(106 days)
For illumination and irrigation/aspiration during surgery.
The American Medical Devices, Inc 19 and 20 ga. Endolight™ End Irrigating Endo-Illuminators are for illumination and irrigation during surgery. It consists of a stainless steel needle, delrin handpiece, PMMA fiberoptic fiber with plastic cladding, aluminum connector, and silastic tubing with luer lock connector. It connects to any conventional light source via an aluminum accessory adapter, which is packaged separately. This device also connects to any standard syringe with a male luer lock. The surgeon can then use the device to irrigate and aspirate while illuminating.
The provided text describes a premarket notification (510(k)) for the American Medical Devices, Inc., 19 and 20 Ga. Endolight™ End Irrigating Endo-Illuminator. However, it does not contain information about acceptance criteria or a study proving the device meets those criteria.
This submission is focused on demonstrating substantial equivalence to existing legally marketed devices, rather than establishing performance against specific acceptance criteria through a clinical or performance study. The core of this 510(k) is a comparison of design features, materials, and intended use with predicate devices.
Therefore, I cannot provide the requested information from the given text as it is not present. The document focuses on regulatory approval based on equivalence, not on a detailed performance study with acceptance criteria.
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image shows the logo for American Medical Devices, Inc. On the left side of the logo, the letters "A MDI" are displayed in a square. The letter "A" is white and on a black background, while the letters "MDI" are black and on a white background. To the right of the square, the words "AMERICAN MEDICAL DEVICES, Inc." are stacked vertically.
JUN 2 4 1997
1100 Northside Drive Atlanta, Georgia 30318
February 27, 1997
Premarket Notification [510(k)] Summary
Submitter: American Medical Devices, Inc 1100 Northside Drive Atlanta, GA 30318 Phone: (404) 815-5233 Fax: (404) 815-5235
Official Correspondent: Frank J. Tighe
Trade Name: The American Medical Devices, Inc., 19 and 20 Ga. Endolight™ End Irrigating Endo-Illuminator.
Common Name: Fiberoptic End Irrigating Endo-Illuminator
Registration Number: We have registered but have not received our application back as of this date.
Class: Class II
Class Name: We were unable to find the device listed in the classification regulations, 21 CFR Parts 862-892 [807.87 (c)]
Panel: Ophthalmic
Product Code: MPA
Page 1 Summary
{1}------------------------------------------------
Device Description: The American Medical Devices, Inc 19 and 20 ga. Endolight™ End Irrigating Endo-Illuminators are for illumination and irrigation during surgery. It consists of a stainless steel needle, delrin handpiece, PMMA fiberoptic fiber with plastic cladding, aluminum connector, and silastic tubing with luer lock connector. It connects to any conventional light source via an aluminum accessory adapter, which is packaged separately. This device also connects to any standard syringe with a male luer lock. The surgeon can then use the device to irrigate and aspirate while illuminating. Please see Device Replica Diagram in Annendix C.
Statement of indications for use. - For illumination and irrigation/aspiration during surgery.
Substantial Equivalence Comparison
| Substantial Equivalence Comparison | American MedicalDevices, Inc. | Gamp && Assoc | Grieshaber | Infinitech |
|---|---|---|---|---|
| PackagingTyvek to Poly | X | X | X | X |
| For irrigation/illuminationDuring surgery | X | X | X | X |
| Materials: Stainless Steel Needle,PMMA Fiberoptic Fiber, DelrinHandpiece, Luer Lock Connector,Silastic Tubing | X | X | X | X |
| Aluminum Connector | X | X | X | X |
| Sterilization ETO | X | X | X | X |
Sterility
The Device will be ETO Sterilized.
The method used to validate the sterilization cycle is AAMI Overkill Method
Packaging Material: Tyvek Pouch with a Ploymylar Sheath.
The SAL is 10 to the -6.
The maximum levels of residues of ethylene oxide: 25 parts per million; ethylene chlorohydrin: 25 parts per million and ethylene glycol: 250 parts per million.
This device is non-pyrogenic and the LAL Method is used to make that determination.
Pyrogens: We control the manufacturing environment to lessen the likelihood of pyrogen causing bacteria. In addition the LAL Method is used to determine that each lot is non-pyrogenic.
Page 2 Summary
{2}------------------------------------------------
Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo is circular and contains the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. In the center of the circle is an abstract image of an eagle.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
דחרון א 2 MMI.
Mr. Frank ]. Tighe ... American Medical Devices, Inc. 1100 Northside Dr. Atlanta, GA 30318
- Re: K970882
Trade Name: Endolight™ End Irrigating Endo-Illuminator (19 and 20 GA.) Regulatory Class: II Product Code: 86 MPA Dated: June 9, 1997 Received: June 13, 1997
Dear Mr. Tighe:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
{3}------------------------------------------------
Page 2 - Mr. Frank J. Tighe
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus; permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
A Ralph Rosenthal
A. Ralph Rosenthal, M.D. Director Division of Ophthalmic Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
Image /page/4/Picture/1 description: The image shows the logo for American Medical Devices, Inc. The logo is divided into two sections. The left section has a white square with a large black letter A, and a black square with the letters MDI in white. The right section has the words AMERICAN MEDICAL DEVICES, Inc. in black.
1100 Northside Drive Atlanta, Georgia 30318
(510(k) Number (if known): K970882
Device Name: Endolight™ End Irrigating Endo-Illuminator (19 and 20 Ga.)
Indications for Use:
For illumination and irrigation/aspiration during surgery.
PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Prescription Use X (Per 21 CFR 801.109)
OR
Bruce Dunn
Over-The-Counter Use
(Optiona! Format 1-2-96)
(Division Sign-Off) Division of Ophthalmic Devices 510(k) Number
Dil-Free -793-1473
Direct 404-815-5233
Facsimile 404-815-5235
Internet ftighe@americanmedicaldevices.com
§ 876.1500 Endoscope and accessories.
(a)
Identification. An endoscope and accessories is a device used to provide access, illumination, and allow observation or manipulation of body cavities, hollow organs, and canals. The device consists of various rigid or flexible instruments that are inserted into body spaces and may include an optical system for conveying an image to the user's eye and their accessories may assist in gaining access or increase the versatility and augment the capabilities of the devices. Examples of devices that are within this generic type of device include cleaning accessories for endoscopes, photographic accessories for endoscopes, nonpowered anoscopes, binolcular attachments for endoscopes, pocket battery boxes, flexible or rigid choledochoscopes, colonoscopes, diagnostic cystoscopes, cystourethroscopes, enteroscopes, esophagogastroduodenoscopes, rigid esophagoscopes, fiberoptic illuminators for endoscopes, incandescent endoscope lamps, biliary pancreatoscopes, proctoscopes, resectoscopes, nephroscopes, sigmoidoscopes, ureteroscopes, urethroscopes, endomagnetic retrievers, cytology brushes for endoscopes, and lubricating jelly for transurethral surgical instruments. This section does not apply to endoscopes that have specialized uses in other medical specialty areas and that are covered by classification regulations in other parts of the device classification regulations.(b)
Classification —(1)Class II (special controls). The device, when it is an endoscope disinfectant basin, which consists solely of a container that holds disinfectant and endoscopes and accessories; an endoscopic magnetic retriever intended for single use; sterile scissors for cystoscope intended for single use; a disposable, non-powered endoscopic grasping/cutting instrument intended for single use; a diagnostic incandescent light source; a fiberoptic photographic light source; a routine fiberoptic light source; an endoscopic sponge carrier; a xenon arc endoscope light source; an endoscope transformer; an LED light source; or a gastroenterology-urology endoscopic guidewire, is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 876.9.(2) Class I for the photographic accessories for endoscope, miscellaneous bulb adapter for endoscope, binocular attachment for endoscope, eyepiece attachment for prescription lens, teaching attachment, inflation bulb, measuring device for panendoscope, photographic equipment for physiologic function monitor, special lens instrument for endoscope, smoke removal tube, rechargeable battery box, pocket battery box, bite block for endoscope, and cleaning brush for endoscope. The devices subject to this paragraph (b)(2) are exempt from the premarket notification procedures in subpart E of part 807of this chapter, subject to the limitations in § 876.9.