(34 days)
To maintain a nasal airway while providing septal support following surgery.
The Nasal Airway Splint is designed provide septal support and allow nasal breathing post-operatively through the integral airway. The splints can be sutured through the preformed holes in the anterior tips for stabilization. The Nasal Airway Splints are packaged as a pair (left side and right side) and are supplied sterile, ready to use.
The provided text is a 510(k) premarket notification for a medical device (Nasal Airway Splint). It describes the device, its intended use, and states that it has been determined substantially equivalent to a predicate device. However, it does not contain any information regarding acceptance criteria, performance studies, sample sizes, expert qualifications, ground truth establishment, or multi-reader multi-case studies.
Therefore, I cannot populate the table or answer the specific questions about device performance and validation studies. The document states "Testing: Device is constructed using well-established medical grade silicone," which implies material testing but not performance in a clinical or simulated clinical setting against specific acceptance criteria.
Based on the provided text, none of the requested information regarding acceptance criteria and the study proving the device meets them is available.
{0}------------------------------------------------
Image /page/0/Picture/0 description: The image shows the logo for Boston Medical Products. The logo consists of a stylized heart shape on the left, followed by the text "Boston Medical Products" stacked vertically. Below the text, there is a handwritten number "K972092".
SMDA Summary
This summary of 510(k) safety and effectiveness information is being submitted in accordance with the requirements of SMDA 1990 and 21 CFR 807.92.
Description: The Nasal Airway Splint is designed provide septal support and allow nasal breathing post-operatively through the integral airway. The splints can be sutured through the preformed holes in the anterior tips for stabilization. The Nasal Airway Splints are packaged as a pair (left side and right side) and are supplied sterile, ready to use.
Indication For Use: To maintain a nasal airway while providing septal support following surgery.
Contraindications: None known.
Predicate Device: Product No. 20-10500 manufactured by Invotec International, Inc., 11243-1 St. John's Industrial Parkway South, Jacksonville, FL 32246.
Testing: Device is constructed using well-established medical grade silicone.
itted by:
Submitted by:
Stuart K. Montgomery, President
Date:
Boston Medical Products, Inc. 117 Flanders Road, Westborough, MA 01581 USA CUSTOMER SERVICE: 1-800-433-BMPI (2674) Tel: 508-898-9300 Fax: 508-898-2373
, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
{1}------------------------------------------------
Image /page/1/Picture/0 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle or bird symbol with three curved lines representing its body and wings. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES USA" is arranged in a circular fashion around the bird symbol.
川 - 8 1997
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Stuart K. Montgomery President Boston Medical Products, Inc. 117 Flanders Road Westborough, MA 01581
Re: K972092 Nasal Airway Splint Dated: June 3, 1997 Received: June 4, 1997 Regulatory class: Unclassified Procode: 77 LYA
Dear Mr. Montgomery:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the interestated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (OS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours
W.Lilian Yin
Lillian Yin, Ph.D. Director, Division of Reproductive, Abdominal, Ear, Nose and Throat, and Radiological Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
Boston Medical Products, Inc. 117 Flanders Road Westborough, MA 01581 ATT: Stuart K. Montgomery (508) 898-9300 ext. 240 1. 1. 1. 1.
Page 1 of 1
510(k) Number (if known):
Device Name:
ట్టుకుంటా
Nasal Airway Splint
Indications For Use:
To maintain a nasal airway while providing septal support following surgery.
(PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Prescription Use
(Per 21 CFR 801.109)
OR
Over-The-Counter Use
(Optional Format 1-2-96)
(Division Sign-Off)
Division of Reproductive, Abdominal, ENT,
and Radiological Devices
510(k) Number K972092
§ 874.4780 Intranasal splint.
(a)
Identification. An intranasal splint is intended to minimize bleeding and edema and to prevent adhesions between the septum and the nasal cavity. It is placed in the nasal cavity after surgery or trauma. The intranasal splint is constructed from plastic, silicone, or absorbent material.(b)
Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 874.9.