(293 days)
The S.S. White Technologies 6500 Series Air Abrasion Devices are used for cavity preparation in Classes I, II, III, IV, and V. The uses include removal of tooth structure and restorative dental materials, and site preparation for pit and fissure sealant therapy and bonding of porcelain and ceramic. They are also used for restoration prophylaxis.
The 6500-D, 6500-E, and 6500-F are pneumatic devices which combine pressurized air and abrasive powder (e.g. aluminum oxide or sodium bicarbonate) to produce a high velocity stream of particles to perform dental restorative procedures. The abrasive particulate is delivered via a small handpiece which is approximately the size of a dental drill handpiece. The systems are designed for ease of service and maintenance with a readily accessible refillable container for the particulate supply.
This 510(k) summary does not contain information about acceptance criteria or a study that proves the device meets specific acceptance criteria. This submission is for a conventional medical device (dental instrument), not an AI/ML-enabled device, and therefore the regulatory requirements and documentation are different.
Specifically, the document focuses on demonstrating substantial equivalence to existing predicate devices based on intended use and technical specifications. It does not present performance metrics, clinical study results, or a detailed breakdown of acceptance criteria as would be expected for an AI/ML-driven diagnostic or treatment planning system.
Therefore, I cannot populate the table or answer the questions as requested, because the provided text does not contain the necessary information regarding acceptance criteria and performance studies. The core of this 510(k) summary is a declaration of substantial equivalence, not a detailed performance validation study against predefined criteria for an AI model.
The document states: "Since the intended use and technical specifications of the 6500-D, 6500-E, and 6500-F are virtually identical to the predicate devices, and the differences in the devices only serve to make them marketable, we believe the 6500 Series devices are substantially equivalent to the predicate devices and can be marketed under section 510(k) of the FD & C Act."
This highlights that the basis for approval is comparative equivalence, not a standalone performance study with specific metrics.
{0}------------------------------------------------
3/8/99
510(k) Summary
Company Name: S.S. White Technology, Inc. 151 Old New Brunswick Road Piscataway, NJ 08854
Company Contact, Regulatory Affairs: Dave Taylor S.S. White Technology, Inc. 151 Old New Brunswick Road Piscataway, NJ 08854 Phone: (732) 752-8300 ext 390 Fax: (732) 752-0698 E-mail: dataylor@gateway.net
Device Name:
6500 Series Air Abrasion Systems
Predicate Devices:
KV-1, K#940776 (Kreativ, San Diego, CA), Mach Series, K#980216 (Kreativ, San Diego, CA), K#921748 (American Dental Technologies, Troy, MI), Microetcher, K#902836 (Danville Engineering) and the MicroPrep Cavity Preparation System, K#932997 (Sunrise Technologies, Inc.)
Device and Indications for Use:
The 6500-D, 6500-E, and 6500-F are pneumatic devices which combine pressurized air and abrasive powder (e.g. aluminum oxide or sodium bicarbonate) to produce a high velocity stream of particles to perform dental restorative procedures. The abrasive particulate is delivered via a small handpiece which is approximately the size of a dental drill handpiece. The systems are designed for ease of service and maintenance with a readily accessible refillable container for the particulate supply.
The 6500-D, 6500-E, and 6500-F are used for cavity preparation in Classes I, II, III, IV, and V. The uses include removal of tooth structure and restorative dental materials, and site preparation for pit and fissure sealant therapy and bonding of porcelain and ceramic. They are also used for restoration prophylaxis.
Discussion:
Since the intended use and technical specifications of the 6500-D, 6500-E, and 6500-F are virtually identical to the predicate devices, and the differences in the devices only serve to make them marketable, we believe the 6500 Series devices are substantially equivalent to the predicate devices and can be marketed under section 510(k) of the FD & C Act.
{1}------------------------------------------------
Public Health Service
Image /page/1/Picture/2 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo is a circular emblem with the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the top half of the circle. Inside the circle is a stylized image of an eagle with three lines representing its wings and head.
SEP 2 9 1999
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
.
Mr. Dave Taylor S.S. White Technologies, Incorporated 151 Old New Brunswick Road Piscataway, New Jersey 08854-3761
K984415 Re : S.S. White Technologies, Models 6500-D, Trade Name: 6500-E, and 6500-F Requlatory Class: İII Product Code: KOJ Dated: November 26, 1998 December 10, 1998 Received:
Dear Mr. Taylor:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions The general controls provisions of the Act of the Act. include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II ' (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. ಗಳ substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
{2}------------------------------------------------
Page 2 - Mr. Taylor
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4692. Additionally, for questions on the promotion and advertising of your device, please contact Also, please note the Office of Compliance at (301) 594-4639. the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours
Timothy A. Ulatowski
Director Division of Dental, Infection Control, and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{3}------------------------------------------------
Indications Statement
510(k) submission: S.S. White Technologies 6500 Series Air Abrasion Devices
Indications for Use:
The S.S. White Technologies 6500 Series Air Abrasion Devices are used for cavity preparation in Classes I, II, III, IV, and V. The uses include removal of tooth structure and restorative dental materials, and site preparation for pit and fissure sealant therapy and bonding of porcelain and ceramic. They are also used for restoration prophylaxis.
Susan Runno
(Division Sign-Off) Division of Dental, Infection Control, and General Hospital Devices 24,2441 510(k) Number
- PRESCRIPTION
DEVICE
§ 872.6080 Airbrush.
(a)
Identification. An airbrush is an AC-powered device intended for use in conjunction with articulation paper. The device uses air-driven particles to roughen the surfaces of dental restorations. Uneven areas of the restorations are then identified by use of articulation paper.(b)
Classification. Class II. The special control for this device is International Electrotechnical Commission's IEC 60601-1-AM2 (1995-03), Amendment 2, “Medical Electrical Equipment—Part 1: General Requirements for Safety.”