(590 days)
(1) Femur Reconstruction Interlocking Nail System
The Femur Reconstruction Interlocking Nail System is intended to stabilize femoral shaft fractures, subtrochanteric fractures, ipsilateral neck/shaft fractures, impending pathologic fractures, non-unions and malunions.
(2) Femur Retrograde Interlocking Nail System
The Femur Retrograde Interlocking Nail System is indicated for simple long bone fractures: severely comminuted, spiral, large oblique and segmental fractures; nonunions; polytrauma and multiple fractures; prophylactic nailing of impending pathologic fractures; reconstruction, following tumor resection and grating; supracondylar fractures; bone lengthening and shortening. Interlocking intramedullary nails are indicated for fixation of fractures that occur in and between the proximal and distal third of long bones being treated.
(3) Humerus Interlocking Nail System
The Humerus Interlocking Nail System indicated for fractures of the proximal humerus, including 2-part surgical neck fractures, 3-part fractures, and 4-part fractures with diaphyseal extension, diaphyseal extension, diaphyseal fractures of the humeral shaft, and impending pathologic humeral fractures.
(4) Tibia Interlocking Nail System
The Tibia Interlocking Nail System is intended to stabilize fractures of the proximal and distal thatt; open and closed tibial shaft fractures; certain pre- and post-isthmic fractures; and tibial malunions and non- unions.
(5) Compression Hip Nail System
The Compression Hip Nail System is intended to treat stable proximal femoral fracture including Pertrochanteric fractures, Intertrochanteric fractures and High sub trochanteric fractures and combination of these fractures.
This intramedullary fixation rod is used for stabilization of shaft fracture in humeral bone, femoral bone and tibial bone. It is implanted into medullary cavity inside of the long bone (humeral bone, femoral bone and tibial bone) with a fracture and the fractured long bone (humeral bone, femoral bone and tibial bone) is fixed to the nail by using the locking screw at the upper and lower parts of the fractured part.
The nailing system consists of the Femur Reconstruction Interlock Nail System, Femur Retrograde Interlocking Nail System, Humerus Interlocking Nail System, Tibia Interlocking Nail System, and Compression Hip Nailing System.
The provided document is a 510(k) premarket notification FDA clearance letter for an intramedullary fixation rod system. It does not contain any information about acceptance criteria, device performance, study design, or ground truth establishment.
Therefore, I cannot fulfill your request to describe the acceptance criteria and the study that proves the device meets them based solely on the provided text. The document is concerned with demonstrating substantial equivalence to a predicate device, primarily through non-clinical testing and comparison of technical characteristics, rather than reporting on a clinical or performance study with defined acceptance criteria.
The relevant sections explicitly state:
- "Clinical Test Conclusion: Clinical testing was not required for this submission."
- "Non-clinical Test Conclusion: The following properties were tested based on the referenced standards. All the test results support substantial equivalence to the predicate devices." (lists biological and mechanical standards).
To answer your questions, I would need a different document, such as a summary of safety and effectiveness data or a clinical study report.
§ 888.3020 Intramedullary fixation rod.
(a)
Identification. An intramedullary fixation rod is a device intended to be implanted that consists of a rod made of alloys such as cobalt-chromium-molybdenum and stainless steel. It is inserted into the medullary (bone marrow) canal of long bones for the fixation of fractures.(b)
Classification. Class II.