(86 days)
No
The summary describes a physical silicone implant and does not mention any software, algorithms, or data processing that would indicate the use of AI or ML.
No
A therapeutic device intends to treat or mitigate a disease or condition. This device is used for cosmetic or reconstructive maxilla augmentation or reconstruction, which falls under aesthetic or structural purposes rather than treating a disease or condition.
No
The device is described as an implant used for augmentation or reconstruction, which is a therapeutic treatment rather than a diagnostic one.
No
The device description clearly states it is a silicone elastomer rubber implant, which is a physical hardware component.
No, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- Intended Use: The intended use is for augmenting or reconstructing the maxilla for cosmetic or reconstructive surgery. This is a surgical procedure performed directly on the patient's body.
- Device Description: The device is a silicone elastomer implant designed for implantation. This is a physical device placed inside the body.
- IVD Definition: In Vitro Diagnostics (IVDs) are tests performed on samples taken from the human body (like blood, urine, or tissue) to detect diseases, conditions, or infections.
This device is clearly an implantable medical device used in surgery, not a diagnostic test performed on samples outside the body.
N/A
Intended Use / Indications for Use
Duralastic Malr implants are intended for use in augmentation and reconstruction of the cheek. They are intended for insertion via an intraoral or cilliary incision.
The DuralaBtic Anatomical Chin Implants are intended to be used to augment or reconstruct the maxilla for cosmetic or reconstructive surgery .
Product codes
LZK
Device Description
Duralastic Malar implants are crescent shaped concave convex silicone elastomer rubber implants made from specially formulated silicone elastomers designed for implantation. They are manufactured in pairs with a mirror image left and right. The LSR 30 Implant Grade elastomer is Masterfiled at FDA and has been biocompatibility, mutagenicity, thoroughly tested -for carcinogenicity, and cytotoxicity. These referenced material characterizations are found in Applied Silicone's Master File MAF-562. The Duralastic Malar Implants will be provided sterile and nonsterile.
The Duralastic Malar implants are manufactured from Applied Silicone's LSR-30 part # 40029 which is a platinum cured dimethyl polysiloxane system. All chemical characterizations are found in Applied Masterfile MAF-562.
The physical properties are: Durometer 30 Shore A, Elongation 650%, Tensile Strength 950 PSI, tear strength Tear Die C 150 PSI, Specific Gravity 1.12, Modulus 300 PSI at 200% Elongation, Surface Smooth and Textured.
Duralastic Malar Implants are sterilized via gamma radiation cycles of 2.5 - 4.2 Meqarads. The validation of this cycle was designed and performed by STI of Brea, California. Sterigenics Corporation is the contract gamma sterilizer. The validation used Method i Testing as defined in the ANSI/AAMI/ISO 1137-1994 "Sterilization of
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
cheek, maxilla
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
Not Found
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s)
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 878.3550 Chin prosthesis.
(a)
Identification. A chin prosthesis is a silicone rubber solid device intended to be implanted to augment or reconstruct the chin.(b)
Classification. Class II.
0
K971479
Allied Biomedical Corporation 3850 Ramada Drive Paso Robles, CA 93446
JUL | 8 |997
TAB H
510 (k) SUMMARY
PRODUCT DESCRIPTION
Duralastic Malar implants are crescent shaped concave convex silicone elastomer rubber implants made from specially formulated silicone elastomers designed for implantation. They are manufactured in pairs with a mirror image left and right. The LSR 30 Implant Grade elastomer is Masterfiled at FDA and has been biocompatibility, mutagenicity, thoroughly tested -for carcinogenicity, and cytotoxicity. These referenced material characterizations are found in Applied Silicone's Master File MAF-562. The Duralastic Malar Implants will be provided sterile and nonsterile.
SUBSTANTIAL EQUIVALENCE
Under it original 510(k) K952707, Duralastic Malar implants were found SE to the Applied Biomedical malar implants. In fact the very same molds and materials used to produce the Duralastic Malar implants in the sterile form, because these molds were sold to Allied and Allied has not changed raw material suppliers.
INTENDED USE
Duralastic Malr implants are intended for use in augmentation and reconstruction of the cheek. They are intended for insertion via an intraoral or cilliary incision.
PHYSICAL AND CHEMICAL PROPERTIES
The Duralastic Malar implants are manufactured from Applied Silicone's LSR-30 part # 40029 which is a platinum cured dimethyl polysiloxane system. All chemical characterizations are found in Applied Masterfile MAF-562.
The physical properties are: Durometer 30 Shore A, Elongation 650%, Tensile Strength 950 PSI, tear strength Tear Die C 150 PSI, Specific Gravity 1.12, Modulus 300 PSI at 200% Elongation, Surface Smooth and Textured.
STERILIZATION CYCLE
Duralastic Malar Implants are sterilized via gamma radiation cycles of 2.5 - 4.2 Meqarads. The validation of this cycle was designed and performed by STI of Brea, California. Sterigenics Corporation is the contract gamma sterilizer. The validation used Method i Testing as defined in the ANSI/AAMI/ISO 1137-1994 "Sterilization of
1
DEPARTMENT OF HEALTH & HUMAN SERVICES
Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo features a stylized depiction of an eagle or bird with three overlapping profiles, suggesting a sense of community or collaboration. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" is arranged in a circular fashion around the bird symbol.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Mr. Gerald Hanson Regulatory Affairs Allied Biomedical Corporation 3850 Ramada Drive Paso Robles, California 93446
JUL 1 8 1997
K971478 Re:
Trade Name: Duralastic Anatomical Chin Implants Product Code: FWP
Trade Name: Duralastic Anatomical Malar Implants Product Code: LZK
Trade Name: Duralastic Anatomical Nasal Implants Product Code: ESR
Regulatory Class: II Dated: April 15, 1997 Received: April 23, 1997
Dear Mr. Hanson:
We have reviewed your Section 510(k) notification of intent to market the devices referenced above and we have determined the devices are substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the devices, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your devices are classified (see above) into either class II (Special Controls) or class III (Premarket Approval), they may be subject to such additional controls. Existing major regulations affecting your devices can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the
2
Page 2 - Mr. Gerald Hanson
current Good Manufacturing Practice requirements , as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. In addition, FDA may publish further announcements concerning your devices in the Federal Register. Please note: this response to your premarket notification submissions does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your devices as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your devices to a legally marketed predicate device results in a classification for your devices and thus, permits your devices to proceed to the market.
If you desire specific advice for your devices on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4595. Additionally, for questions on the promotion and advertising of your devices, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
to collefa
Celia M. Witten, Ph.D., M.D. Director Division of General and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
3
Page
510 k) Number K971479
Device Name Dyralastic Anatomical Malar Implants
lidications For Use:
The DuralaBtic Anatomical Chin Implants are intended to be used to augment or reconstruct the maxilla for cosmetic or reconstructive surgery .
(Division Sign-Off)
Division of General Restorative Devices
510(k) Number K97147
(ODE)
Prescription Use :Per 21 CFR 801 169)
OR
Concurrence of CDRH, Office of Device Evaluation,
Over-The Counter Use
(Optional Format 1-2-96)