergoes color anodization. The abutment screw is intended to fasten the abutment to a dental implant. The Subject Abutments screw with the conical connection fits the UniCon and Tuff Unicon Implants. It is single use device, non-sterile and made of Titanium alloy Ti- 6Al-4V ELI (ASTM F136). The Abutments screw provided with 2mm Diameter and 7.3 mm Length. The subject device undergoes color anodization. Cover screw- Healing Caps and Cover Screws are Titanium devices mounted onto the dental implant before the soft tissue is sutured in place around the implant and which are intended to protect the implant bore. The Subject Cover screw with the conical connection fits the UniCon and Tuff Unicon Implants. It is single use device, non-sterile and made of Titanium alloy Ti- 6Al-4V ELI (ASTM F136). The cover screws are provided with 3.2mm, 3.5mm Diameters and 4.9 mm Length. The subject device undergoes color anodization.

Noris Medical Dental Implants System is intended to replace missing tooth teeth in either jaw for supporting prosthetic devices that may aid in restoring the patient's chewing function. The procedure can be accomplished in a one-stage or two-stage surgical operation. All implants are appropriate for immediate loading when good primary stability is achieved and with appropriate occlusal loading. Noris Medical MBI Dental Implant System is One-Piece, self-tapping Implant, with integrated ball attachment, for singlestage implantation to stabilize a tissue-supported denture. MBI is designed for placement in a very narrow ridge.

Noris Medical MBI Dental Implant System is One-Piece, self-tapping Implant, with integrated ball attachment, for singlestage implantation to stabilize a tissue-supported denture. MBI is designed for placement in a very narrow ridge.

Noris Medical Dental Implants System is intended to replace missing tooth/teeth in either jaw for supporting prosthetic devices that may aid in restoring the patient's chewing function. The procedure can be accomplished in a one-stage or two-stage surgical operation. All implants are appropriate for immediate loading when good primary stability is achieved and with appropriate occlusal loading. Noris Medical Zygomatic Dental Implant System is intended to be implanted in the upper jaw arch to provide support for fixed or removable prosthetic devices in patients with partially or fully edentulous maxillae.

Noris Medical Dental Implants are tapered internal hex implants, designed to enable easy insertion while supporting excellent initial stability. The variable thread design enables self-tapping, thus providing solutions for a variety of bone conditions. Noris Medical multi-design features offer a solution for immediate placement and immediate loading. The implantation procedure can be accomplished in a one-stage or twostage surgical operation for all implants type beside the Mono(Noris Medical cleared K140440) which is for one stage only. Packaging has been designed for quick identification and easy opening. The Noris Medical Zygomatic Dental Implant is designed to provide a solution for cases of atrophic maxilla. The shape of the Noris Medical Zygomatic Dental Implant consists of sharp threads at the apical part. The platform of the Noris Medical Zygomatic Dental Implant is 3.75mm platform, with internal Hex connection. The Noris Medical Zygomatic Dental Implant is available in a large variety of lengths, from 30 mm to 57.5 mm. Prosthetic Components for Noris Medical Zygomatic Implant: Multi unit and Vari connect 45° prosthetic system are subject of this current submission as a part of the Zyqomatic Dental Implant System. Materials and Production: The implants and prosthetic components are manufactured from Titanium alloy complying with standard ASTM F 136 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant applications. Noris Medical employs the RBM (Resorbable Blast Media) surface treatment technology. The product is packed using materials known in the industry to be appropriate for medical device packaging and is provided with a minimum sterility assurance level of 10 ° validated in compliance with ANSI/AAMI/ISO 11137-1.

Noris Medical Ltd Dental Implants System is intended to replace missing tooth/ teeth in either jaw for supporting prosthetic devices that may aid in restoring the patient's chewing function. The procedure can be accomplished in a one-stage surgical operation. All implants are appropriate for immediate loading when good primary stability is achieved and with appropriate occlusal loading. Mono implants are specifically indicated for replacing maxillary lateral incisors and mandibular central and lateral incisors. They are used for immediate, non-occlusal provisionalization in single-tooth restorations. Multiple-unit restorations should be splinted together and may be used immediately when clinically appropriate.

The Noris Medical Dental Implants System consists of one or two stage endosseous form dental implants, internal hexagonal and one piece implants system Abutments and Superstructures are used in conjunction with an endosseous dental implant fixture to aid in prosthetic rehabilitation. The implantation procedure can be accomplished in a one-stage or two-stage surgical operation for all implants type beside the Mono which is for one stage only. The system includes Tuff Implants, Tuff TT Implants, Onyx Implants, and Mono Implants, all made of titanium alloy Ti 6Al 4V ELI. The system also includes prosthetic components such as healing caps, cemented restorations (straight and angular abutments), screw retained restorations (Multi unit, Esthetic screw abutments), removable restorations (Vari connect abutments, Ball attachments, Flat attachments), and accessories. The implants and prosthetic components are manufactured from Titanium alloy (Ti 6Al 4V ELI) and employ the SLA (Sandblasted, Large grit, Acid etched) surface treatment technology.