(189 days)
Not Found
No
The description focuses on the material and mechanical properties of the implant and the validation uses Finite Element Analysis, not AI/ML. There is no mention of AI, ML, or related concepts in the provided text.
Yes
The device is indicated for intervertebral body fusion in patients with degenerative disc disease of the cervical spine with accompanying radicular symptoms. This indicates it is used for treatment, which aligns with the definition of a therapeutic device.
No
The Summit Spine Channel Cervical Interbody Fusion System is described as a device for intervertebral body fusion, intended to facilitate fusion in patients with degenerative disc disease. Its purpose is therapeutic (fusion), not diagnostic (identifying or determining the nature of a disease).
No
The device description explicitly states the system consists of physical implant components made of PEEK and tantalum markers, which are hardware.
Based on the provided text, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- Intended Use: The intended use is for intervertebral body fusion in the cervical spine. This is a surgical procedure involving the implantation of a device into the body.
- Device Description: The device is described as an implant made of PEEK with tantalum markers. This is a physical implant designed to be placed within the body.
- Lack of IVD Characteristics: The description does not mention any of the typical characteristics of an IVD, such as:
- Analyzing samples from the human body (blood, urine, tissue, etc.).
- Providing information about a physiological or pathological state.
- Being used in vitro (outside the living body).
The device described is a surgical implant used to facilitate bone fusion, which falls under the category of medical devices, but not specifically In Vitro Diagnostics.
N/A
Intended Use / Indications for Use
When used as a cervical intervertebral body fusion device, the Summit Spine Channel Cervical Interbody Fusion System is indicated for intervertebral body fusion in skeletally mature patients with degenerative disc disease (DDD) of the cervical spine with accompanying radicular symptoms at one disc level from the C2-C3 disc to the C7-TI disc. DDD is defined as discogenic pain with degeneration of the disc confirmed by history and radiographic studies. The device system is designed for use with supplemental fixation (e.g.anterior cervical plate)and with autograft to facilitate fusion. Patients should have at least six (6) weeks of non-operative treatment with an intervertebral cage.
Product codes
ODP
Device Description
The Summit Spine Channel Cervical Interbody Fusion System will be offered in various device configurations based on surgical approach and patient anatomy, and consist of a Summit Spine cervical interbody implant, which may be implanted as a single device via an anterior approach.
The Summit Spine Channel Cervical Interbody Fusion System is comprised of various device configurations designed to accommodate patient anatomy and provide the surgeon with different surgical approach options.
The Summit Spine Channel Cervical Interbody Fusion System implant components are made of polyether ether ketone (Evonik Vistakeep) that conforms to ASTM F2026. Additionally, the devices contain tantalum markers (ASTM F560) to assist the surgeon with proper placement of the device. The additional implant offering being proposed has similar technological characteristics and identical indications as the currently cleared product line.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Radiographic studies
Anatomical Site
cervical spine, disc level from the C2-C3 disc to the C7-TI disc
Indicated Patient Age Range
skeletally mature patients
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies
A Finite Element Analysis tool was used to validate the worst case. The FEA demonstrated that the Channel Cervical Interbody Fusion System implant with the smallest footprint and the tallest height (14mm) exhibited higher stresses under load to that of the 5mm high implant with the same footprint. The worst case was subjected to the following tests: ASTM F2077-14 Static Axial Compression, Dynamic Axial Compression, Static Torsion, Dynamic Torsion, and ASTM F2267-04(2011) Subsidence testing on the Summit Spine 14mm Cervical Cage and 5mm Cervical Cage.
Key Metrics
Not Found
Predicate Device(s)
Eminent Spine K090064
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 888.3080 Intervertebral body fusion device.
(a)
Identification. An intervertebral body fusion device is an implanted single or multiple component spinal device made from a variety of materials, including titanium and polymers. The device is inserted into the intervertebral body space of the cervical or lumbosacral spine, and is intended for intervertebral body fusion.(b)
Classification. (1) Class II (special controls) for intervertebral body fusion devices that contain bone grafting material. The special control is the FDA guidance document entitled “Class II Special Controls Guidance Document: Intervertebral Body Fusion Device.” See § 888.1(e) for the availability of this guidance document.(2) Class III (premarket approval) for intervertebral body fusion devices that include any therapeutic biologic (e.g., bone morphogenic protein). Intervertebral body fusion devices that contain any therapeutic biologic require premarket approval.
(c)
Date premarket approval application (PMA) or notice of product development protocol (PDP) is required. Devices described in paragraph (b)(2) of this section shall have an approved PMA or a declared completed PDP in effect before being placed in commercial distribution.
0
Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is an abstract symbol representing the human form, composed of three stylized profiles facing to the right.
Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002
June 20, 2017
Summit Spine Eric Buescher Owner 2333 Airport Rd. Georgetown, Texas 78628
Re: K163494
Trade/Device Name: Summit Spine Channel Cervical Interbody Fusion System Regulation Number: 21 CFR 888.3080 Regulation Name: Intervertebral Body Fusion Device Regulatory Class: Class II Product Code: ODP Dated: May 14, 2017 Received: May 19, 2017
Dear Mr. Buescher:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA). it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical devicerelated adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
1
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.
Sincerely,
Vincent J. Devlin -S
for Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
2
Indications for Use
510(k) Number (if known)
Device Name
Summit Spine Channel Cervical Interbody Fusion System
Indications for Use (Describe)
When used as a cervical intervertebral body fusion device, the Summit Spine Channel Cervical Interbody Fusion System is indicated for intervertebral body fusion in skeletally mature patients with degenerative disc disease (DDD) of the cervical spine with accompanying radicular symptoms at one disc level from the C2-C3 disc to the C7-TI disc. DDD is defined as discogenic pain with degeneration of the disc confirmed by history and radiographic studies. The device system is designed for use with supplemental fixation (e.g.anterior cervical plate)and with autograft to facilitate fusion. Patients should have at least six (6) weeks of non-operative treatment with an intervertebral cage
| Type of Use (Select one or both, as applicable) | |
|---|---|
| Prescription Use (Part 21 CFR 801 Subpart D) | Over-The-Counter Use (21 CFR 801 Subpart C) |
CONTINUE ON A SEPARATE PAGE IF NEEDED.
This section applies only to requirements of the Paperwork Reduction Act of 1995.
*DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW *
The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:
Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff@fda.hhs.gov
"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."
3
5.510(K) SUMMARY
| Submitter's Name: | Summit Spine LLC |
|---|---|
| Submitter's Address: | 2666 Airport Road |
| Georgetown, Texas 78628 | |
| Submitter's Telephone: | 512-208-9272 |
| Submitter's Fax: | 877-329-1362 |
| Contact Name: | Eric Buescher |
| Date Summary was | |
| Prepared: | June 16 2017 |
| Trade or Proprietary Name: | Summit Spine Channel Cervical Interbody Fusion System |
| Common or Usual Name: | Intervertebral Fusion Device, Cervical |
| Classification: | Class II per 21 CFR §888.3080 |
| Product Codes: | ODP |
| Classification Panel: | Orthopedic and Rehabilitation Devices Panel |
| Legally Marketed (predicate) device: | Eminent Spine K090064 |
DESCRIPTION OF THE DEVICE SUBJECT TO PREMARKET NOTIFICATION:
The Summit Spine Channel Cervical Interbody Fusion System will be offered in various device configurations based on surgical approach and patient anatomy, and consist of a Summit Spine cervical interbody implant, which may be implanted as a single device via an anterior approach.
INDICATIONS FOR USE
When used as a cervical intervertebral body fusion device, the Summit Spine Channel Cervical Interbody Fusion System is indicated for intervertebral body fusion in skeletally mature patients with degenerative disc disease (DDD) of the cervical spine with accompanying radioular symptoms at one disc level from the C2-C3 disc to the C7-TI disc. DDD is defined as discogenic pain with degeneration of the disc confirmed by history and radiographic studies. The device system is designed for use with supplemental fixation (e.g. anterior cervical plate) and with autograft to facilitate fusion. Patients should have at least six (6) weeks of non-operative treatment prior to treatment with an intervertebral cage.
4
TECHNICAL CHARACTERISTICS
The Summit Spine Channel Cervical Interbody Fusion System is comprised of various device configurations designed to accommodate patient anatomy and provide the surgeon with different surgical approach options.
The Summit Spine Channel Cervical Interbody Fusion System implant components are made of polyether ether ketone (Evonik Vistakeep) that conforms to ASTM F2026. Additionally, the devices contain tantalum markers (ASTM F560) to assist the surgeon with proper placement of the device. The additional implant offering being proposed has similar technological characteristics and identical indications as the currently cleared product line.
PERFORMANCE DATA
A Finite Element Analysis tool was used to validate the worst case. The FEA demonstrated that the Channel Cervical Interbody Fusion System implant with the smallest footprint and the tallest height (14mm) exhibited higher stresses under load to that of the 5mm high implant with the same footprint. The worst case was subjected to the following tests: ASTM F2077-14 Static Axial Compression, Dynamic Axial Compression, Static Torsion, Dynamic Torsion, and ASTM F2267-04(2011) Subsidence testing on the Summit Spine 14mm Cervical Cage and 5mm Cervical Cage.
CONCLUSION
The overall technology characteristics and mechanical performance data lead to the conclusion that Summit Spine Interbody Fusion System is substantially equivalent to the Eminent Spine Fusion System.