SIMIDUR S1S

K020195 · Wieland Dental + Technik GmbH & Co. KG · EJS · Mar 15, 2002 · Dental

Device Facts

Record IDK020195
Device NameSIMIDUR S1S
ApplicantWieland Dental + Technik GmbH & Co. KG
Product CodeEJS · Dental
Decision DateMar 15, 2002
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 872.3060
Device ClassClass 2

Intended Use

Simidur S1S is a palladium-base ceramic alloy that can be used by dental technicians to fabricate dental appliances for patients. It is intended for manufacturing Crowns Short span bridges Long span bridges Removable partials and can be used for Telescopic and milling work Simidur S1S can be veneered with suitable dental ceramics as well as with dentalcomposites.

Device Story

Simidur S1S is a palladium-based (56.0%) dental casting alloy; used by dental technicians in laboratory settings to fabricate dental restorations; including crowns, bridges, and removable partials. Material is copper-free; compatible with dental ceramics and composites for veneering. Device provides high corrosion resistance and biocompatibility for permanent dental appliances. Clinical decision-making relies on technician fabrication of custom prosthetics to restore patient dental function.

Clinical Evidence

Bench testing only. Device complies with ISO 9693 standards for dental ceramic fused to metal restorative materials.

Technological Characteristics

Palladium-based (56.0%) alloy; copper-free. Complies with ISO 9693. Formulated for casting/milling dental restorations. Compatible with dental ceramics and composites.

Indications for Use

Indicated for patients requiring dental restorations including single crowns, short or long span bridges, and removable partials. Suitable for telescopic and milling work. No specific age or gender contraindications provided.

Regulatory Classification

Identification

A noble metal alloy is a device composed primarily of noble metals, such as gold, palladium, platinum, or silver, that is intended for use in the fabrication of cast or porcelain-fused-to-metal crown and bridge restorations.

Special Controls

*Classification.* Class II (special controls). The special control for these devices is FDA's “Class II Special Controls Guidance Document: Dental Noble Metal Alloys.” The devices are exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 872.9. See § 872.1(e) for availability of guidance information.

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ MAR 1 5 2002 K020198 ### Premarket Notification 510(k) ## Simidur S1S ### 5. 510 (k) Summary Submitter of 510(k): Wieland Dental + Technik GmbH & Co. KG Schwenninger Str. 13 D-75179 Pforzheim Germany Phone: +49-7231-3705-0 Contact person: Phone: Fax: e-mail: Dr. Gerhard Polzer +49-7231-3705-219 +49-7231-357959 gerhard.polzer@wieland-dental.de Date of Summary: Trade name: Simidur S1S 2001-12-14 Classification name: Product code: C.D.R section: Classification: Alloy, precious metal, for clinical use ETS 872.3060 Class II Legally marketed Argelite 58P equivalent device: 510(k) number: K 891320 #### Device description Simidur S1S is a palladium-base ceramic alloy (56,0% Palladium), intended for dental technicians to fabricate dental restorations. It has an indication which ranges from single crowns up to long span bridges with two or more pontics and to removable partials. It is free of copper and suitable for telescopic and milling work. Simidur S1S is highly corrosion resistant and has an excellent biocompatibility. It fully complies to the international standard ISO 9693 and fulfills the essential requirements of the European directive 93/42/ECC concerning medical devices. Simidur S1S can be veneered with suitable dental ceramics and with dental composites. {1}------------------------------------------------ ## DEPARTMENT OF HEALTH & HUMAN SERVICES Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health and Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is an emblem featuring a stylized bird-like figure with three wing-like shapes, representing the department's mission related to health and human well-being. #### Public Health Service Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 # MAR 1 5 2002 Dr. Gerhard Polzer Director, Regulatory Affairs Wieland Dental + Technik GmbH & Co. KG Schwenninger Strasse 13 75120 Pforzheim, GERMANY Re: K020195 Trade/Device Name: Simidur S1S Regulation Number: 872.3060 Regulation Name: Gold-Based Alloys and Precious Metal Alloys for Clinical Use Regulatory Class: Class II Product Code: EJS Dated: January 18, 2002 Received: January 22, 2002 Dear Dr. Polzer: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice. labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {2}------------------------------------------------ Page 2 - Dr. Gerhard Polzer Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html Sincerely yours, [signature] Timothy A. Ulatowski Director Division of Dental, Infection Control, and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ ## Page 1 of 1 # 510(k) Number (if known):_ Simidur S1S Device Name: Indications For Use: Simidur S1S is a palladium-base ceramic alloy that can be used by dental technicians to fabricate dental appliances for patients. K020195 It is intended for manufacturing - Crowns ● - Short span bridges . - Long span bridges - Removable partials . and can be used for - Telescopic and milling work ● Simidur S1S can be veneered with suitable dental ceramics as well as with dentalcomposites. (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) (Division Sign-Off) Division of Dental, Infection Control, and General Hospital Devices 510(k) Number K020195 Prescription Use (Per 21 CFR 801.109) OR Over-The-Counter Use........ (Optional Formal 1-2-96)
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...