(293 days)
The SBC1 Cream is a skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. Not to be used on breached or compromised skin or open sores.
SBC1 Cream is a fragrance free, preserved, non-sterile, topical skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. SBC1 Cream supports a moist environment. SBC1 Cream is provided prescription only in various sizes for single patient use.
N/A
U.S. Food & Drug Administration 510(k) Clearance Letter
Page 1
U.S. Food & Drug Administration
10903 New Hampshire Avenue
Silver Spring, MD 20993
www.fda.gov
Doc ID # 04017.08.02
January 12, 2026
SiOxMed, LLC
℅ Jennifer Daudelin
Director, MedTech Regulatory Affairs
ProPharma
107 West Hargett St.
Raleigh, North Carolina 27601
Re: K250890
Trade/Device Name: SBC1 Cream
Regulatory Class: Unclassified
Product Code: FRO
Dated: January 2, 2026
Received: January 2, 2026
Dear Jennifer Daudelin:
We have reviewed your section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (the Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database available at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Additional information about changes that may require a new premarket notification are provided in the FDA guidance documents entitled "Deciding When to Submit a 510(k) for a Change to an Existing Device" (https://www.fda.gov/media/99812/download) and "Deciding When to Submit a 510(k) for a Software Change to an Existing Device" (https://www.fda.gov/media/99785/download).
Page 2
January 12, 2026
SiOxMed, LLC
℅ Jennifer Daudelin
Director, MedTech Regulatory Affairs
ProPharma
107 West Hargett St.
Raleigh, North Carolina 27601
Re: K250890
Trade/Device Name: SBC1 Cream
Regulatory Class: Unclassified
Product Code: FRO
Dated: January 2, 2026
Received: January 2, 2026
Dear Jennifer Daudelin:
We have reviewed your section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (the Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database available at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Additional information about changes that may require a new premarket notification are provided in the FDA guidance documents entitled "Deciding When to Submit a 510(k) for a Change to an Existing Device" (https://www.fda.gov/media/99812/download) and "Deciding When to Submit a 510(k) for a Software Change to an Existing Device" (https://www.fda.gov/media/99785/download).
Your device is also subject to, among other requirements, the Quality System (QS) regulation (21 CFR Part 820), which includes, but is not limited to, 21 CFR 820.30, Design controls; 21 CFR 820.90, Nonconforming product; and 21 CFR 820.100, Corrective and preventive action. Please note that regardless of whether a change requires premarket review, the QS regulation requires device manufacturers to review and approve changes to device design and production (21 CFR 820.30 and 21 CFR 820.70) and document changes and approvals in the device master record (21 CFR 820.181).
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR Part 803) for devices or postmarketing safety reporting (21 CFR Part 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reporting-combination-products); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR Part 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR Parts 1000-1050.
All medical devices, including Class I and unclassified devices and combination product device constituent parts are required to be in compliance with the final Unique Device Identification System rule ("UDI Rule"). The UDI Rule requires, among other things, that a device bear a unique device identifier (UDI) on its label and package (21 CFR 801.20(a)) unless an exception or alternative applies (21 CFR 801.20(b)) and that the dates on the device label be formatted in accordance with 21 CFR 801.18. The UDI Rule (21 CFR 830.300(a) and 830.320(b)) also requires that certain information be submitted to the Global Unique Device Identification Database (GUDID) (21 CFR Part 830 Subpart E). For additional information on these requirements, please see the UDI System webpage at https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/unique-device-identification-system-udi-system.
Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-devices/medical-device-safety/medical-device-reporting-mdr-how-report-medical-device-problems.
Page 3
For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100).
Sincerely,
MUSTAFA A. MAZHER -S
For Yu-Chieh Chiu, Ph.D.
Assistant Director
DHT4B: Division of Plastic and
Reconstructive Surgery Devices
OHT4: Office of Surgical and
Infection Control Devices
Office of Product Evaluation and Quality
Center for Devices and Radiological Health
Enclosure
Page 4
FORM FDA 3881 (8/23)
Page 1 of 1
PSC Publishing Services (301) 443-6740 EF
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
Indications for Use
Form Approved: OMB No. 0910-0120
Expiration Date: 07/31/2026
See PRA Statement below.
510(k) Number (if known)
K250890
Device Name
SBC1 Cream
Indications for Use (Describe)
The SBC1 Cream is a skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. Not to be used on breached or compromised skin or open sores.
Type of Use (Select one or both, as applicable)
☒ Prescription Use (Part 21 CFR 801 Subpart D)
☐ Over-The-Counter Use (21 CFR 801 Subpart C)
CONTINUE ON A SEPARATE PAGE IF NEEDED.
This section applies only to requirements of the Paperwork Reduction Act of 1995.
DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.
The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:
Department of Health and Human Services
Food and Drug Administration
Office of Chief Information Officer
Paperwork Reduction Act (PRA) Staff
PRAStaff@fda.hhs.gov
"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
Form Approved: OMB No. 0910-0120
Expiration Date: 07/31/2026
See PRA Statement below.
Indications for Use
510(k) Number (if known)
K250890
Device Name
SBC1 Cream
Indications for Use (Describe)
The SBC1 Cream is a skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. Not to be used on breached or compromised skin or open sores.
Type of Use (Select one or both, as applicable)
☒ Prescription Use (Part 21 CFR 801 Subpart D)
☐ Over-The-Counter Use (21 CFR 801 Subpart C)
CONTINUE ON A SEPARATE PAGE IF NEEDED.
This section applies only to requirements of the Paperwork Reduction Act of 1995.
DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.
The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:
Department of Health and Human Services
Food and Drug Administration
Office of Chief Information Officer
Paperwork Reduction Act (PRA) Staff
PRAStaff@fda.hhs.gov
"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."
FORM FDA 3881 (8/23)
Page 1 of 1
PSC Publishing Services (301) 443-6740 EF
Page 5
510(k) Summary
[AS REQUIRED BY 21 CFR 807.92]
K250890
Page 1 of 3
Sponsor: SiOxMed, LLC
2452 Salem Park Drive
Winston Salem, NC 27127
(336) 551-2209
Contact: Jennifer A. Daudelin, M.S.J.
ProPharma MedTech
107 West Hargett St.
Raleigh, NC 27601
Ph: 347-954-0395
Email: jennifer.daudelin@propharmagroup.com
Date Prepared: January 6, 2026
Proposed Class: Unclassified
Trade Name: SBC1 Cream
Common Name: Cream
Product Codes: FRO
Predicate Device(s):
| 510(k) Number | Manufacturer | Device Name | Procode | Class |
|---|---|---|---|---|
| K242406 | SiOxMed, LLC | SiOxC Cream | FRO | Unclassified |
Indications for Use
The SBC1 Cream is a skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. Not to be used on breached or compromised skin or open sores.
Device Description
SBC1 Cream is a fragrance free, preserved, non-sterile, topical skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. SBC1 Cream supports a moist environment. SBC1 Cream is provided prescription only in various sizes for single patient use.
Comparison of Technological Characteristics
The SBC1 Cream has the same indications for use and similar formulation and ingredients as compared with the predicate device. The bench testing demonstrates that the performance characteristics of the SBC1 Cream are equivalent to the legally marketed predicate, and therefore
Page 6
K250890
Page 2 of 3
supports a determination of Substantial Equivalence for the proposed indications for use.
The table below compares the SBC1 characteristics to the predicate device.
| Product Characteristic | Subject Device SBC1 Cream | Predicate Device SiOxC Cream |
|---|---|---|
| 510(k) Number | K250890 | K242406 |
| Regulation | Unclassified | Unclassified |
| Product Code | FRO | FRO |
| Indications for Use | SBC1 Cream is a skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. Not to be used on Breached or Compromised skin or open sores. | SiOxC Cream is a skin emulsion indicated for management of pruritus and dryness of skin in atopic dermatitis and allergic contact dermatitis. Not to be used on Breached or Compromised skin or open sores. |
| Principle of Operation | Promotes a moist environment | Promotes a moist environment |
| Composition | A water-based formulation containing emollients, humectants, structural and stabilizing agents, pH adjusters, surfactants/emulsifiers, antioxidants, and preservatives. The formulation includes a proprietary amorphous hydrated silica. | A water-based formulation containing emollients, humectants, structural and stabilizing agents, pH adjusters, surfactants/emulsifiers, antioxidants, and preservatives. The formulation includes a proprietary amorphous hydrated silica. |
| Preservative | Phenoxyethanol | Phenoxyethanol |
| Available offerings | 1oz and 8oz jar | 1oz and 8oz jar |
| Application | 2 times per day | 2 times per day or as needed |
| Single Patient Use | Yes | Yes |
| Sterility | Non-sterile | Non-sterile |
| Biocompatibility | Biocompatible | Biocompatible |
Performance Data – Non-Clinical
Biocompatibility
The SBC1 Cream was found to be biocompatible in accordance with ISO 10993-1 for its intended use when tested in compliance with ISO 10993-5, ISO 10993-10, ISO 10993-11, and ISO 10993-23.
Performance Testing
USP preservative effectiveness testing demonstrates the chosen preservative is performing as intended and appropriate for product formulation. Verification testing of the subject device was conducted to confirm that the modifications did not adversely affect device performance. Testing
Page 7
K250890
Page 3 of 3
includes the following:
| Testing Parameter | Results |
|---|---|
| Color / Visual appearance | Per specification |
| Odor / Scent characteristics | Per specification |
| Formula Appearance | Per specification |
| Product / Package Compatibility | Per specification |
| Package Appearance | Per specification |
| pH | Per specification |
| Viscosity | Per specification |
Preservative testing
| Preservative Challenge Testing | Standard | Results |
|---|---|---|
| Preservative Effectivess | Per USP <51> | PASS |
Bioburden / Microbial testing
| Testing Parameter | Standard | Specifications | Results |
|---|---|---|---|
| Total Plate Count (APC) | USP <61>/<62> | <100 cfu/g | PASS |
| Yeast & Mold (Sab Dextrose) | USP <61>/<62> | <100 cfu/g | PASS |
Conclusions
Based on the similarities of the intended use / indications for use, technological characteristics and results of non-clinical performance testing, the subject device, SBC1 Cream, is substantially equivalent to the predicate device, SiOxC Cream, K242406.
N/A