Antimicrobial Susceptibility Test Discs are for the semi-quantitative susceptibility testing by agar diffusion test procedure of rapidly growing micro-organisms. These include : Enterobacteriaceae, Staphylococcus spp., and by modified procedures, Haemophilus influenzae.

Device Description

Oxoid Amoxicillin/Clavulanic Acid Susceptibility Test Disc

AI/ML Overview

The provided text is a 510(k) summary from the FDA for a medical device: "Amoxicillin/Clavulanic Acid Antimicrobial Susceptibility Test Disc." This document approves the device and states its intended use, but it does not contain information about acceptance criteria or the specific study that proves the device meets those criteria.

The 510(k) notification process establishes substantial equivalence to a predicate device, which implies that the device is as safe and effective as a legally marketed device. However, the details of the performance study (acceptance criteria, sample sizes, ground truth establishment, expert involvement, etc.) are typically found in the full 510(k) submission, not in the FDA's clearance letter or the brief 510(k) summary.

Therefore, I cannot provide the requested information based on the given input text. The text does not describe an acceptance criteria table, device performance reports, sample sizes, data provenance, number or qualifications of experts, adjudication methods, MRMC studies, standalone performance, types of ground truth, or details about training set ground truth.

The document only provides:

Device Name: Oxoid Amoxicillin/Clavulanic Acid Susceptibility Test Disc
Indication for Use: Semi-quantitative susceptibility testing by agar diffusion test procedure of rapidly growing micro-organisms, including Enterobacteriaceae, Staphylococcus spp., and by modified procedures, Haemophilus influenzae.

Summary

{0}------------------------------------------------

Image /page/0/Picture/2 description: The image shows the seal of the Department of Health & Human Services - USA. The seal is circular and contains the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. In the center of the seal is an abstract image of three faces in profile, stacked on top of each other. The faces are stylized and appear to be connected, possibly representing the interconnectedness of health and human services.

g 1998 SEP

Food and Drug Administration 2098 Gaither Road Rockville MD 20850

Andy Hollingsworth Quality Systems Manager Oxoid. Ltd. Wade Road Basingstoke Hants RG24 8PW England

Re: K982524

Trade Name: Amoxicillin/Clavulanic Acid Antimicrobial Susceptibility Test Disc Regulatory Class: II Product Code: JTN Dated: July 13, 1998 Received: July 20, 1998

Dear Mr. Hollingsworth:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration. listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.

{1}------------------------------------------------

Page 2

Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at (770)488-7655.

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4588. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll free number (800) 638-2041 or at (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html"

Sincerely yours,

Steven Sutman

Steven I. Gutman, M.D., M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

510(K) Submission for Oxoid Antimicrobial Susceptibility Test Disc

AMOXICILLIN/CLAVULANIC ACID

OXOID LTD

510(K) Number : Unknown

Device Name : Oxoid Amoxicillin/Clavulanic Acid Susceptibility Test Disc

Indication for Use :

Woody Dubois

n of Clinical Labor 510(k) Number.

Prescription Use X

Regulation Number and Section

§ 866.1620 Antimicrobial susceptibility test disc.

(a)
Identification. An antimicrobial susceptibility test disc is a device that consists of antimicrobic-impregnated paper discs used to measure by a disc-agar diffusion technique or a disc-broth elution technique the in vitro susceptibility of most clinically important bacterial pathogens to antimicrobial agents. In the disc-agar diffusion technique, bacterial susceptibility is ascertained by directly measuring the magnitude of a zone of bacterial inhibition around the disc on an agar surface. The disc-broth elution technique is associated with an automated rapid susceptibility test system and employs a fluid medium in which susceptibility is ascertained by photometrically measuring changes in bacterial growth resulting when antimicrobial material is eluted from the disc into the fluid medium. Test results are used to determine the antimicrobial agent of choice in the treatment of bacterial diseases.(b)
Classification. Class II (performance standards).