K Number
K190074
Device Name
Presero 3D Scanning System
Manufacturer
Date Cleared
2019-02-14

(29 days)

Product Code
Regulation Number
892.2050
AI/MLSaMDIVD (In Vitro Diagnostic)TherapeuticDiagnosticis PCCP AuthorizedThirdparty
Intended Use
The Presero 3D Scanning System is an imaging tool that allows the processing, review, analysis, communication and media interchange of multi-dimensional digital images acquired from a 3D imaging device. It is indicated for the use of capturing visual images to measure the diameter, surface area, perimeter and volume of wounds. The Presero 3D Scanning System is designed for use by health care professionals and is intended to assist the healthcare professional who is responsible for making all final patient management decisions.
Device Description
The Presero 3D Scanning System is a tablet-based system that allows the processing, review, analysis, communication and media interchange of multi-dimensional digital images acquired from a 3D imaging device. The Presero 3D Scanning System, does not contact the patient, nor does it control any life sustaining devices. A physician, providing ample opportunity for competent human intervention interprets images and information being displayed and printed. The Presero 3D Scanning System is comprised of a commercial off the shelf 3D camera fitted on a commercial off the shelf tablet, equipped with a proprietary software application that enables a health care professional to visualize and interact with 3D wound images, via a pen-like stylus, to assist in clinical decision making. The complete system (tablet, camera and software) integrates with a cloud back-end system. The cloud back-end system stores all patient data, operator details and other information allowing 2-way synchronization between the Presero 3D Scanning System and the cloud with the ability to fully support multiple systems within a single clinical facility.
More Information

No
The summary describes image processing and measurement capabilities but does not mention AI, ML, or related concepts like deep learning, neural networks, or training/test sets for algorithmic models.

No
The device is described as an "imaging tool" used to "measure the diameter, surface area, perimeter and volume of wounds" and assist in "clinical decision making" by healthcare professionals. It does not provide any treatment or therapy itself.

Yes

The device is indicated for capturing visual images to measure wound parameters (diameter, surface area, perimeter, volume) to assist healthcare professionals in clinical decision making. This information is used for diagnostic purposes.

No

The device description explicitly states that the system is comprised of a "commercial off the shelf 3D camera fitted on a commercial off the shelf tablet, equipped with a proprietary software application". This indicates the device includes hardware components (camera and tablet) in addition to the software.

Based on the provided information, the Presero 3D Scanning System is not an In Vitro Diagnostic (IVD).

Here's why:

  • IVDs analyze specimens from the human body. The core function of an IVD is to examine samples like blood, urine, tissue, etc., to provide information about a person's health.
  • The Presero system analyzes external images. The system acquires multi-dimensional digital images from a 3D imaging device (a camera) that captures the external surface of a wound. It does not process or analyze any biological specimens taken from the patient.
  • The intended use is for external wound measurement. The stated intended use is to measure the diameter, surface area, perimeter, and volume of wounds based on visual images. This is an external measurement and analysis, not an in vitro test.

The device is clearly an imaging and image processing system intended for external clinical assessment, not for analyzing biological samples.

N/A

Intended Use / Indications for Use

The Presero 3D Scanning System is an imaging tool that allows the processing, review, analysis, communication and media interchange of multi-dimensional digital images acquired from a 3D imaging device. It is indicated for the use of capturing visual images to measure the diameter, surface area, perimeter and volume of wounds. The Presero 3D Scanning System is designed for use by health care professionals and is intended to assist the healthcare professional who is responsible for making all final patient management decisions.

Product codes (comma separated list FDA assigned to the subject device)

LLZ, FXN

Device Description

The Presero 3D Scanning System is a tablet-based system that allows the processing, review, analysis, communication and media interchange of multi-dimensional digital images acquired from a 3D imaging device.
The Presero 3D Scanning System, does not contact the patient, nor does it control any life sustaining devices. A physician, providing ample opportunity for competent human intervention interprets images and information being displayed and printed.
The Presero 3D Scanning System is comprised of a commercial off the shelf 3D camera fitted on a commercial off the shelf tablet, equipped with a proprietary software application that enables a health care professional to visualize and interact with 3D wound images, via a pen-like stylus, to assist in clinical decision making.
The complete system (tablet, camera and software) integrates with a cloud back-end system. The cloud back-end system stores all patient data, operator details and other information allowing 2-way synchronization between the Presero 3D Scanning System and the cloud with the ability to fully support multiple systems within a single clinical facility.

Mentions image processing

Yes

Mentions AI, DNN, or ML

Not Found

Input Imaging Modality

Intel RealSense 3D camera

Anatomical Site

Wounds (Implicit)

Indicated Patient Age Range

Not Found

Intended User / Care Setting

Health Care Professionals
Healthcare Facilities such as hospitals and clinics

Description of the training set, sample size, data source, and annotation protocol

Not Found

Description of the test set, sample size, data source, and annotation protocol

Not Found

Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)

Every specification of the Presero® 3D Scanning Software has been validated according to the company's documented development and test procedures. The verification and validation testing conducted included testing to the following applicable standards:
ISO/IEC/IEEE 29148:2011, Systems and software Engineering — Life Cycle Processes — Requirements Engineering ISO/IEC/IEEE 24765:2010 - Systems and software engineering - Vocabulary IEC 62304:2006+AMD1:2015 CSV, Medical Device software – software Life-Cycle Processes NEMA PS 3.1 - 3.20 (2016), Digital Imaging and Communications in Medicine (DICOM) Set PS 3.1 IEC 60601-1-2 Edition 4.0 2014-02 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests ANSI AAMI ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text) Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005, MOD)
Verification and validation testing were completed in accordance with the company's Design Control process in compliance with 21 CFR Part 820.30, which included testing that fulfills the requirements of FDA "Guidance on Software Contained in Medical Devices". Potential risks were analyzed and satisfactorily mitigated in the device design. Verification and validation was performed on qualified device as well as in simulated use conditions
Results of performance testing demonstrated that the device met the design requirements and as well as the user needs

Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)

Not Found

Predicate Device(s): If the device was cleared using the 510(k) pathway, identify the Predicate Device(s) K/DEN number used to claim substantial equivalence and list them here in a comma separated list exactly as they appear in the text. List the primary predicate first in the list.

EchoPixel True 3D Viewer (K142107)

Reference Device(s): Identify the Reference Device(s) K/DEN number and list them here in a comma separated list exactly as they appear in the text.

Woundvision® Wound Measuring and Monitoring device (K131596)

Predetermined Change Control Plan (PCCP) - All Relevant Information for the subject device only (e.g. presence / absence, what scope was granted / cleared under the PCCP, any restrictions, etc).

Not Found

§ 892.2050 Medical image management and processing system.

(a)
Identification. A medical image management and processing system is a device that provides one or more capabilities relating to the review and digital processing of medical images for the purposes of interpretation by a trained practitioner of disease detection, diagnosis, or patient management. The software components may provide advanced or complex image processing functions for image manipulation, enhancement, or quantification that are intended for use in the interpretation and analysis of medical images. Advanced image manipulation functions may include image segmentation, multimodality image registration, or 3D visualization. Complex quantitative functions may include semi-automated measurements or time-series measurements.(b)
Classification. Class II (special controls; voluntary standards—Digital Imaging and Communications in Medicine (DICOM) Std., Joint Photographic Experts Group (JPEG) Std., Society of Motion Picture and Television Engineers (SMPTE) Test Pattern).

0

Image /page/0/Picture/0 description: The image shows the logo of the U.S. Food and Drug Administration (FDA). On the left is the Department of Health & Human Services logo. To the right of that is the FDA logo, with the letters "FDA" in a blue square, followed by the words "U.S. FOOD & DRUG" in blue, and then the word "ADMINISTRATION" in a smaller font below.

Certis Health % Mark Job Responsible Third Party Official Regulatory Technology Services, LLC 1394 25th Street, NW Buffalo, Minnesota 55313

February 14, 2019

Re: K190074

Trade/Device Name: Presero 3D Scanning System Regulation Number: 21 CFR 892.2050 Regulation Name: Picture archiving and communications system Regulatory Class: Class II Product Code: LLZ, FXN Dated: January 14, 2019 Received: January 16, 2019

Dear Mark Job:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database located at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's

1

requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR 803) for devices or postmarketing safety reporting (21 CFR 4, Subpart B) for combination products (see https://www.fda.gov/CombinationProducts/GuidanceRegulatoryInformation/ucm597488.html; good manufacturing practice requirements as set forth in the quality systems (OS) regulation (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm.

For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/) and CDRH Learn (http://www.fda.gov/Training/CDRHLearn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (http://www.fda.gov/DICE) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone

(1-800-638-2041 or 301-796-7100).

Sincerely.

| Neil R | Digitally signed by Neil
R Ogden -S |
|----------|----------------------------------------|
| Ogden -S | Date: 2019.02.14
14:34:08 -05'00' |

For Binita S. Ashar, M.D., M.B.A., F.A.C.S. Director Division of Surgical Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

2

Indications for Use

510(k) Number (if known)

K190074

Device Name Presero 3D Scanning System

Indications for Use (Describe)

The Presero 3D Scanning System is an imaging tool that allows the processing, review, analysis, communication and media interchange of multi-dimensional digital images acquired from a 3D imaging device. It is indicated for the use of capturing visual images to measure the diameter, surface area, perimeter and volume of wounds. The Presero 3D Scanning System is designed for use by health care professionals and is intended to assist the healthcare professional who is responsible for making all final patient management decisions.

Type of Use (Select one or both, as applicable)

X Prescription Use (Part 21 CFR 801 Subpart D)

Over-The-Counter Use (21 CFR 801 Subpart C)

CONTINUE ON A SEPARATE PAGE IF NEEDED.

This section applies only to requirements of the Paperwork Reduction Act of 1995.

DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.

The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:

Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff@fda.hhs.gov

"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."

3

Image /page/3/Picture/0 description: The image shows the logo for CertisHealth. The logo consists of three overlapping ellipses in yellow and teal, followed by the word "CERTISHEALTH" in green. The word is written in a sans-serif font, with the letters "CERTIS" in a darker shade of green than the letters "HEALTH".

Section 5. 510(k) SUMMARY

SUMMARY OF SAFETY AND EFFECTIVENESS INFORMATION

Submitter's Name:Certis Health®
Submitter's Address:3630 Park Central Boulevard North
Pompano Beach, FL 33064
Submitter's Phone No:954-628-5908
Submitter's Fax No.954-206-1692
Regulatory Contact:Charnelle Thomas
Regulatory Consultant
404-360-6188

Mailing address for regulatory correspondence:
159 Lake Reserve Way
Canton, GA 30115 |
| Date of Preparation: | February 13, 2019 |
| Device Information:
Trade Name: | Presero™ 3D Scanning System |
| Common Name: | Imaging Software System |
| Classification Name: | Picture archiving and communications system |
| Review Category: | System, image processing, radiological 21 CFR
892.2050 (LLZ), 21 CFR 878.4160 FXN |
| Classification Panel: | Radiological |
| Regulatory Class: | Class II |
| Product Code: | LLZ, FXN |
| Legally marketed device
to which equivalency is
claimed: | EchoPixel True 3D Viewer (K142107) |

4

Image /page/4/Picture/0 description: The image shows the CertisHealth logo. The logo consists of three overlapping circles in yellow and green on the left, followed by the word "CERTISHEALTH" in green. The font is sans-serif and the letters are evenly spaced.

| Description of the device: | The Presero 3D Scanning System is a tablet-based system that
allows the processing, review, analysis, communication and
media interchange of multi-dimensional digital images acquired
from a 3D imaging device.
The Presero 3D Scanning System, does not contact the patient, nor
does it control any life sustaining devices. A physician, providing
ample opportunity for competent human intervention interprets
images and information being displayed and printed.
The Presero 3D Scanning System is comprised of a commercial off
the shelf 3D camera fitted on a commercial off the shelf tablet,
equipped with a proprietary software application that enables a
health care professional to visualize and interact with 3D wound
images, via a pen-like stylus, to assist in clinical decision making.
The complete system (tablet, camera and software) integrates with
a cloud back-end system. The cloud back-end system stores all
patient data, operator details and other information allowing 2-way
synchronization between the Presero 3D Scanning System and the
cloud with the ability to fully support multiple systems within a
single clinical facility. |
|----------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Indications for Use: | The Presero 3D Scanning System is an imaging tool that allows the
processing, review, analysis, communication and media interchange
of multi-dimensional digital images acquired from a 3D imaging
device. It is indicated for the use of capturing visual images to
measure the diameter, surface area, perimeter and volume of
wounds. The Presero 3D Scanning System is designed for use by
health care professionals and is intended to assist the healthcare
professional who is responsible for making all final patient
management decisions. |

5

Image /page/5/Picture/0 description: The image shows the logo for CertisHealth. The logo consists of three overlapping ellipses in yellow and green, followed by the word "CERTISHEALTH" in green sans-serif font. The ellipses are positioned to the left of the text, with the yellow ellipse encircling the two green ellipses.

SUMMARY OF SAFETY AND EFFECTIVENESS INFORMATION (Continued)

| Summary of
technological
characteristics
compared to
the predicate
device: | The Presero® 3D Scanning System is similar to the "primary" predicate device,
the EchoPixel True 3D Viewer (K142107) with regard to its intended use and
core technological characteristics with the exception of the source used to
obtain the 3D images and the type of images evaluated by health care
professionals in final patient management decisions. The Woundvision® Wound
Measuring and Monitoring device (K131596) is a "reference" device and has an
intended use and core technology that is also substantially equivalent to the
Presero® 3D Scanning System. | | |
|-------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Substantial | Primary Predicate | Reference Device | Subject Device |
| Equivalence: | Echo Pixel True 3D
Viewer
(K141207) | Wondvision Wound
Measuring &
Monitoring Device
(K131596) | Presero 3D Scanning
System |
| Intended Use: | Intended as a medical
diagnostic imaging
system that allows the
processing, review,
analysis,
communication and
media interchange of
multi-dimensional
digital images acquired
from CT or MR imaging
devices. It is also
intended as pre-
operative software for
simulating / evaluating
surgical treatment
options. The True 3D
Viewer is designed for
use by health care
professionals and is
intended to assist the
clinician who is
responsible for making
all final patient
management decisions. | The Scout is a
combination digital
camera and long-wave
infrared camera. The
digital camera is
indicated for the use of
capturing visual images
to measure the diameter,
surface area, and
perimeter of a part of the
body or two body
surfaces. The long-wave
infrared camera is
indicated for the use of
capturing thermal
images to measure the
thermal intensity data of
a part of the body or two
body surfaces: Both
components of the Scout
are non-contact with
respect to the patient
and provide an
adjunctive tool to help a
trained and qualified
health care professional | The Presero 3D
Scanning System is a
medical diagnostic
imaging system that
allows the processing,
review, analysis,
communication and
media interchange of
multi-dimensional
digital images acquired
from a 3D imaging
device. It is also
intended as a pre-
operative software for
evaluating treatment
options. The Presero
3D Scanning System is
designed for use by
health care
professionals and is
intended to assist the
healthcare professional
who is responsible for
making all final patient
management decisions. |
| | Primary Predicate
Echo Pixel
True 3D Viewer
(K142107) | Reference Device
Woundvision Wound
Measuring &
Monitoring Device
(K131596) | Subject Device
Presero 3D Scanning
System |
| Intended Users:
Intended
Environment for
Care: | Health Care
Professionals
Healthcare Facilities
such as hospitals and
clinics
Class II
21 CFR 892.2050; LLZ | Health Care
Professionals
Healthcare Facilities
such as hospitals and
clinics
Class I
21 CFR 878.4160; FXN | Health Care
Professionals
Healthcare Facilities
such as hospitals and
clinics
Class II
21 CFR 892.2050; LLZ |
| Image Analysis
Feature: | Image analysis features:
interactive
manipulation, tag,
annotate, measure,
segment | measure | Image analysis
features: interactive
manipulation, tag,
annotate, measure,
segment |
| Computer
Platform:
(minimum
platform) | HP Z440 Workstation | Minimum requirement:
Intel Core i5
3rd generation (or
equivalent) or better | Microsoft Surface Pro
4 or Microsoft New
Surface Pro |
| System
RAM: | 8 GB of system
memory; Nvidia
Quadro Graphics
Processing Unit (GPU)
with 4GB of video
memory | 4GB or greater | 8 GB of system
memory |
| Operating
System: | Windows 7 or 10
(64bit) | Windows 7 SP1 or later | Windows 10 (64bit) |
| Image
Acquisition: | CT and MR DICOM
Images | Scout imaging device | Intel RealSense 3D
camera |
| Performance
Data: | Every specification of the Presero® 3D Scanning Software has been validated
according to the company's documented development and test procedures. The
verification and validation testing conducted included testing to the following
applicable standards:
ISO/IEC/IEEE 29148:2011, Systems and software Engineering — Life
Cycle Processes — Requirements Engineering ISO/IEC/IEEE 24765:2010 - Systems and software engineering - | | |

6

Image /page/6/Picture/0 description: The image shows the logo for CertisHealth. The logo consists of three overlapping ellipses in different shades of green and yellow on the left. To the right of the ellipses is the word "CERTISHEALTH" in green sans-serif font.

7

Image /page/7/Picture/0 description: The image shows the logo for CertisHealth. The logo consists of three overlapping circles in shades of green and yellow on the left. To the right of the circles is the word "CERTISHEALTH" in green. The first part of the word, "CERTIS", is a darker shade of green than the second part, "HEALTH".

| | Vocabulary IEC 62304:2006+AMD1:2015 CSV, Medical Device software –
software Life-Cycle Processes NEMA PS 3.1 - 3.20 (2016), Digital Imaging and Communications in
Medicine (DICOM) Set PS 3.1 IEC 60601-1-2 Edition 4.0 2014-02 Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential
performance - Collateral Standard: Electromagnetic disturbances -
Requirements and tests ANSI AAMI ES60601-1:2005/(R)2012 and A1:2012,
C1:2009/(R)2012 and A2:2010/(R)2012 (Consolidated Text) Medical
electrical equipment - Part 1: General requirements for basic safety
and essential performance (IEC 60601-1:2005, MOD) Verification and validation testing were completed in accordance with the
company's Design Control process in compliance with 21 CFR Part 820.30,
which included testing that fulfills the requirements of FDA "Guidance on
Software Contained in Medical Devices". Potential risks were analyzed and
satisfactorily mitigated in the device design. Verification and validation was
performed on qualified device as well as in simulated use conditions |
|--------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Conclusions: | The Presero® 3D Scanning System is substantially equivalent to the primary
predicate device with regards to intended use and technological characteristics.
It is also substantially equivalent to the reference device. Results of
performance testing demonstrated that the device met the design requirements
and as well as the user needs |