K Number
K971405

Validate with FDA (Live)

Date Cleared
1997-06-16

(61 days)

Product Code
Regulation Number
862.1660
Age Range
All
Reference & Predicate Devices
N/A
Predicate For
N/A
AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticPediatricDiagnosticis PCCP AuthorizedThirdpartyExpeditedreview
Intended Use

Speciality Urine 1,2 is used to monitor miscellaneous specialized urine constituents and bone resorption test procedures.

Device Description

Not Found

AI/ML Overview

This is a 510(k) premarket notification for "Speciality Urine 1,2," which is a quality control material intended to monitor miscellaneous specialized urine constituents and bone resorption test procedures. The provided documents do not contain information about acceptance criteria or a study proving the device meets acceptance criteria.

The available documents are administrative in nature, including:

  • A summary detailing the submitter's information, classification, intended use, and predicate devices.
  • An FDA letter granting substantial equivalence.
  • An "Indications For Use" form.

Therefore, I cannot provide the requested information as it is not present in the given text.

If this information were available in a different part of the submission, it would typically include details such as:

  1. A table of acceptance criteria and the reported device performance: This would list specific analytes, their target ranges, and the actual performance of the Speciality Urine 1,2 in comparison to those ranges.
  2. Sample size used for the test set and the data provenance: This would describe how many samples of Speciality Urine 1,2 were tested, where the data originated (e.g., in-house lab, external lab), and if it was retrospective or prospective testing.
  3. Number of experts used to establish the ground truth for the test set and the qualifications: Not usually applicable for a quality control material. Ground truth for QC materials is often established by reference methods or manufacturing specifications.
  4. Adjudication method: Not applicable for a quality control material.
  5. Multi-reader multi-case (MRMC) comparative effectiveness study: Not applicable for a quality control material. This type of study assesses how human readers perform with or without AI assistance, which is irrelevant for a QC solution.
  6. Standalone (algorithm only without human-in-the-loop performance) study: This would involve testing the QC material's performance on automated analyzers without human intervention, which is common for IVD devices.
  7. The type of ground truth used: For a quality control material, the ground truth would typically be the assigned values (e.g., mean and range) for each analyte, established through rigorous testing against reference methods or extensive batch analysis.
  8. The sample size for the training set: Not directly applicable in the same way as for an AI/algorithm-based device. For QC materials, "training" might refer to the extensive testing during manufacturing and value assignment processes.
  9. How the ground truth for the training set was established: Again, this would relate to the process of assigning target values and ranges to the QC material constituents, usually involving multiple assays, reference methods, and statistical analysis by the manufacturer.

{0}------------------------------------------------

K971405

CHIRON | DIAGNOSTICS

Chiron Diagnostics Corporation 17392 Daimler Street Irvine, California 92614-5512 714.261.3058 - Fax 714.261.2294

JUN 1 6 1997

SUMMARY

510(k) FOR CHIRON DIAGNOSTICS SPECIALITY URINE 1,2

    1. Submitter's name, etc.
      Chiron Diagnostics Corporation 17392 Daimler St. Irvine, CA 92614

Contact: Dr. Ronald D. Schaefer

Telephone: 714-261-3009 FAX: 714-261-2294

April 10, 1997

  • Classification Name: CONTROLS MULTIANALYTE CONTROLS, ALL KINDS 2. (ASSAYED AND UNASSAYED)
    Common/Usual Name: QUALITY CONTROL MATERIAL

Proprietary Name: Speciality Urine 1,2

  • Intended Use: Speciality Urine 1,2 is used to monitor miscellaneous 3. specialized urine constituents and bone resorption test procedures.
    1. Predicate:
    • Beta 2-Micro globulin: Pharmacia 1.
      1. Bladder Tumor Antigen: Bard Diagnostic Sciences
      1. C-telopeptide: Diagnostic Systems Laboratories, Inc.
    • Creatinine: Ciba Corning Urine 1,2 র্বা
    • ട. Deoxypyridonoline (DPD): Chiron ACS 180
      1. DPD & PYD: Metra Biosystems, Inc.
      1. N-telopeptide (NTX): Ostex

{1}------------------------------------------------

Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo is circular and contains the text "DEPARTMENT OF HEALTH & HUM SERVICES - USA" around the perimeter. In the center of the logo is a stylized image of an eagle.

Food and Drug Administration 2098 Gaither Road Rockville MD 20850

JUN 16 1997

Ronald D. Schaefer, Ph.D. Manager QA/RA Chiron Diagnostics Corporation 17392 Daimler Street Irvine, California 92614-5512

Re : K971405 Speciality Urine 1, 2 Regulatory Class: I Product Code: JJY Dated: April 14, 1997 Received: April 16, 1997

Dear Dr. Schaefer:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Druq, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices :- General-(GMP) requlation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.

{2}------------------------------------------------

Page 2

Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at (770) 488-7655.

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4588. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.qov/cdrh/dsmamain.html".

sincerely yours,
Steven Gutman

Steven I. Gutman, M.D., M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radioloqical Health

Enclosure

{3}------------------------------------------------

Page _ 1 _ of _ 1

Ippendi

g

Append

C

Arnandix

opendix

510(k) Number:

Device Name: Speciality Urine 1,2

Indications For Use:

Speciality Urine 1,2 is used to monitor miscellaneous specialized urine constituents and bone resorption test procedures.

(PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRJ, Office of Device Evaluation (ODE)

Prescription Use ﺎ Per 21 CFR §801.109)

OR

Over-The-Counter Use (Optional Format 1-2-96)

(Division Sign-Off)
Division of Clinical Laboratory Devices
510(k) Number

§ 862.1660 Quality control material (assayed and unassayed).

(a)
Identification. A quality control material (assayed and unassayed) for clinical chemistry is a device intended for medical purposes for use in a test system to estimate test precision and to detect systematic analytical deviations that may arise from reagent or analytical instrument variation. A quality control material (assayed and unassayed) may be used for proficiency testing in interlaboratory surveys. This generic type of device includes controls (assayed and unassayed) for blood gases, electrolytes, enzymes, multianalytes (all kinds), single (specified) analytes, or urinalysis controls.(b)
Classification. Class I (general controls). Except when intended for use in donor screening tests, quality control materials (assayed and unassayed) are exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 862.9.