(50 days)
Not Found
No
The device description and summary of performance studies focus on the mechanical properties and materials of a bone screw system, with no mention of AI or ML.
No.
The device is described as a bone screw system intended for mechanical support in fracture repair, fusions, and osteotomies, rather than for therapeutic treatment.
No
Explanation: The device is a bone screw system intended for the repair of fractures, fusions, and osteotomies, which are therapeutic interventions rather than diagnostic procedures.
No
The device description explicitly states it is a "bone screw system consisting of solid and cannulated screws" and describes physical components made of Ti-6AI-4V ELI alloy, which are hardware implants.
No, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- Intended Use: The intended use clearly states the device is for "repair of fractures, fusions and osteotomies of bones and bone fragments." This is a surgical intervention, not a diagnostic test performed on samples taken from the body.
- Device Description: The device is described as a "bone screw system" made of metal, designed to be implanted into the body. This is a medical device used for structural support and fixation, not for analyzing biological samples.
- Lack of IVD Characteristics: The description does not mention any of the typical characteristics of an IVD, such as:
- Analyzing biological samples (blood, urine, tissue, etc.)
- Detecting or measuring substances in those samples
- Providing information for diagnosis, monitoring, or screening
The AURORA™ Screw System is a surgical implant, specifically a bone screw system.
N/A
Intended Use / Indications for Use
The AURORA™ Screw System is intended to aid in the repair of fractures, fusions and osteotomies of bones and bone fraqments.
Product codes
HWC
Device Description
The AURORA™ Screw System is a bone screw system consisting of solid and cannulated screws for treatment and fixation of fractures, fusions and osteotomies of bones in the Foot, Ankle, Hand, and Wrist.
The screws are available in different diameters from Ø2.7mm to Ø7.5mm, are solid or cannulated with lengths ranging from 18mm to 160mm. All screws are manufactured from Ti-6AI-4V ELI alloy (ASTM F136-13). Optional washers are available for certain screws; the washers are also made from Ti-6AI-4V ELI alloy (ASTM F136-13).
The screws and washers are intended to be implanted until bone healing. Implants are single use and the system is provided non-sterile.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
Foot, Ankle, Hand, and Wrist.
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies
The following performance data were provided in support of the substantial equivalence determination.
- Mechanical testing (ASTM F543)
- Engineering Analysis
Key Metrics
Not Found
Predicate Device(s)
K151021, K131324, K082574, K060428
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 888.3040 Smooth or threaded metallic bone fixation fastener.
(a)
Identification. A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system.(b)
Classification. Class II.
0
December 18, 2018
Image /page/0/Picture/1 description: The image contains the logo of the U.S. Food and Drug Administration (FDA). On the left is the seal of the Department of Health & Human Services. To the right of that is the FDA logo, which consists of the letters "FDA" in a blue square, followed by the words "U.S. FOOD & DRUG" in large blue letters, and the word "ADMINISTRATION" in smaller blue letters below.
MiRus, LLC Jordan Bauman Director of Regulatory Affairs and Quality 2150 Newmarket Parkway SE, Suite 108 Marietta, Georgia 30067
Re: K182989
Trade/Device Name: AURORA™ Screw System Regulation Number: 21 CFR 888.3040 Regulation Name: Smooth Or Threaded Metallic Bone Fixation Fastener Regulatory Class: Class II Product Code: HWC Dated: October 26, 2018 Received: October 29, 2018
Dear Jordan Bauman:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database located at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination. product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR 803) for devices or postmarketing safety reporting (21 CFR 4, Subpart B) for combination products (see
1
https://www.fda.gov/CombinationProducts/GuidanceRegulatoryInformation/ucm597488.htm); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm.
For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/) and CDRH Learn (http://www.fda.gov/Training/CDRHLearn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (http://www.fda.gov/DICE) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100).
Sincerely,
Image /page/1/Figure/5 description: The image shows a digital signature. The signature is for Jesse Muir -S. The date of the signature is December 18, 2018, and the time is 14:54:04 -05'00'.
For: Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
2
5. Indications for Use Statement
DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration
Indications for Use
Form Approved: OMB No. 0910-0120 Expiration Date: 06/30/2020
See PRA Statement below.
510(k) Number (if known)
Device Name
AURORA™ Screw System
Indications for Use (Describe)
The AURORA™ Screw System is intended to aid in the repair of fractures, fusions and osteotomies of bones and bone fraqments.
Type of Use (Select one or both, as applicable)
Prescription Use (Part 21 CFR 801 Subpart D)
□Over-The-Counter Use (21 CFR 801 Subpart C)
CONTINUE ON A SEPARATE PAGE IF NEEDED.
This section applies only to requirements of the Paperwork Reduction Act of 1995.
DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.
The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:
Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff(@fda.hhs.gov
"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."
FORM FDA 3881 (7/17) Page 1 of 1
3
6. 510(k) Summary
This 510(k) summary is being submitted in accordance with the requirements of 21 CFR 807.92(c).
| I. SUBMITTER | MiRus™™, LLC
2150 Newmarket Parkway SE
Suite 108
Marietta, Georgia 30067
Tel: (678)-324-6272
Fax: (678) 401-5607 |
|----------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| II. OFFICIAL CORRESPONDENT | Jordan Bauman
Director of Regulatory Affairs and Quality
MiRus™™, LLC
2150 Newmarket Parkway SE
Suite 108
Marietta, Georgia 30067
Tel: (678)-324-6272
Fax: (678) 401-5607 |
| III. DATE PREPARED | October 26, 2018 |
| IV. DEVICE
Name of Device
Common Name
Classification Name
Regulatory Class
Product Codes
Submission Type | AURORA™ Screw System
Fixation Bone Screw System
21 CFR §888.3040: Smooth or threaded
metallic bone fixation fastener
Class II
HWC
Traditional 510(k) |
| V. PREDICATE DEVICE | Osteomed Cannulated Screw System (K151021 -
primary predicate)
MAXTORQUE™ Screw System (K131324)
MAXTORQUE™ MINI Cannulated Screw System
(K082574)
CSS Cannulated Screw System (K060428) |
VI. DEVICE DESCRIPTION
The AURORA™ Screw System is a bone screw system consisting of solid and cannulated screws for treatment and fixation of fractures, fusions and osteotomies of bones in the Foot, Ankle, Hand, and Wrist.
The screws are available in different diameters from Ø2.7mm to Ø7.5mm, are solid or cannulated with lengths ranging from 18mm to 160mm. All screws are manufactured from
4
Ti-6AI-4V ELI alloy (ASTM F136-13). Optional washers are available for certain screws; the washers are also made from Ti-6AI-4V ELI alloy (ASTM F136-13).
The screws and washers are intended to be implanted until bone healing. Implants are single use and the system is provided non-sterile.
VII. INDICATIONS FOR USE
The AURORA™ Screw System is intended to aid in the repair of fractures, fusions and osteotomies of bones and bone fragments.
VIII. PREDICATE DEVICE COMPARISON
The documentation provided shows that the MiRus™ AURORA™ Screw System is substantially equivalent to the predicate devices in intended use, indications for use, materials, technological characteristics and labeling.
IX. PERFORMANCE DATA
The following performance data were provided in support of the substantial equivalence determination.
- Mechanical testing (ASTM F543) ●
- Engineering Analysis .
X. CONCLUSONS
The MiRus™ AURORA™ Screw System does not raise any new questions of safety or efficacy when compared to the predicate device(s). The AURORA™ Screw System has demonstrated that it is substantially equivalent in mechanical performance, indications for use, intended use, technological characteristics, materials and labeling to legally marketed predicate devices.