REDUCED SIZE ONCOLOGY SALVAGE SYSTEM

{0}------------------------------------------------ Image /page/0/Picture/1 description: The image shows the logo for Biomet Corporate Headquarters. The Biomet logo is in a bold, sans-serif font with a unique design. Below the logo, the words "CORPORATE HEADQUARTERS" are written in a smaller, serif font. ## SUMMMARY OF SAFETY AND EFFECTIVENESS | Applicant or Sponsor: | Biomet Orthopedics, Inc. | |-----------------------|--------------------------| | | 56 East Bell Drive | | | P.O. Box 587 | | | Warsaw, IN 46581-0587 | Contact Person: Sara B. Shultz Biomet Orthopedics, Inc. P.O. Box 587 Warsaw, IN 46581-0587 Phone: (574) 267-6639 Fax: (574) 372-1683 Reduced Size Oncology Salvage System Proprietary Name: Oncology Salvage Hip, Knee, Tibia, Total Femur Common or Usual Name: Prosthesis, Knee, Femorotibial, constrained, Classification Name: cemented, metal/polymer (888.3510) Device Product Code: 87KRO Legally Marketed Devices To Which Substantial Equivalence Is Claimed: Oncology Salvage System, K002757, Biomet, Inc. Indications for Use: The Reduced Size Oncology Salvage System (OSS) offers a variety of component options for treatment in small adults and children that require proximal femoral. distal femoral, total femur, or proximal tibial replacements, as well as, resurfacing components for the proximal tibia and distal femur. Indications: 1. Painful and disabled joint resulting from avascular necrosis, osteoarthritis, rheumatoid arthritis, or traumatic arthritis 2. Correction of varus, valgus, or post traumatic deformity 3. Correction of revision of unsuccessful osteotomy, arthrodesis, or previous joint replacement 4. Ligament deficiencies 5. Tumor resections 6. Treatment of non-unions, femoral neck and trochanteric fracture of the proximal femur with head involvement, unmanageable using other techniques 7. Revision of previously failed total joint arthroplasty 8. Trauma .. These device components are for cemented use only. MAILING ADDRESS P.O. Box 587 Warsaw, IN 46581-0587 - - - SHIPPING ADDRESS 56 E. Bell Drive Warsaw, IN 46582 I Image /page/0/Picture/20 description: The image shows the number 000181 in a bold, sans-serif font. The numbers are closely spaced together and are all the same size. The image is in black and white, and the numbers are dark against a light background. OFFICE 219.267.6639 FAX 219.267.8137 E-MAIL biomet@biomet.com {1}------------------------------------------------ ### DEPARTMENT OF HEALTH & HUMAN SERVICES Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" around the perimeter. Inside the circle is a stylized image of three human profiles facing right, with flowing lines representing hair or a wave-like design. ### Public Health Service Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 # JUN 0 5 2002 Ms. Sara B. Shultz Regulatory Specialist Biomet Orthopedics, Inc. P.O. Box 587 Warsaw. IN 46581-0587 Re: K021260 Trade Name: Reduced Size Oncology Salvage System Regulation Number: 21 CFR 888.3510 Regulation Name: Knee joint femorotibial metal/polymer constrained cemented prosthesis Regulatory Class: II Product Code: KRO Dated: April 18, 2002 Received: April 19, 2002 Dear Ms. Shultz: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. {2}------------------------------------------------ Page 2 -- Ms. Sara B. Shultz This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4659. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html. Sincerely yours, sincerely yours, Mark McMahon Celia M. Witten, Ph.D., M.D. Director Division of General, Restorative and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ Page 1 of 1 # 510 (k) Number (if known) : Device Name: Reduced Size Oncology Salvage System Indications For Use: The Reduced Size Oncology Salvage System (OSS) offers a variety of component options for treatment in small adults and children that require proximal femoral, distal femoral, total femur, or proximal tibial replacements, as well as, resurfacing components for the proximal tibia and distal femur. Indications: 1. Painful and disabled joint resulting from avascular necrosis, osteoarthritis, rheumatoid arthritis, or traumatic arthritis 2. Correction of varus, valgus, or post traumatic deformity 3. Correction of revision of unsuccessful osteotomy, arthrodesis, or previous joint replacement 4. Ligament deficiencies 5. Tumor resections 6. Treatment of non-unions, femoral neck and trochanteric fracture of the proximal femur with head involvement, unmanageable using other techniques 7. Revision of previously failed total joint arthroplasty 8. Trauma These device components are for cemented use only. Mark N. Milliken Division Sign-Off Division of General, Restorative and Neurological Devices KO21260 510(k) Number _ (PLEASE DO NOT WRITE BELOW THIS LINE. CONTINUE ON ANOTHER PAGE IF NEEDED.) Concurrence of CDRH, Office of Device Evaluation (ODE) Prescription Use (Per 21 CFR 801.109) OR Over-The-Counter-Use (Optional Format 1-2-96) 000003